The best way to remove/uninstall a double installation of Firefox (1 current to be preserved, 1 old/obsolete version which turned out Secunia be eliminated)?

I had not considered the release of Secunia PSI in awhile until yesterday and was surprised to discover that he pointed out an old version of Firefox (v27.x) that was obsolete and should be removed. The installation path for this v27.x entry is in a completely different subdirectory structure of Firefox C:\Program Files (x 86) \Mozilla in which resides the current installation of v36.0.1 - obsolete version is installed in the structure of C:\Users\...\AppData\Local\Mozilla Firefox where «...» "refers to my specific user name (which is legitimate, I'm the only person using this desktop computer).

I started using Revo Uninstaller (licensed version) to force the uninstall of this executable specific v27.x, but after analysis that he presented purpose actions that would run the uninstaller integrated and identified that v36.0.1 would also be removed simultaneously. Is there a Protocol by which I can remove the old version and all of its entries in the registry without affecting the current version and its registry entries (and profile, etc.)?

Tags: Firefox

Similar Questions

  • Have a rocket w / 8 gb 8 GB; What is the best way to remove the mp3s in double...

    I looked through some 50 pages and did not find the answer.

    I have a 8 GB Fuze w / additional removable 8 GB.  By mistake I put a few same songs on both discs.  What is the best way to remove these and if I do not remove them, she also ruin added playlists?

    Thank you

    Connect it to your computer, set up 2 separate workstation boxes, one to an intern to exteranal and scroll down... delete the dupes of one of the disks and problem solved

    Edit: I forgot you questions about playlists of pesky things I barely use. Those that you might have to re-do.

  • What is the best way to completely uninstall optimizer registery of winzip

    What is the best way to completely uninstall optimizer registery of winzip? That seems doubtful, and has installed without my consent. Pls help

    Hello

    You can uninstall a program from your computer if you no longer use, or if you want to free up space on your hard drive. You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

    For more information, see Uninstall or change a program

    Alternatively, you can contact their support team for assistance.

    It will be useful.

  • What is the best way to remove a hum in the context of multiple clips

    I have about 40 short excerpts with the same buzz in the background. What is the best way to get rid of it? I know how to make a video, but I can do everything at the same time? When the workflow is the best time to do this? Should I use an adjustment layer?

    Thank you!

    I always do everything removing Hum as the first operation. As Bob says it depends on snoring, but if it's typical induced current then the DeHummer tool is the best to use. Once you have found the right settings you can save as a favorite and the use of batch processing to remove all clips at once.

  • I got my wife a new iphone 6 and I'm going to use his old iphone 6. What is the best way to remove his contacts/music/etc. and mine install on old phone?

    Wouldn't be better to do a full restore to old phone via itunes?  And then his 'old' connection phone to my macbook and install my info to the Cloud?  What is the best way to do it?

    Follow the procedures described in: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

    To get your content on the phone: restore your device from an iCloud or iTunes backup - Apple Support

  • What is the best way to remove variables?

    I need to remove several variables to repository and the initialization block that contains.

    They are not referenced in the company or the presentation layers.

    What is the proper way to remove them?

    Thanks in advance for any response.

    There is no set procedure for Oracle/Siebel.

    The RPD does not hurt if you follow or don't follow any procedure.

  • What is the best way to remove a virus on a Windows 7 computer?

    Hello, so I have a little problem here my pc has contracted a major virus that my my anti virus cannot process. The only way I know to do is to reset my pc to factory settings, my pc came with windows 7 home pre-installed when I bought it. Is there a way I can use the product key on the back of my laptop to reinstall windows 7 when I restore my computer. I would rather not to buy at the store

    Hello

    If you can not remove the malware then follow the good advice of André for resettlement.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

  • What is the best way to remove a drop of water in an image?

    I took a picture when it was raining and I had a few drops in my goal. the corresponding images have a slightly oval light color of the past and I was wondering what approach might be the best and fastest...

    Really appreciate any help!

    Juan

    I had just use the tool burn on those.

    Since they are little blue, you will want to do separately on individual color channels.  Place the tool burn shadows, and a small amount of exposure, say 10% and the airbrush mode.  Slowly, work the brush in compared to the size and toughness to match the spot size, sizing and try not to rush anything.  Once you get the place removed from all 3 color channels, you should find that it looks pretty good in RGB (color).  If you find you need more space, or go too far, use history and go back and try again.

    Is the razor wire along the section of wall on the side of the property next door?  If so, I wonder if it would be incorrect to remove it from the image...  The trash bags should probably go too...

    -Christmas

  • Is DataBlDel() the best way to remove channel lines?

    Hello

    I try to delete specific lines in a block of channels and find that DataBlDel() is extremely slow. Of course, my channels is fairly long (~ 36e6 lines), but I find that it takes hours to remove a handful of lines. Is there a better way to do it?

    The code I use is listed here:

    Option Explicit

    I have Sun

    I have = 1

    <=>

    < 0="">
    Call DataBlDel("[]/Time",i,1)
    Call DataBlDel ("[]" / Time Delta ", i, 1")
    Call DataBlDel ("[] / Force load Pin (PST_002_FCE)", i, 1 ")
    On the other
    i = i + 1
    End If

    Wend

    Everything is very appreciated, advice

    PorridgeMan.

    Hi PorridgeMan,

    This task can be done loads faster.  First, the DataBlDel() command is working on multiple channels and multiple lines at once, so you call it many more times to you.  If the time of<0 rows="" are="" contiguous,="" the="" ideal="" approach="" would="" be="" to="" use="" the="" find()="" function="" to="" get="" the="" first="" row="" where="" time="">= 0 and use exactly a call DataBlDel() to remove all lines not valid 3 channels.  If the time<0 rows="" are="" not="" contiguous,="" then="" i'd="" recommend="" using="" the="" calculator="" approach,="" like="">

    L1 = NOC ("specifying")
    L2 = ONC ("/ time Delta")
    L3 = ONC ("/ Force charge Pin (PST_002_FCE)" ")
    IF L1 0 > AND L2 > 0 AND L3 > 0 tHEN
    Call FormulaCalc ("Ch (L3): = Ch (L3) + NoValue * (Ch (L1)")<>
    Call FormulaCalc ("Ch (L2): = Ch (L2) + NoValue * (Ch (L1)")<>
    Call FormulaCalc ("Ch (L1): = Ch (L1) + NoValue * (Ch (L1)")<>
    Call ChnNoVHandle (L1, L2 & "," & L3, "Delete", "XY", 1, 0)
    END IF

    Brad Turpin

    Tiara Product Support Engineer
    National Instruments

  • What is the best way to remove copies of files, such as images duplicate?

    I can't afford expensive programs, what is the easiest and program I hope free to use, clear files copied to my hard drive.

    Hello

    Microsoft has no any tool to remove files or folders from the computer, you must manually select and then delete.

    If you want a tool, then I suggest you to use your favorite search engine and check the tool.

    Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.

    It will be useful.

  • What is the best way to remove a white background seamless photo with a photo of the white product in order to make the background transparent for the production of graphic art?

    engle catalog  July 31 201568295.jpgI'm making a picture of the product of a product of pale whitish color on a white background without sewing (quite complex detail).  I need to make the background transparent for the web and the production of catalogs, I've always used the pen tool to create a clipping path.  Is there an easier way?

    According to the image that you have to work with, you could try an initial with the Quick Selection tool and refine edges.  Save the new output layer with layer mask.

    http://photography.tutsplus.com/tutorials/quick-tip-using-refine-edge-for-improved-masking--photo-14682

    Nancy O.

  • What is the best way to remove the symbols generated dynamically from another symbol?

    in the onClick for 1 symbol handler, I have:

    var sandwhichQty1 = sym.createChildSymbol ("sandQty1", "Stage");

    another symbol inside the sandQty1 has the onClick method:

    this.deleteSymbol ();

    that works well, delete sandQty1. I would like to delete and others, another button, in which case users close this way.

    I noticed that the id and class are assigned dynamically to the symbol of the child, which makes it difficult for me.

    any ideas?

    Hi, Lloydie-

    What I would do in this situation is to save a reference to the object as a variable in the symbol on the creation, then reference the variable when you want to destroy.

    So:

    var foo = sym.createChildSymbol (blahblahblah);

    sym.setVariable ("bar", foo);

    In the other symbol (assuming the two symbol instances are at the same level with regard to step):

    var foo = sym.getParentSymbol ().getSymbol("mySymbol").getVariable ("bar");

    foo.deleteSymbol ();

    Hope that helps,

    -Elaine

  • What is the best way to remove the blue reflections due to white balances mixed?

    Hello

    I have this picture taken under tungsten light, but there are reflections of the light (the Sun) that appear naturally on blue-magenta.

    I thought that, maybe, mixture of yellow-green can help to eliminate them. In fact, I only need to decrease their saturation and become like the other whitish reflections...

    Any ideas?

    Thank you!CamposantoLaPiedad-1876.jpg

    Juan

    One way would be to use a hue/saturation adjustment layer and reflections targets the on blue-magenta

    who is present in the carpet near the wall outlet as well.

  • What is the best way to remove all FCPX?

    Hello

    I am a teacher with 10 workstations.  Since we are at the end of the year, I would like to delete all FCPX on the computers and get them optimized for the next school year.  Does anyone have any advice or recommendations on what do I do?

    Assume that you use media managed, you can simply delete all libraries and all backups in the movies folder. If this isn't the case, it's a little more complex.

  • Best way to remove the clipping

    What is the best way to remove the clipping?  I tried

    restoration/effects/clip restoration (process) and...

    In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

    Thank you.

    Steve C2 wrote:

    In some cases. It does not remove the distortion, even if the chart of the sound wave "seems good.  I just tried the presets.  Any suggestions?

    Not really--and this is not really surprising that this does not work in all cases. in fact, it is quite surprising that it works at all, in many ways. Obviously, the worst of the peaks of the break less information will be missing, and when the break comes to the point where the distortion is audible, then lot of data reconstruction is not just there for the software to make assumptions about - no cure so that it is possible.

    Only one pic is not too difficult to reconstruct - you have the slope of the wave of hand and on the other, and all you have to do is find where are the points of y-intercept of the two tracks, and who will be actually rebuild - probably quite precisely. But at the time wherever your clipped signal effectively contains two or more peaks, especially if they are part of a long harmonic, then reconstruction can actually do the distortion that you will inevitably get worse. This is because the software only attempts to reconstruct the waveform of the tracks on part and on the other of the clip, (information) as well as harmonic any expected have been there becomes altered, virtually useful - where increased distortion.

Maybe you are looking for

  • Facebook does not sit well with Safari.

    MacPro (early 2009) 2 x 2.26: OS10.11.5: 12 GB of RAM Safari Version 9.1.1 (11601.6.17) Hi all When you use Safari to access Facebook, by clicking on the links on the Facebook page to produce no response; Right-click on it and select "Open in a new t

  • a timestamp correlated

    Hello Forum, My previous post is left unanswered , and so I stumbled through on my own. My goal was to perform time correlated anticipated spectroscopy. I use a 6321 X series DAQ card, a Perkin Elmer SPCM and a pulsed laser. I'm exciting a sample wit

  • Why some AVI format doesn't work properly with IMAQ?

    I tried to do a job with handling the AVI files in labeled, but it seems that mine will not work. Whenever I try to load, I get the error: Error 1074396005 has occurred to IMAQ AVI2 close Possible reasons: IMAQ Vision: Session invalid AVI. What is st

  • DOWNLOAD STARTUP REPAIR ANYWHERE

    My computer froze and had to close button, but now is only going to start in safe mode. I tried many things but no repairs of work.startup is not installed and I do not have the instalation disk; is there anywhere I can download the file.

  • error message.file is not found for. C:\windows\system32\spool\drivers\w32x86\3\lxcgtime.dll

    I get this can appear at the start of pc. Do I have a major problem?, this means that the drivers are missing, if so, how to fix? The computer seems to work without any noticeable problems. Thank you