The best location to store scripts ghettoVCB on ESXi 4.1.0

Similar Questions

• What would be the best approach to store the contents of an application

  Hi all,
  
  Whereas there are certain restrictions on the University Complutense of MADRID since the limit of files in a folder (max. 1000), that would be the best approach to store the contents of a request, for example? Is it possible to store the content with a logic of separation?
  
  Kind regards

  Maybe that I miss the question, but I think you are looking for a good definition of the metadata model or same good architecture of content server instances themselves.

  You wrote that you have lots of files from one application (1200 check-ins per day) and you are limited by the recommendation to have maximum 1000 files in a folder. It is a bit of a mix of apples and oranges. Records are a logical representation of file storage, who must somehow match what users a) are used for b) is useful to organizational processes. If it makes no sense in the context of your organization - just don't use them. At the University Complutense of MADRID, he must be. Unlike, the University Complutense of MADRID must always have a metadata model, and if the content search is one of your typical use cases, it is a starting point.

  You mentioned you want to separate an application an application documents X documents Y - that sounds like you have a metadata field called, for example, 'Application', which will contain the appropriate value. Unfortunately, you write more detail, so I'll make my scripts:

  -Imagine you have users who work areas or countries interested only in 'their' data - sounds like a need for one or more fields to represent this type of separation (country - State - City - whatever)
  -now, you might have another group of users who are more focused on the product; They also want to see 'their' data, but this time, the main search criteria are different (product line - product - Version - Batch, etc..)

  At the University Complutense of MADRID, you can serve both groups - you can create research and recording of profiles that meet the needs of these two types of users. It's actually more convenient than using the folders because you can have multiple views on the same repository.

  It is a "but" to this approach and that's if you want to use Desktop Integration after the check in documents from Office applications (Word, Excel). In this case, you will need records.

  However, even, there is a solution that might help: note that, so far, I expect to have a single repository (a single instance of the University Complutense of MADRID) serving all your applications. In theory, you could have a few instances UCM running in the same environment (the same number of licenses CPU, if you want). Therefore, the main criterion will be the name of the server instance of content rather than a metadata field. Another thing to consider if you want your "desktop users" for access to "all files" in the repository. Note that even if you use folders you can have files that are not assigned to any folder.

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• The best location for vcenter VM and placeholder data warehouses

  Hello

  I have an SRM installation with 2 sites.  The sites are separated by metro trunk of layer 2 ethernet between the sites.

  Site has

  1 EqualLogic PS6100

  2 ESX servers configured as cluster

  There is a single data store volume over the San with all virtual machines in this cluster

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  There are also a few other volumes on the SAN used for the RDM disks in virtual machines

  I also created a small volume of 1 GB as a VMFS data store and have it mapped in SRM to use as a placeholder for a data store

  What are your thoughts on that?  Is this the best way?  I could use the local storage on the ESX servers?  Main VM can be used for fictional settings or my data store?

  SRM is installed on the same VM as vCenter

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Site B

  1 EqualLogic PS4100

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  The number of volumes on the SAN and their goals is the same Site A, the only difference is the size of the volume is smaller because less machines virtual running on this site.

  Replication has been implemented and verified the bi-directional working.

  We use replication on Bay

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Can someone suggest a better configuration?

  Thank you

  Brian

  Hello

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  What are your thoughts on that?  Is this the best way?

  In addition to vCenter VMS residing on the store of data replicated, it's OK.

  I could use the local storage on the ESX servers?

  I think that you can, but it is not recommended, because it creates dependency on the availability of the single ESX host.

  Main VM can be used for fictional settings or my data store?

  I would not recommend this. This will create a mess on the data store. Continue to 1 GB placeholder data store you created and do not replicate.

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Consider that SQL express is adapted to the environment of very small size (don't remember the numbers now). Make sure that you do not exceed the limits.

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  This host has sufficient capacity to run all the virtual machines together (Site A and Site B)?

  I recommend having two hosts for prallele and accelerate the recovery process (multiple virtual machines can be powered on simultaneously).

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  You don't have to configure them in bound Mode. This is for ease of management only (license, roles and inventory)

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  Yep, do not put vCenter VM on the VMS data store and reproduce at all.

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Do not replicate vCenter / SRM VM and that will not happen.

  Michael.

• What is the best way to store my Canon MX922? I'm not going to use it for several months (6 +).

  I don't use my printer for many months.  What is the best way to keep?  Leave the ink cartridges in the printer?  Get out them?  Store cartridges almost nine in a bag made of plastic?

  Hi mmosher,

  If your PIXMA MX922 should not be used for an extended period of time, please put your PIXMA MX922 using the power button on the unit.  It will be a "cap" of the ink tanks, so they will be ready to use when you print with your PIXMA MX922 once again.  No further action is required.

• the best location for cache performance LR

  I put my catalogs on a dedicated SSD LR6. What is the best place to keep the cache with performance in mind?

  Thank you

  Hi pjbraune,

  The preview cache would be stored in the same location as your catalog however, the camera raw cache should be stored on a hard drive faster.

  See this article for optimization: How to improve and accelerate the performance of Photoshop Lightroom

  Kind regards

  Claes

• What is the best place to store global constants?

  Hello

  I want to store some constants and access through procedures and functions, which would be the best place to do this? I thought that the chains of substitution might work, but it does not work for me in my procedures. Can we use the Substitution string in code compilation such as procedures and functions? I use SQL developer to write procedures.

  See you soon

  Hello

  Table is good if 'permanent' could change so you can create the form of the APEX to maintain those.

  You can also use package specifications just for constants for example

  CREATE OR REPLACE
  PACKAGE MY_GLOBALS
  AS
    g_const_1 CONSTANT DATE := TRUNC(SYSDATE) + 365;
    g_const _2 CONSTANT VARCHAR2(30) := 'somestring';
  END;
  

  Then, you can see in the procedures, functions and processes APEX as (package_name.constant_name) MY_GLOBALS.g_const_1.

  Kind regards

  Jari

• where is the best place to store my information

  I migrated to the new version of the macbook, I am very happy, but the new macbook can not read the external hard drive I used to back up. It could be the fact that I need to use an adapter for USB, I'm looking for suggestions on where would be the best place for me save my information.

  What your old drive to backup link use: Firewire, perhaps? There is no adapter for FW on USB, so you can get a new enclosure that supports USB 3 then move the backup disk in the new case assuming that the disk is a SATA drive. Otherwise, buy something new to use for your backup.

• What is the best location of vcenter in my scenario

  Hello

  I need a tip for the best placement of vCenter and root DC.

  New installation: 2 ESXi, VMware ESX. Currently 2 DCs, AD 2003 vm. There are the new 2008 physical dedicated server for backup with Ribbon attached.

  BackupExec software is not yet installed.

  1. what will be the best placement of vCenter. Server backup that should be running BackupExec software or virtual machine?

  2. it is advisable for all to place vCenter with BackupExec (with SQL server) on the physical machine?

  3 - is a good idea to assign the role of DC (2008 AD) on a physical server with BackupExec?

  Please specify each response with advantages and disadvantages.

  Thank you.

  Michael.

  If you have no license limitation, I suggest to have dedicated VM for DCs, DHCP and vCenter Server.

  DNS servers can stay with the domain controllers.

  On your backup server, you can have a physical DC on it (I see this solution several times).

  But if you virtual AD leasts two DC on different hosts, so it isn't really needed.

  On vCenter in virtual, see also:

  http://communities.VMware.com/docs/doc-11197

  André

• The best location for the .vswp file

  I use RecoveProint EMC to replicate my virtual machine for use with MRS. While the implimentaion of EMC RecoverPoint recommended that we allocate a hard sepperate for pagefile guest on a non replicated operating system LUN as the page file on the guest has been constantly evolving.  We have seen a significant reduction in the rate change that enabled us to reach the RPO we were after and with our bandwidth allocated for replication.  I am able to reproduce the LUN for the swap of OS files once and leave.   I'm utilizeing now the option "Migrate storage" with in VCenter to consolidate the VM running on a given LUN and I noticed that when I move a hard to the BONE (not hard for the OS swap) two hard files are transferred to the new location.  Then I discovered that to move one of the files hard for a given virtual machine I have to turn off the virtual machine and to migrate the only hard.  Not perfect, but whatever. To do this, I noticed that the "VM workplace" has been changed to the location of my guest operating system swap file hard.

  It asked if it is a good place for hosting the .vswp.  The .vswp has a significant amount of change as well?  And as the OS swap hard matches the basically wiped clean during a restart?

  Hope it makes sense.

  The .vswp file is created on the virtual machine market. Its size is equal to the amount of UNRESERVED vRAM. This means that if you have a virtual machine with 4 GB of vRAM, but 3 GB is reserved, the .vswp is 1 GB. The .vswp is used as a last resort, if there is a physical RAM memory conflict. It is called after the transparent page sharing or balooning. If you allocate no more of RAM physical vRAM, then it will never be used. BUT, it is removed turn off power and created on the power. If the virtual machine is always on, so no worries with a bandwidth of replication.

  You can place files .vswp on local storage or a separate logical unit number. As Andrew said, you can make this a whole cluster framework if you want. It's all about management. If you are comfortable with it being separated from the .vmx, nvram, etc.. Usually, the concern is the amount of what is essentially lost a costly LUN disk, so it is moved to the cheaper SCSI disk. Assuming that there is no oversubscription of RAM, it will never be used. Rather than taking up valuable disk space, why not just use a reserve of memory in order to avoid its use definitely?

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• What is the best way to store the time of appointment in the calendar

  I use apex 5 universal theme.

  Oracle 11gxe.

  I need apex calendar to view the calendar...

  Do I need to use the ekinitech calendar plugin

  Or is it possible to implement

  http://fullcalendar.IO/

  I'm not aware of the java scripts, but I think I can try

  Any guidance appreciated and thank you

  Hi pauljohny100,

  There is an easy way to implement a FullCalendar.

  Take a look: https://apex.oracle.com/pls/apex/f?p=90561:1

• The best place to store the files in Web site on his computer?

  In years past, I stored all my files from site Web on C: > program leader > * name of site *. However, which began in the days of Windows 98 and Windows 10 you now have 'the PC' section of documents, photos, videos, etc. I have problems of permissions with registration from now files on my C: drive, and it becomes a royal pain. I was just thinking to move my Web sites off of the C: root on my computer and in one of my other sections of the computer. But my sites have photos, documents and video clips, to set up my new site location does not really fit into one of the other existing sections. I just wanted to know what path on the computer and others set up their website information? I might be able to spare me headaches in the future. Thank you.

  Dr_Atomic wrote:

  I set up a Sites folder directly on my root of the C: drive and managed to save a file to it. Then why I would be able to do the same thing except Program Files located under C:, too?  Some obscure regulation of Microsoft or something? So I'm just going to drag and drop all three of my sites the in my new folder "Sites" under my root of the C: drive. Sound good?

  You should never put anything directly in the Program Files folder. It is not an obscure regulation of Microsoft. It is there to protect you against malware surreptitiously added to your operating system.

  The Program Files folder is for program files (in other words, the software that runs on your computer). It is not for arbitrary files that you create yourself. Put all your sites the in C:\Sites is a good organization.

• best way to store, present the date and time of entry into

  Hello!
  
  I hope that I can make clear. I see an APEX application that has a couple of different date type fields. This demand will be translated in two different languages, which has representations different date/time. For example: hh12:miAM DD-MON-yyyy and yyyy-mm-dd hh24. I am now find what is the best way to store the date/time fields and hou I can present them in a form/report and how the user can enter in a field.
  
  That's what I see:
  -I can set a time stamp request format date format/application. It must be in the format of the main language, in this case, English.
  -I can also make translated versions of the application. QUESTION: can I enter a different date for the translated application format?
  
  What should I do my fields of type date or timestamp?
  
  I hope someone can answer. If I'm not clear, please tell me!

  You can set the format of date of application using an element of demand

  & DATE_FORMAT_MASK.

  and this element the value dynamically.

  Home > Application Builder > Application # > shared components > change attributes of globalization

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Large enough string - what is the best way to apply

  Hi guys,.

  I have user agreement which is about 1300 characters, could someone please tell me the best way to store and retrieve? and also view it.

  I don't want to cramp, the memory of the blackberry. I build on the JDE version 4.5.

  Thanks in advance.

  the solution that I opted for a similar problem had to include the agreement, entirely in the format, in html format in the project.

  I use the browser to view it then.

• How the best way to keep the information user´s?

  Hello people.
  In my application, I use the method getDBTransaction () .getSession (). getUserData() to store user information, such as the ID, user name, etc...
  However when my application is used by more than 20 users. Application loses the information in session variables very often. In most cases the user session is lost in less than 2 minutes of use. Some entities in my application using this information to fuel elements of the entities which are necessary for the table, so that the application generates errors like Houston-27014 and Houston-25017.
  I wonder what the best way to store this information so that I can use the methods of the data model and user interface methods.
  
  Thank you once again.
  
  Willian

  What is described in the [docs here: http://download.oracle.com/docs/cd/E15051_01/web.1111/b31974/bcstatemgmt.htm#sm0495]

  Timo