The block 'add exception' is not active

Similar Questions

• What should I do if I need to disable the block add but I need it desperately for Youtube?

  I got a warning on my Tumblr, saying I have to disable an extension for all of the Add-ons on Xensemble to work properly. The problem is that I really want to disable the block add that it is so helpful and I really need. Is there another way to get xensemble to work, but with block adds still in use?

  You can create a filter to not enable Adblock Plus on tumblr, which should avoid this.

  You also need to update Firefox 37.0.1, the version you are using is very ancient.

• CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work t...

  CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work... they are all dependent on a previous installation. If I remove photoshop and try to use the CS4 install disc I have, it fails? Will I need to re - install Photoshop 5.5 and each single update since then go to CS4?

  You need not install older versions in order to get the last update enabled.  During the CS4 activation process, you can specify the eligible previous version (choose the oldest among a list, then enter its serial number).  Choose any one you had just before CS4.

• Craigslist 'Reply' and the buttons 'Add images' does not

  Until a few weeks ago, I used Firefox with no problem when browsing and posting Craigslist ads. Recently, the 'Reply' button in the messages does not at all. Nothing happens when I click it. When I write ads, the button 'Add images' does not save when I click it. I had to go back using Internet Explorer when using Craigslist. Help, please! (If it helps, I had to post this question in Internet Explorer, as the button "Question" on the page does not work in Firefox).

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Hi, I don't know why, why the Edit/Perspective option is not active. I cnnot use it.

  Hi, I don't know why, why the Edit/Perspective option is not active. I can't use it. This is a simple job: on the wall in perspectiwe I want to put the logo (point of view of Pentecost). I use grit in perspective and then want to use the option change/Perspective. The comends are grey (not active). I don't know why.

  I can't help you with questions of the Illustrator.  Maybe post in the Illustrator forum instead of the generic Cloud creative forum:

  Illustrator

• I just started my creative cloud subscription and in artificial intelligence, I try to convert the text to outlines text, but only in the type of command is not active! can someone tell me why? and what should I do to activate it? I use in windows 8

  I just started my creative cloud subscription and in artificial intelligence, I try to convert the text to outlines text, but only in the type of command is not active! can someone tell me why? and what should I do to activate it? I use in windows 8

  Abdel,

  What font you vectorize?

  Or is happening with all your fonts?

• How to correct this "this link is not active"?, I did elimate the link and press it again, but seems the same: "this link is not active" when I tried to send a link to a file or a folder... Thanks for help...

  How to correct this "this link is not active"?, I did elimate the link and press it again, but seems the same: "this link is not active" when I tried to send a link to a file or a folder... Thanks for help...

  Links for synchronization of files that can help

  -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html

  -sync and send a link http://forums.adobe.com/thread/1427516?tstart=0

  -http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html

  -Size limits https://forums.adobe.com/thread/1488242

• The Web service exception was not catch!

  Hi experts,

  
  I use Jdev 11.1.1.5 and I am faced with an extrange problem (hope that's not a bug)

  I call a method AMImpl to a bean to support:

  String result = (String) ADFUtils.getBindingContainer().getOperationBinding("am_method").execute();    
  logger.info ("Result of webservice = "+result);
  

  The AM code calls a Web service:

  try {
     port.webServiceMethod(param1);
     logger.info("Succesfully completed");
  } catch (Exception e) {
     logger.severe(e.toString());
  }
  

  If param1 is null, web service returns an exception, I'd like to catch:

  <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
     <S:Body>
        <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
           <faultcode>S:Server</faultcode>
           <faultstring>Missing parameter</faultstring>
           <detail>
              <ns2:exception class="java.lang.IllegalArgumentException" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                 <message>Missing parameter</message>
                 <ns2:stackTrace>
                    <ns2:frame class="es.senado.regel.RegElectronicoWS" file="RegElectronicoWS.java" line="543" method="actualizarEstado"/>
                    <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="native" method="invoke0"/>
                    <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="39" method="invoke"/>
                    <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                    <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                    <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="92" method="invoke"/>
  

  My problem is that exception had not been made and or save messages ("Successfully completed" or exception.ToString() ()) is printed.

  It seems that the execution is canceled in the AM and only the first record in the managed bean is printed ("webservice result = null")

  Thanks a lot for your help.
  Jose.

  The finally clause lights OK

  Then it is an internal problem with the implementation of jax - ws (probably ws response cannot be parsed for a reason, for example bad schema xsd etc...).

  You can try to catch Throwable instead of Exception.

  Dario

• Firefox 3.6.3 does not have the option 'Add exception' a self-signed certificate

  Hello. Use the website of the company, I have moved to a new server. The new server needed some modifications apparently, and now I get the message CompanyXYZ .net: 987 uses an invalid security certificate. The certificate is not reliable because it is self-signed. The certificate is valid for the moment, on 1 of my 3 computers, I received the I understand the risks and an option to add an Exception. However, on 2 other computers, I simply receive the popup described previously and no option to move forward. Any suggestion would be appreciated. Thank you for your genius.

  URL of affected sites

  private enterprise server

  If you can not add an exception, but get a pop-up with the error message, you can go the pref browser.xul.error_pages.enabled on the topic: config page and make sure that the value is set to true (the default).

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• The "Noscript" add-on is not automatically reload the pages after the granting of a temporary permit.

  It's as simple as that. I tried to seek support of noscript, without success.

  Personally, I have disable this setting because I did change the permissions several times, but NoScript used to recharge automatically.

  Have check you the settings to make sure that is still selected? See attached (where I disabled it) screenshot.

  There is a forum for support on NoScript.netand an active thread on another user with this problem: https://forums.informaction.com/viewtopic.php?f=8 & t = 21330. In this case, the extension of blur disabling solved the problem.

• After you load a DNG file in the editor, the menus of layers are not active. IM asked to reduce the color depth of 16 to 8 bits/channel. Why? I would like to make a levels adjustment layer. If I directly in the initial layer didn't pronblem

  Does anyone have an explanation?

  Dudocar wrote:

  Does anyone have an explanation?

  Elements does not manage the layers in 16-bit mode.

• The "get Messages" button is not active or does not

  I installed Thunderbird two days ago and use a global mailbox. The button "Get the message" gets it no emails. However, if I press each mailadress individually, I receive emails correctly. Hope someone knows how to solve this problem.

  "Get Messages" will work for the selected e-mail account.
  In the menu "Get the Message" drop-down selection "Get all new Messages" will work on all accounts e-mail automatically.

  For a Global Inbox type of account:
  If you check 'Include this server when getting new messages', you need to download mail when you click on the button "Get Messages"... see info below on the control that this field is selected.

  In tools > account settings > server for the e-mail account settings
  or
  menu icon > Options > account settings > server for the e-mail account settings

  Click on the button "Advanced".
  You should have this selected:
  Inbox for the account of different ' global Inbox (local files)
  Select 'Include this server when getting new messages'
  Click OK
  Click OK to save the changes to account settings.

• Message "this connection is not approved. After choosing 'I understand' Add 'except' and 'confirm dry', need me a modified version of the site.

  Almost all sites Web generates a message "this connection is not approved. After choosing "I understand the risks", "Add exception" and "Confirm Security Exception", it takes me to a lighter version of the site that looks nothing like the real site. Also, I get this message on the sites of Mozilla trying to solve the problem. Under the technical details, it reads, "the certificate is not reliable because no sender string has been provided. (Error code: sec_error_unknown_issuer) "the articles I've read on this subject do not seem to help.

  This happened after I restored it firefox to default settings. I have a copy of my personnel file on my desktop. I tried to put it back in, but nothing changes. I've deleted and reinstalled firefox a few times.

  Any idea would be appreciated. Thank you for your community!

  Unfortunately, certificates of do_not_trust could be a sign of unwanted software on your pc that is to intercept the secure network traffic. go to the system control panel and uninstall programs such as BrowserSafeguard, BrowserSafe, backup or other software that seems suspicious and did not get intentionally installed by you.
  
  _{Reference: https://support.mozilla.org/en-US/questions/982532#answer-520145}

  afterwards, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• Problem with certificate and the exception is not available

  So, here is my problem I am trying to connect to a secure server. When I do this, I get to a page telling me the browser appears not that the server is secure and that the certificate is old.

  When I click on the button "Add an exception" a small window opens saying the certificate is new safe and I can't add an exception.

  The exeption box is grey so I can't click in and the button 'Add exception' is olso gray so I can't click on it. I click on the button "Cancel" and return to the page telling me the server is not sure.

  How can I go about solving this problem?

  Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  Find out why the site is not approved, then click on "Technical Details to expand this section.
  If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

  You can see more details like the intermediate certificates that are used in the details pane.

  If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

  Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.

• Blocker 'exceptions' does not work

  I've identified a site for which we should be able to jump - rises. (Homepage of the Multnomah County Library and the library catalogue page.) Details of items on a page of catalog are provided in windows Firefox v. 9.0.1 treats like pop-ups. (Version 3.6.25 does not block these "pop-up windows" even if there is no listed anomalies. The yellow warning bar appears for a split second and then I returned to the page from where I started.

  Disable blocker completely solves this problem, but is not a desirable arrangement.

  The following article contains information on the blocker popup ads and some troubleshooting steps. Please read this article, I believe that this will help you get this problem is resolved.

  • Parameters of the blocker advertising, exceptions and troubleshooting