the Beltway. hp dvdram gt30l sata cdrom is disabled somehow... Troubleshooting directs me to contact hp

Similar Questions

• HP DVDRAM GT50N SATA CdRom

  I have a HP Pavilion g6 - 1d96nr Notbook PC.  I want to know if the DVD burner in my laptop (hp DVDRAM GT50N SATA CdRom) is capable of burning DVD double layer.  Thank you.

  Hello

  According to me, it does, but you can visualize all the multimedia capabilities of your optical drive using the free app at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• relocation of dvdram gt50n sata cdrom

  My dvdram gt50n sata cdrom is missing. How can I reinstall it? It is not able to solve the problem of troubleshooting. How can I solve this problem? Help, please.

  Hi Danilo,

  The question could have occurred after you installed, uninstalled or updated a program or you updated Windows.

  . Did you recent hardware or software changes to your computer before the show?

  Follow the steps described in the links below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/kb/314060

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://windows.microsoft.com/en-US/windows7/Back-up-the-registry.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• The portfolio button disabled somehow Edit

  

  Expert Hi ~

  As on the screenshot above, my portfolio edit button is disabled somehow. I can't delete emails from my portfolio.

  I remembered to use this button before...

  The portfolio is create from OUTLOOK 2010 using Acrobat Suite 10.0 Profession.

  I installed on the SCCM server using the license of the company. Wouldn't be a kind of policy thrust of the server?

  How can I check if there is something wrong?

  Thank you very much!

  You cannot change the portfolios created by the PDFMaker email client plugins. The use of a particular scheme that is not available in Acrobat itself.

• Media in the CD/DVD drive is not readable (hp DVDRAM GT30L)

  Hello guys. This is my first post in this forum.

  I already ran the Microsoft fixit CD/DVD drive and the problem is the media in the CD/DVD drive is not readable (hp DVDRAM GT30L). I also tried the DVD in my desktop DVD player and stands so the problem is in the CD-ROM of the laptop.

  Hello Blue_Cloud213,

  Welcome to the HP Forums!

  I understand that the computer is unable to read the CD and DVD. Since you reduced the problem to only one computer, please try all the steps in this document from HP: disk impossible reading disks (Windows 7)

  Please let me know what happens. Thank you!

  Mario

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DVDRAM GT30L Driver does not

  It cannot burn dvd.  DVDRAM GT30L pilot have an error message". Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "where can find driver > yes I tried to install, but it won't work."   Runing Window 7 Pro on a laptop Pavilion dv6 Notebook PC

  http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm

  Delete registry UpperFilters and LowerFilters values. A frequent cause of error Code 19 is the corruption of two registry values in the registry keyof class of the CD-ROM/DVD-ROM drive.

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

• Adding another SATA CDROM to XPS 8900

  I added an additional SATA CDROM to my 8900.  They both work but I'm curious to know what SATA ports on the motherboard are optimal for the CDROMs to plug.  Thank you.

  Hello!  CD-ROM can only send and receive data much, much less then the max of a SATA 3 Port and even less SATA 6 ports which seem to be in your computer, so you don't have to worry about port to use.

• HL-DT-ST DVDRAM GT32N SCSI CdRom Device does not work correctly

  Hello

  I have this unit in my ASUS laptop: HL-DT-ST DVDRAM GT32N SCSI CdRom Device,.

  and it is not read most of the inserted discs. Prints are better, but is not able to read one of my CDs or DVDs written at home.

  A few years ago I tried to solve the problem and that I can remember other users had the same problem and the driver update has been recommended, but I also discovered that the support for this product is complete, and I couldn't find all the archives. I dropped.

  Now I'm able to download a driver is already installed on the computer that has the version number: 6.1.7600.16385.

  I suppose that there could be problems other than the driver himself.

  Help, please!

  Hello

  Try to clean the disc with a cleaning disc.

  If cleaning doesn't help not the drive has a hardware problem, since it corresponds sporadically.
  For discs do you you try to use the format of the ISO image.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  =====================

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• device internal HP DVDRAM GT30L

  Hello

  can I burn dual layer 8.4 GB whit the internal device of my portable DVD (probook 4520 s) hp DVDRAM GT30L?

  Its because I did a dvd film and it's 8GB

  Thank you, the software I already have.

• During the Windows installation, I received the following message: Boot Record from CDROM tree research... OK press a key to boot from CD... Error loading operating system

  What is the cause of this error message

  during the installation of the operating system on a single computer, I met the following error message
  "The research tree Boot Record from CDROM... Ok
  Press any key to boot from CD... Error loading operating system"
  What are the causes of this error?

  Hi DavidMuya,

  To stop this message from appearing, follow these steps:

  (a) remove any CD from the drive before you turn on or restart the computer.

  (b) enter the BIOS and change the boot hard drive sequence instead. You will need to change if you plan to boot from a CD in the future.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• continuously appears with the message that my WiFi (Wireless LAN) is disabled

  My HP Connection Manager opens with the message that my WiFi (Wireless LAN) is disabled permanently, but I have no problem to connect my computer to the signal from my Belkin.b23 plug in router set wireless.  I am able to browse internet while I'm typing.  Should I worry about this message?  If so, I don't have the first clue about the activation of this feature.

  Hello

  1. don't you make changes to the computer?

  2. which version of the operating system are you using?

  3. What is the full error message you get?

  4. do the icon windows brand of task red bar see the notification in wireless?

  Try to uninstall and reinstall the HP Connection Manager software and check if the problem persists.

  See the site mentioned below for the procedure to uninstall a program:

  http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program.

  If the problem persists try help on the HP forum site mentioned below:

  http://h30434.www3.hp.com/.