The BIOS boot freeze

Similar Questions

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Compaq Presario CQ57: Need to get into the BIOS boot options received the disabled system error 59025057

  Need to enter boot BIOS options have system error disabled 59025057 also want to disable the password of the bios for the future

  @thatmomgamer

  Please enter:

  46983099

  Kind regards.

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...

• Tecra S2: Question of characters with the BIOS boot password

  This is my laptop:
  Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
  Model PTS20E-18S032GR number
  purchase 30/01/2006
  link:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

  When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

  When I did find the password. What can I do?

  Hello

  The fact is that the BIOS password can be removed only by the service of Toshiba.
  There is no need of a special procedure that can be done only by the service man.
  There is no other way to make mobile accessible full

• Add the entry to the Bios boot

  I'm looking to restore the boot entry uefi but having problems to find in the bios

  https://www.Thomas-Krenn.com/en/wiki/Restoring_UEFI_boot_entry_via_motherboard_replacement_or_BIOS_u...

  No idea how to do this on a Thinkpad P50?

  The Bios Lenovo does not allow you to add a boot entry. This is necessary if you restore a hard drive using imaging software, without it, you are unable to start the system restore.

  Edit: included more details

  The imaging program that I use is dd on linux. The dd command not the installer boot uefi entries.

  I run currently 3 separate BONES on 3 discs (the joy of owning a P50). I managed to find a way to add entries of uefi boot in Windows. The program EasyUEFI (http://www.easyuefi.com/) works perfectly.

• Problem with the BIOS boot image

  Hi - I recently updated day/flashed the BIOS of my T60 (2623-KFU) through windows by using the Setup files in the support section. I noticed the image of the characteristic changing BIOS boot and creates the Logo.Mod file that I have included in my BIOS flash. However, flashing it, I noticed that the Intel Logo (top-right) and the Lenovo Logo (right & Vertical) still exists and overlapped my custom image.

  Is it possible to remove these logos so that I can have a clean design beautiful original appears at startup? I tried flashing back to nothing does not.

  ThinkWiki says that you have to work with them. I didn't find a way to remove them.

  http://www.ThinkWiki.org/wiki/How_to_change_the_BIOS_bootsplash_screen

• In the BIOS boot device options

  Hello

  I want to use my USB to be bootable since my laptop Winxdows XP.  When I go to the BIOS to change the settings,

  the Boot Options available are:

  Startup CD-ROM (ENABLE)

  Boot disk (ENABLE)

  (DISABLE) internal network card boot

  BOOT ORDER

  USB disk on key

  USB floppy drive

  CD-ROM ATAPI CD/DVD drive

  Portable hard drive

  USB hard drive

  Network card

  Please indicate which of these Boot Options should I 'ACTIVATE' and

  that the boot ORDER should I choose to be at the top: -.

  1. If I want to boot from my USB key USB

  2. If I want to boot my Portable external hard drive

  3. If I want to boot from my CD/DVD Rom

  4. If I want to boot from my laptop

  The "boot" of Word to say 'start' in language computer, right?

  So if I chose to boot from my USB key, my laptop cannot start to load Windows XP because it normal would be more until I go back to the BIOS to change the setting?

  Why cannot it not auto answer to the user's choice to start the Windows?

  BTW, what does "Starting the internal network card" means?

  Please notify.

  Thank you

  glemel

  To see if you can boot from a USB key, you must go into your BIOS and look at the boot order.  If you see "USB stick" in the list, then you can probably - but it should be placed in the order before the drive hard to make it work.

  If you want a boot disc/USB drive for repair purposes, I highly recommend the free Hirens Boot CD.  This CD comes with a bunch of diagnosis and repair integrated tools.  If you can't fix it with this CD, it cannot be fixed without having to reinstall Windows.  Of course, this is not Microsoft.

  Download Hirens: <> http://www.hirensbootcd.org/download/ >
  Don't be fooled by the fake download links.  The correct link is a file .zip downstairs in a light green rectangle with a drive icon.

  There are instructions to create a Bootable CD and bootable USB Thumbdrive:
  Hirens CD Burn: <> http://www.hirensbootcd.org/burning/ >
  Hirens USB Flashdrive Burn: <> http://www.hirensbootcd.org/usb-booting/ >

  HTH,
  JW

• find, "with the cd on the bios boot &#60; on apple PC with win xp.

  Password lost on cp family.  We do not find the boot from cd on the biops. It's a PC with win xp apple

  Hi haouatim,

  There is nothing indicating 'Boot from cd' in the bios. You will need to arrange the priority of disc to create your CD / DVD Drive as the first boot device.

  Leave the Windows XP cd in the drive and restart your computer. It will then display you the option «press any key to boot from CD...» ", and then you must press a key or the Enter key.

  Reference: http://www.ehow.com/how_6196502_set-bios-boot-cd-vista.html

  You will need to save your own installation of important data of the operating system that result formatting will destroy all your data from the partition of the said.

  I hope this helps.

• Hibernate mode overrides the settings of the BIOS boot

  I put my Home Premium 64 k of win7 Hibernate version and inserted a bootable CD in the drive. To restart, I expected the boot CD. But what happened is that the machine is out of hibernation in Windows - just what I wanted to happen.

  I thought that hibernation has written information in the system of Windows startup saying restore the system running from the hibernation file, that would happen after the start of the C: drive. The BIOS is set to give the priority of CD player on the hard drive and it works very well after a shut down Windows. So how the hell manages it to wake up from hibernation? And how can I stop it?

  I know not what you ask.
  Hibernate and wake-up process is part of the ACPI specification and uses the S4 power state.  I know that when the machine is re-fueled the BIOS performs the normal boot process, but exactly how he 'knows' is an interesting question.  I don't know if a flag is set in the CMOS when the S4 state is applied or it checks the hard disk of the existence of hiberfil.sys and the flags of the State has put out there.

  It could be explained here-
  ADVANCED CONFIGURATION AND POWER INTERFACE SPECIFICATION
  http://www.ACPI.info/spec.htm

• No video during the BIOS boot

  We have a HP Pavillion 380 t.  I want to change the boot order, etc., but there is no video is displayed at the start of the BIOS.   Boots for Win7 OK.  Y at - it a hotkey to toggle it works?

  Thank you

  2whlgeezer wrote: we have a HP Pavillion 380 t.  I want to change the boot order, etc., but there is no video is displayed at the start of the BIOS.   Boots for Win7 OK.  Y at - it a hotkey to toggle it works? Thank you

  Hello 2whlgeezer, I have this exactly the same model system and have no problem see the screen Logo of HP where it displays options to access the BIOS and other boot options. I can press the F-10 and enter the BIOS.

  Can advise you if you see something on the screen at all?

  You can try by pressing e key F-10 immediately when the system boots, even if you can't see anything on the screen and see if it will enter the BIOS and display a picture on the screen.

• Satellite C650D - how the BIOS boot CD?

  Hello

  I'm trying to make a disc bootable image to update the BIOS for the model Satellite C650D (PSC16A-02U011).

  Can someone point me in the right direction? I found the download area of the driver for this model, but the update to the BIOS it is only an exe file and my laptop has no operating system on it at the moment.

  If I try to load the system hard disk and then use the exe it gives me all sorts of problems so I m try to Flash the BIOS from a CD while the hard drive is out.

  Then after that I updated the BIOS I have reinstall everything.

  Thank you

  {quote} I m try to Flash the BIOS from a CD while the hard drive is out. {quote}

  I m wondering why you n t replace the HDD and install Win 7 first.
  Then you could update the BIOS (if necessary)

• Satellite M30: How disable the BIOS boot password?

  Hello

  Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

  Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.

  THX,

  Werner.

  PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.

  Hello

  I found a step by step explanation to clear a BIOS password:

  "Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

  Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

  Press the F1 key. This will start the device in the BIOS Setup mode.

  Using the arrow keys or tab, move to the password field and select REGISTERED.

  Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

  Hope this will help you.
  Good bye

• Beep of password for the BIOS boot

  Greetings.

  Currently, using Compaq Presario V3337TU, I just put the startup password in the BIOS. He invites password every time is (once short) loud beep. It is disturbing the people around me and then, in public places. Currently using the latest version of the BIOS: F.39. Anyway he cut?

  Kind regards

  Brandon Lee

  Hi @TICORP,

  Thank you for visiting the Forums HP's Support and welcome. I have studied your Compaq Presario V3337TU notebook and not wanting to no sound at the start of the BIOS. Unfortunately if you disable in BIOS your sound will work not on the laptop at all.

  Here is a document to restore the BIOS to the previous version.

  Hope this helps you.

  Thank you.