the Bluetooth network connection network adapter is not connected

Similar Questions

• Wireless network adapter is not installed and configured

  I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.

  The adapter is inside the laptop.  You don't need to do something with it to install it.  Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install".  You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections.  This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).

  Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

  Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  As I am unsure of your Setup, I've included several items that can help depending on how you are setup.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

  Hello

  Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

  And if I "try access the Cloud Console ASM instances will fail with this error:"

  IO error: the network adapter could not establish the connection

  The connection descriptor has been

  (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

  (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

  My env is:

  Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

  Someone knows how to solve this problem?

  Thank you very much!

  Arturo

  (1) what is the user id you are using OEM fior?

  The user id should have Sysdba and should not be in the role SYSASM.

  (2) in order to check your port

  In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

  Summary of endpoints listening...

  (Check that the PORT and IP information is correct)

  Instance '+ ASM1' READY State, has 1 operation for this service...

  (3) in addition, connect to asm and check the connection

  Show u local_listener and entered into OEM parameter details are correct.

  (4) OEM, I think you add Cluster_ASM.

  Oracle_home_path--> you're grid House

  username--> with sysdbarole

  --> Sysdba role

  Cluster_name--> $GRID_HOME/bin/cemutlo - n

  Service name--> + ASM

  ADD

  NAME: INSTANCENAME

  -Home: HOST1

  listener_HOST-->< show="" parameter="" local_listener=""> exit

  PORT-->

  SID- + ASM1

  Concerning

  Krishnan

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Network adapter could not establish the connection

  Hello users,.
  
  I am facing a problem with my pool of connections configured in weblogic 9.2.3.0.
  
  The error is «network adapter could not establish the connection»
  
  Let me know why this error...
  
  -Milind

  Hey, Milind,

  better make you a telnet with your host name of the database, and the listening port.
  Maybe db url is wrong or database is down.

  -Kiss

• I had a the network adapter could not establish the connection...

  Hi guys,.
  I just downloaded and installed oracle 10g express in my installation of win 7.
  
  I have already created 2 tables and a single user and everything seems to be ok.
  
  but... There is a but! I tried to connect (using the ojdbc14 driver) NetBeans and I got an error "network adapter could not establish the connection.
  
  the connection string is:
  
  JDBC:Oracle:thin:@PCs:1251:XE
  
  (pcs is the name of my pc).
  
  This problem can be?
  
  Thanks much ;)

  Yep, that's what I told you, I tried with "xe" instead of "XE", but I still get the same error...

  What is the second mistake is the line you posted?

  Carefully COMPARE your line to mine

• Test failed: the network adapter could not establish the connection

  Hi friends,
  I am trying to connect my database of Jdeveloper 11 g (ADF) it will be by mistake
  Test failed: the network adapter could not establish the connection
  could u please tell me all the solutions
  Thank you and best regards
  Jocelyne.

  Usual causes are:

  (a) you have a kind of firewall between you and the DB that prevents the connection
  (b) you use the wrong host/port/sid for your database

  John

• Problem SQLDEVELOPER the network adapter could not establish the connection

  Hello I have a strange problem with SQL Developer (2.1.63) under Linux (Debian-testing-squeez/sid) version of the version: java java "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  Java hotspot Server VM (build 14, 2 - b01, mixed mode)
  
  Java is a debian .deb (sun-java6-jre, sun-java6-jdk).
  Whenever I try to connect to a database running on the remote server, I got error the network adapter could not establish the connection.
  (connection to base and also tnsnames connection)
  Sqlplus on the same machine works very well with the same connection settings, I also try the same SQLDEVELOPER version in the windows box and I had no problem with the connection.
  
  what I tried:
  1. in the course of running tcpdump eth0 dst db01x-i on the client and I don't got no network traffic going out of the box
  2.i have also tried tcpdump - neither eth0 host 192.168.3.9 and port 1521 on the server database to be sure, but also no traffic
  3. put the database server in/etc/hosts nothing change
  4. change the level of logging of the SQLDEVELOPER, but no significant errors
  5 different versions of the jdbc (ojdbc5.jar, ojdbc6.jar) connector
  
  I'd appreciate any help in this topic.
  BR and thx Thomas

  This problem is probably with java networks interacting with a new parameter to the default kernel in Debian. Among the bugs identified on this is here - [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560056]
  Two things to try, from various bug reports, are
  (1) "echo 0 >/proc/sys/net/ipv6/bindv6only ' and make this change permanent if it works
  (2) edit {sqldeveloper home}/sqldeveloper/bin/sqldeveloper.conf and add the line}
  "AddVMOption - Djava .net .preferIPv4Stack = true '.

  Jean Paul

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Satellite M30-S309: cannot change on the local network adapter device

  Hello

  My name is Sebastian and I have a Satellite M30-S309 I can't configure IT the Connection WiFi.
  The drivers its OK (and reinstall) the LAN, but the WiFi RADIO network ok is OFF, have any opportunity to step ON this Board?

  I reinstall the KEYBOARD shortcut, but I think that the app or utility for the Fn + F8 key and the LED does not.

  Any can help me?
  Thanks in advance,

  S.

  You said the LAN is ok, but are you sure that the wireless network adapter has been installed on this laptop. Please check in the area to network adapters Device Manager.
  If the wireless network adapter has been installed, you should see the wireless network card in this area. As much as I k now the Wlan switch on the front of the laptop works only if the wireless network adapter has been placed.

• Pavilion network adapter are not not in Device Manager

  My Pavilion P6330f lost the internal network adapter (no internet connection, adapter are not not in Device Manager).  Is it possible to re-restore/refresh it?  I tried to do a scan to refresh hardware, but it doesn't show any internal network adapter.

  I was able to get back on the network by installing a wireless network adapter via the disk support provided with the wireless USB device and using Device Manager.

  It seems that the internal NETWORK adapter has gone (fried) and I need to install a new NETWORK adapter in one of the expansion slots.  Other options?

  Is this a common problem?

  D.

  No, it is not common, unless your home has experienced a surge\dropout of power or a bolt of lightning. What you are experiencing, this is usually the result of thet.

  Since your office worked five years ago, he certainly provided you a reliable service. You might consider looking for a PC replacement in 2015. SCP last usually about five years before replacement is required.

  Wireless, it's that a good option as no extra wire is a good thing.

• the local network adapter is disabled after reboot

  my internet connection status displays a caution symbol every time at startup and I can't access the internet until I have turn off the connection and then use troubleshooting which is good, but it doesn't tell me how to solve this problem permanently how it stop be disabled whenever I restart my pc?

  Hello
   
  1. don't you make changes before the show?
   
  We recommend that you follow these steps and check the result.
  Step 1: Disable network card power management settings.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand network adapters.
  3. double-click on the element sub under network adapters.
  4. click on the power management tab.
  5. clear all the options on the power management tab.
  6 apply the settings, and then restart the computer to check the difference.

  NOTE: Make sure that you have installed the latest network adapter driver.
   
  Visit this link for more information on "Troubleshooting network adapter problems":
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.