The BIOS utility 600th for linux (or boot back disk)?

Hello

I need to completely disable the IrDA and put ttyS0 Serial port (COM1). How?

Assuming I need to the BIOS Configuration utility, but I found no linux version. Or BACK-version that fits on a floppy 1.44 ".

ttyS0 was working well until I decided to update the kernel (bad idea!) A good point is that now I am able to monitor the status of the battery but ttyS0 dies which lead to situation that gammu smsd is not more work.

Any help would be more than welcome!

BR

Miha-

Problem solved. Booted from CD http:/miha.webhop.net/600E_BIOS_Configuration.iso

and then sequence of commands:

Disable imodem PS2

disable the ir PS2

disable the PS2 Sera

Sera PS2 address 1 (= ttyS0 COM1)

enable PS2 serums

And restart. Now, serial port works again. Detective Conan.

Tags: ThinkPad Notebooks

Similar Questions

  • LSI Logic SCSI Ultra320 RAID Firmware and the BIOS utility. Cannot make the diskettes.

    I downloaded the pack sp29637 for Firmware LSI Logic Ultra320 SCSI RAID and the BIOS utility to my Workstation xw 8200. I'm doing a disk from the downloaded file. I runs the file, but when it tells me to put a floppy disk in the A: drive and I confirm, the window closes and the diskette is not made. Looks like the copy in the file program is corrupted.
    Does anyone have this already developed package files so I can copy them to a floppy disk?
    The files are supposed to be the following:

    Hi Sasi,

    Yes you are right. Then, I realized that I could open these files using Winzip or Winrar. I thank very you much for responding to my post.

  • Brand new Aspire E11 (E3-111) brick by the BIOS utility official Acer - what now?

    Yesterday, I bought a new netbook for my girlfriend. I decided to make sure that the netbook is using the latest BIOS and latest drivers. So I downloaded the BIOS utility official support page (http://www.acer.cz/ac/en/US/content/drivers/5329;-;) Aspire 20E3-111%), extract BIOS_Acer_1.05_A_A.zip and launched BIOS_Acer_1.05_Windows\ZHJ_105.exe.

    The utility began to update the bios without asking (!), the system has been rebooted and I also saw a progressbar finishing 100%. Then I waited... nothing (battery was full and connected to the AC). Now, the netbook is dead. Power button does nothing.

    Is there something I can do before I go back?

    My broken netbook has been replaced by a new. You can be sure that I won't try updating the BIOS again ;-).

  • What's new in the update of the BIOS v2.00 for Satellite L505-144

    What's new in the update of the BIOS v2.00 for Satellite l505-144

    Thank you

    Hi mate

    As much as I know European Toshiba driver page does provide no details what has been changed in the BIOS.
    But I found some details on the Toshiba U.S. page.
    It seems that Fn + N + 1/2/3/4 function of debugging has been removed in 2.0 BIOS to avoid the abnormal behavior of the keyboard.

    Welcome them

  • update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

    I have a HP Pavilion - XP or version of the original software m7570n!

    Motherboard is HP/Compaq name: Leucite-UL8E

    http://support.HP.com/us-en/document/c00714544

    I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

    Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

    I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

    Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

    THANKS FOR ANY HELP IN ADVANCE!

    TIM

    NOW FOR THE FINAL SOLUTION:

    Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

    NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

    WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

    I googled the error message and found this site:

    http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

    I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

    SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

    TIM

  • Can't the bios utility.

    When I hit F10 or F1 I get only the possibility to test the memory or boot OS.

    MOD A6763W

    SvcPac2 Vista64

    Oldandgrumpy,

    Try a hard reset first, then try to access the BIOS menu

    1. remove all connections to the computer, including the power cable

    2. press and hold button power for 30 seconds

    3 reconnect on mouse, keyboard, monitor, and power only

    Turn on the computer and press the F10 immediately and repeatedly and see if that allows you to access the menu of the BIOS.

    Please answer as soon as possible.

    Thank you

  • Need to update the BIOS and drivers for Satellite Satellite Pro A10

    I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

    Please provide me with a link.

    Hello Debbie

    There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

  • What has changed in the Bios 1.50 for Satellite M70 (PSM71)

    Hello!
    If possible, I need some info on the new bios 1.50 for Satellite M70 (PSM71).
    What is the "change log"?

    Thank you very much!
    Ciao!

    Hello

    Toshiba does not have any s official information on the updates to the BIOS on European laptops.
    I found some info on the Toshiba site us but nothing about the designed BIOS for laptops European.

  • How you enter the BIOS M200? or how to boot from a network?

    I tried several key but only stop start and let me choose the boot device.
    And how do I boot option network?
    I need to restore my laptop but don't have a dvdrom drive...

    Hello

    To enter the BIOS settings please press ESC while that laptop starts.

  • Can I update the bios with software for windows vista?

    I have a HP Pavilion a1747c desktop computer and I need to update BIOS for virtualization technology. However the update the BIOS only supports Windows Vista, and I have Windows 7. Can I still updated it somehow?

    Yes, you may be able to extract the actual BIOS file of the installation package compressed and use a flash routine appropriate for flashing BIOS under another operating system, but you do so at your own risk. Any damage to your computer by using this process is at your own risk and you take responsibility for it.

    Please send Bravo

  • Yes I installed service pack 3 on the computer and now my computer does not have a cdrom in the bios or were for this matter__

    Yes, when my computer is its service Pack 3 update, my computer did evidence the cdrom in the bios or had other

    Device Manager... can be empty after you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/953791

    Device Manager may not show all devices... After you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/953979

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • Flash Player indicates that my version is obsolete, but I installed the latest version available for linux 64 bits.

    Sorry, your computer does not have the latest version of Flash Player installed.

    Please proceed to step 2. (Your last version11.2.202.577 Version21.0.0.182)

    Then, after following the instructions for step 2:

    NOTE: Adobe Flash Player 11.2 will be the last version of target Linux as a supported platform. Adobe will continue to provide backports of security Flash Player 11.2 for Linux.

    Version 11.2.202.577


    In my opinion, Flash Player does not make that my version is obsolete, when I have the latest being available for my platform.

    Hello

    I doubt that web sites use the widget 'Check now' to check the latest version of Flash Player.  Content providers more to define their content to use a specific version of Flash, especially if this version contains some features that they use in their game/application, not necessarily the most recent version.  One option is to use Google Chrome which incorporates Flash Player and use the latest major version (21).  PPAPI plugin is also supported on Ubuntu for Chrome browsers (Opera, for example).  If you use Ubuntu and are not opposed to the opera, it is another option.

    --

    Maria

  • Retrieve the names of files for Linux?

    Hello
    I installed ODI 11 g on windows. and load the multiple file. as you can see that this procedure (script) is used to get the name of the files. using technology "Operating System"
    cmd /c dir D:\test\*.*/b /a:-d > D:\\Filesname.txt. It works well on windows. Now, I want to load these files names that are on the Linux server.
    How will be the script for this
    as my files directory name is Test > > > > that contains files
    Filename.txt > > retrieves the names of the files in the test directory.
    In Linux.

    Thank you

    Concerning

    create a script file using above command and run the script file in odi.

    /Home/user_name/ScriptFile.sh

    It will work.

  • In Windows XP, the BACKUP utility in system tools requires a floppy disk should be created when you back up an entire volume. Why should a disk be used?

    As floppy drive are no longer included in laptops, the use of a USB storage device would make more sense now? Is this possible?

    Richard1952,

    Yes, you should be able to select an area on which you want to record on.

    Start > all programs > Accessories > system tools > backup: make sure to follow the installation instructions USB is plugged on when you start the backup utility.

    Good luck! Please rate me upward if you find my post helpful. Thank you!

  • Update the BIOS HPE - 337c: for a HPE - 337C

    Y at - it an upgrade for the HPe - 337C.  BIOS is now dated 19/05/2010 6.07.

    Hi there @carolinagator,

    I understand that you are looking for a BIOS available for your system. On the support page, there is no BIOS update available at HP.

Maybe you are looking for