the box will not allow OK to be selected to activate it.  What should I do?

Similar Questions

• In an attempt tp install I-tunes, I said "the administrator will not allow him" - what can I do?

  I try to install I-Tunes, but my Vista system does not end.  At the end of installation, I get a message indicating that the administrator will not allow the program to add.  I have had no problem in the installation of I-Tunes on my other PC with a system 7.

  Hello

  (1) did you of recent changes to the system before the show?

  (2) are you connected to the system as an administrator?

  (3) what is the exact error message?

  Method 1:

  Follow the links below to solve problems and then try to install iTunes and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: Uninstall and reinstall iTunes.

  Follow the article mentioned below to uninstall and reinstall iTunes in high mode and check if this solves the problem.

  Uninstall and reinstall iTunes.

  http://support.Apple.com/kb/HT1923

  Also visit the below mentioned link.

  http://support.Apple.com/kb/ht1926

  http://support.Apple.com/kb/TS1331

  It will be useful.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• The printer will not allow the default printer

  Adobe will not print file, said printer must be installed
  .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

  Hi Jerry93306,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to print using applications such as WordPad or Notepad Windows?

  4. what Microsoft fixit tool you have installed on the computer?

  See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

  Error "you must install a printer.

  http://kb2.Adobe.com/CPS/409/kb409119.html

• I'm trying to update Java 8U45 in Firefox 39.0 for windows 8.1. The udpdate did not finish. I get an error 1603. What should I do?

  I have Firefox 39.0. The next generation Java plug-in 11.45.2 for Mozilla browsers shows that it is vulnerable. When I try to update my plugin on Firefox for the Java 8 51 version update, it downloads and try to install it, but will not complete the installation. I get the error message 1603. I try to use the online version of 32-bit.

  Try to uninstall Java and download and install Java 8u51 full offline Setup.

  You can find the last 32 bit Java versions on the Oracle's Web site.

  See the Platform Java > Java SE 8u51 (download of JRE; 32-bit for Windows)

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

• Moving from one box to check if the needle will not allow resizing when not not using arrows

  Moving a box which was resized if small pointer will only resize diagonally or vertically. It is impossible to use the arrow keys. Is it possible to retrieve and move an object by clicking on it and possibly pressing another button or something similar?  Thank you

  Zoom a lot and you will be able to enter the central part of the field and

  Move it.

  One game, June 25, 2015 at 04:46, tonyp15249544 [email protected]>

• The serial number on the box does not allow me to install

  The product on my box code is [deleted by Moderator].  When I put it in, it needs some numbers more so I don't know how or what to fill out in order to install the software.  I bought a student edition.

  Is not the serial number which can be used to install the software, you must retrieve the serial number using this product code (I removed) and to provide your proof of eligilbilty.

  For details, see the link:- http://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html

• I installed a new router. Now, one of the PC will not allow the rest of the pc s are there to connect. He is able to connect to each computer on the network. I can't find the question, any help?

  I have checked the computer name, sharing, turned off the firewall.  Still can't find the question.

  I've corrected in fact accidentally the problem today.  I uninstalled a Malware program and tada!, the other pc on the network were immediately able to access the XP pc.  The 'good' pc was always able to access internet, router, network between them.  The only problem we had was the 'bad' pc was able to connect at all, but the 'good' pc were unable to connect to the computer of 'bad '.

• We have added images to the Windows Photo Gallery and they will not come with other photos in our screensaver. What should we do?

  We put family photos in Windows Photo Gallery and then transfer them to a disc for recording.  We leave some in the Windows Photo Gallery and then click on the photos in the section of the control panel of the computer screen saver.  Old photos still come on t he screen saver, but the new ones that do not.  In addition, any image that we place it anywhere on the computer in a file or something else happens now in the photo gallery, and they did not have it before.  We need to stop that as well.

  We want to use all the photos in the photo gallery for the screen savers.

  We would like to stop pictures in other parts of the computer to be placed automatically in the photo gallery.  We want only to directly uploaded photos.

  Hello

  Try to make the clean boot and see if it makes any difference.

  To the clean boot you start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  For more information you can check the link below:

  http://support.Microsoft.com/kb/929135

  Let us know if it helps.

• I upgraded my ram 256 k xp in a crack of 1 gig in the same niche but the computer does not load. BIOS indicates still 256 k. What should I do?

  By the bios indicates ram 256 k in the slot one.  I bought a 1 GB card (correct map I know) and plugged into the connector 1.  When I turn on the computer it load windows and when I hit f1 the bios screen still displays 256 k in slot 1 and I can't figure out how to change that and get running.

  You can be sure, buy why don't we tell the brand and model of your computer (or your motherboard) and the brand and model of RAM you bought?

  Probable causes:

  1. bad RAM
  2. incorrectly installed RAM
  3 damaged RAM or motherboard installation
  4. defective RAM

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ADM 32 GB will not allow a unique SSID and password to be put in place

  Sir / Madam,.

  I got a new 32 GB ADM.  I have updated to Firmware 3.04.  I was able to reset the Admin password without problem.  However, the unit will not allow an SSID / unique password to create its own network.  I typed the info in the settings/edit page the Wi - Fi connection settings, with selected WPA security.  It will allow me to type the information in the data fields, and select done.  But then brings the following error message.

  "Error: failure Action was not successful."  Please try again later. »

  I also tried only to set a password, with WPA, using the name SSID default ('6B 23 SanDisk media").  It works no more.  I tried this in a few days.  The unit is fully charged.  He has no problem to connect with my home Wi - Fi network.

  In addition, on the page of my iPad device settings/Wi-Fi, 6 B 23 of SanDisk media is visible and connects without a problem.  But it says "Safety recommendation" under this network name.  I guess that's because there is no password set.

  I need for this unit to be sure until I'm able to use in public.  Any suggestions?

  Thank you

  Lee

  drlucky... OK, I called SanDisk and they understood the problem with me on the phone.  Wireless Media Drive passwords do NOT accept special characters or spaces.  Numbers and upper & lower case only.  Even for the SSID, except spaces are Ok for the SSID.  Hope this helps someone else who can read it.

• By mistake, I downloaded a program called driver of dog. But now the program does not allow me the 'uninstall '. Help! Thank you

  Recently downloaded a program called 'dog driver.  It was a mistake.  But when I went into Control Panel to use the feature to "Uninstall" to remove the program... the program will not allow the uninstall feature to remove it.  Any suggestions?  Thank you

  If the Control Panel does not remove the software, you can use an uninstall program:

  Revo Uninstaller - if she is not fully removed - follow the link and download the free version:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?

• Will not allow the transfer of files without authorization. How do I get permission?

  2 laptops to home network.   Windows 7.    1 x 64-bit, 1 x 32-bit.

  I have set up accounts on both computers at home as an administrator.
  I just want to transfer files / photos between them.

  My account on both (admin) will not allow the transfer of files without authorization.

  How can I get permission? I have set up on the two passwords I tried to use, but not joy.
  I missed something obvious?  I thought that I could just drag and drop!
  HELP please.

  Ownership of a file or a folder,

  Right click on the file/folder, select properties and then click the Security tab.

  Click Advanced, and then click the owner tab.

  Click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  See also why I can't delete a file or folder?

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder