The BT communication between NXT
After a BT connection between NXT, I run a simple vi on the NXT master to write a message to the NXT slave. At the same time a reading vi runs on the NXT slave simply to read and display the message. Nothing seems to happen. I use the VI in Addons > NXTToolkit > NXT library > BT Messages. No idea what I'm missing?
Here are two screws master/Client BT simple, I used to start with communication BT on the NXT using LabVIEW.
If the display of your NXTs indicate the sign "Bluetooth connected", you can use the master NXT (push button on Port 1 and press ENTER) to control the speed of both engines on the NXT Client (engine on Port B and C).
The two NXTs also display the BT Message on their screen.
Tags: NI Products
Similar Questions
-
No communication between the Bluetooth SD - BT2 and PocketPC SD card
I use an SD - BT2 (PA3271U) card in a Microsoft Pocket PC (also referred to as 'Microsoft PocketPC 2003') 4.20.00. I use the latest driver Toshiba 5.01 C and the card is recognized by the Pocket PC (Medion MD 95450 / MDPPC 150). I can connect to my mobile phone and GPRS connection is accumulation with no problems.
But later at this point in time, the connection is established but dead... no connection to anyone. It seems that the communication between the Pocket PC and the card SD - BT2 is broken on the software side.
Anyone have an idea (or a working driver) for this problem?
Thanks in advance
Karl
Hello
Have you tried to reinstall the drivers or software for SD - BT2?
In my opinion, you should check this option.
Also, I found a brand new version for PDA Bluetooth Stack (Bluetooth software and drivers).
Check out this site.
http://APS.toshiba-tro.de/Bluetooth/pages/download.php.Good bye
-
Best method of communication between the Application LV
Hello together,
I'm looking for the best way of communication between two Applications LabVIEW. As VI is clear, I can use a queue or a global variable and so on.
But what is the best, when I compile the screw later for DLLs or Applications. So far, we always use the TCP/IP Protocol, but I think that there must be a better way instead.
So if someone has an idea - he is welcome.
Thanks in advance
Markus
TRAXX wrote:
What I don't like with TCP/IP you still need a second thread (looped) who manages the TCP/IP communication. I thought that there must be an easier way.
I also thought that shared variables are always limited to a single application. Thanks for the ideas...
This second loop is a loop that YOU control. If you go with shared variables you are a slave to what they can or cannot do. In addition, they work over TCP/IP is not out of the picture.
Its your call.
Ben
-
I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.
You have a hardware failure of the printer. Contact the manufacturer for support.
-
communication between the printer and the computer stops
Original title: printer problem
Without rhyme or reason communication between our computer and the printer just stops (often!) Why? and how to fix it?
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
Need help configuration IOS IPsec to enable communication between the VPN client
Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".
The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.
Thanks in advance...
Hello
Try this: -.
local pool IP 192.168.1.1 ippool 192.168.1.5
access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">
access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">
access-list 1 permit 10.10.10.0 0.0.0.255
< lan="" behind="" the="">
ISAKMP crypto client configuration group vpnclient
key cisco123
ACL 1< binding="" the="" acl="">
!
--------Done-------------
If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had
Assuming that the NAT of your router is
overload of IP nat inside source list 111 interface FastEthernet1/0
!
! - The access list is used to specify which traffic
! - must be translated to the outside Internet.
access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255
Above two statements are exempt from nat traffic.
access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">,>
I would like to know if it worked for you.
Concerning
M
-
Encrypted L3 Communications between the TOWER and WLC?
Hi all
I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;
- I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
- The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
- EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?-->
Strange but true - pointers will be greatly appreciated... Phil.C
With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES. The user traffic is not encrypted. If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.
For what is running the traffic through a VPN, it should work. The issue I see with this is with the MTU in general. The controller will drop all packets with a payload of less than 32bytes data. According to the MTU over the VPN I've seen packets getting fragmented and it is a question. If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.
- I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
-
No communication between the primary and standby
Hello
I have configured the DG,
primary-> testprod
standby mode-> testprod_s
I started, standby machine instance watch with testprod and its place...
but there is no communication between the primary and standby...
How can I ask/check communication?Heartbeat PING [ARC3]: Unable to connect to the day before "testprod_s". Error is 12514
eve of post form
status of $lsnrctl
$lsnrctl servicesWhen oracle not registered with listener service, this kind of errors occurred.
The value of register LOCAL_LISTENER & manually as below in sleep mode and postSQL > alter the registry system;
-
Disable communication between the host and the virtual machine
I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.
is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.
Thank you.
The GUI Server2 is not to choose the other unused vmnets. Then edit your file VMX use a different vmnet of 0, 1 or 8. (which are bridged, host-only and NAT)
Thus, for example, if your VMX has a line that says:
Ethernet0.VNET = "VMNet0.
change to:
Ethernet0.VNET = "VMNet2.
(This assumes that you have not used the network Editor to fill the vmnet2 either).
-
Communication between TNS_Listener and the listener of the Apex
Hi all
I how communication between TNS Listener, receiver of the Apex and Apex? For some reason, I got the following error of Apex listener:
I truncated messages Java object.Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource . . . Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
This has happened when I tried to connect to the Apex. So I can fix it by going to:
then everything worked fine.http://localhost:8080/apex/listenerConfigure
My listener.ora file:
My tnsnames.ora fileLISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521)) ) ) ADR_BASE_LISTENER = /usr/local/oracle ADR_BASE_ORACLE_LISTENER = /usr/local/oracle
When inara is the name of the instance and the firefly is the host name.INARA = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = inara.snowdrop.com) ) )
Is that the order of start if first the TNS Listener or listener Apex matter first?
Best regards
Val
Published by: Valerie good-natured August 1, 2011 05:47Hi Val,
My tnsnames.ora is configured for an existing server and there is no client configurations like sqlplus, sql or earpiece of the apex developer. However until now the server can connect to customers without problem (I just discover that unreproducible error on 'impossible to find the SID' sometimes occurs at the beginning of the Summit, the kick-off and can be solved by waiting for a while to connect to reconnect), so again I must modify the .ora?
No, if your database listener is configured properly (i.e., he listens to the SID that you try to connect to the network interface/hostname/ip address /... she must use), there is no need to make any other configuration, especially not on another machine.
-Udo
-
Communication between HP eprint and Google Cloud Print
Hello
communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
Documents to print when I print vio Chrome browser or Cloud Print dashboard - but the State in the clouds print remains "submitted". It seems that somehow the HP eprint status doen't get referred to cloud print. In HP eprintcenter paper says "printed".
Well, I wonder who will take care of this problem... (Hope this does not lead to fingerpointing only...)
Thanks for your support!
Best,
George
Started more work, a few weeks ago. All is well now. Don't know who that sets well.
-
The USRP CSD requires the LabVIEW Communications?
I recently installed LabVIEW 2013 on my machine, as well as a whole bunch of toolboxes:
LabVIEW English 2013
VI Package Manager
Module LabVIEW Control Design and Simulation 2013
2013 LabVIEW Datalogging and Supervisory Control Module
2013 LabVIEW MathScript RT Module
NI LabVIEW 2013 LEGO (R) MINDSTORMS (R) NXT Module (in English)
Module OR Vision Development 2013
Module LabVIEW FPGA of 2013 (English)
Xilinx toolchain 14.4
Module time real LabVIEW 2013 (English)
2013 LabVIEW Touch Panel module
2013 LabVIEW Robotics module
Software OR SignalExpress 2013
LabVIEW Sound and Vibration Measurement Suite 2013
Module LabVIEW Statechart of the 2013
LabVIEW 2013 for myRIO Module
Toolkit OR run real time Trace 2013
2013 LabVIEW System Identification Toolkit
LabVIEW Toolkit 2013 Digital Filter Design
4.3.4 for LabVIEW Modulation Toolkit
2013 LabVIEW VI Analyzer Toolkit
2013 LabVIEW Database Connectivity Toolkit
2013 LabVIEW Report Generation Toolkit for Microsoft Office
LabVIEW Spectral Measurements Toolkit 2.6.4
2013 LabVIEW Advanced signal processing Toolkit
LabVIEW 2013 PID and Fuzzy Logic Toolkit
Kit filter LabVIEW Adaptive, 2013
Toolkit LabVIEW DataFinder of the 2013
2013 LabVIEW Desktop Execution Trace Toolkit
LabVIEW 2013 Multicore analysis and matrices hollow Toolkit
LabVIEW 2013 power electric Suite
Toolkit LabVIEW 2013 GPU analysis
Biomedical Toolkit LabVIEW 2013
Module LabVIEW 2013 OR SoftMotion
NEITHER Motion Assistant 2013
NEITHER Vision Builder for Automated Inspection 2012 SP1
OR DIAdem Professional 2012 SP1 (English)
LabWindows/CVI 2013 development system
Module time real LabWindows/CVI 2013
LabWindows/CVI Spectral Measurements Toolkit 2.6.4
Spectral measures of LabWindows/CVI DURATION 2.6.4
LabWindows/CVI SQL Toolkit 2.2
Toolkit for processing Signal of LabWindows/CVI 7.0.2
LabWindows/CVI PID Control Toolkit 2.1
Execution of LabWindows/CVI Profiler 1.0
Measurement Studio Enterprise Edition for Visual Studio 2012 2013
General safety NI Patch 2nd quarter of 2013
NEITHER TestStand 2013
NEITHER ELVISmx 4.5
NOR-DAQmx 9.7.5
Xilinx 10.1 Compilation tools (requires the build tools additional Xilinx DVD)
Device drivers or - February 2013I tried to follow this tutorial with the USRP 2932, coming soon, but I found out later that I have seem to have none of the LabVIEW Communications. No not those who prevent me from using the USRP radio? If not, then is there any restrictions on what I can do with the radio without communication?
Hi BreadLB,
The link to the tutorial you posted is based on LabVIEW Communications System Design Suite, a new software environment designed to accelerate the prototyping of the algorithm and stable air. It is a completely separate and independent of LabVIEW environment. See my post here for more details. You can also download a free 30 day trial copy here. Your hardware is supported with LabVIEW and LabVIEW Communications.
The 2932 NOR is a network based USRP, and there a small on-board FPGA. For this reason, the FPGA on that specific product is not a target of LabVIEW FPGA. The NI 294 x / 5 x family has a large Kintex 7 FPGA and can be programmed using LabVIEW FPGA and LabVIEW Communications, as in the tutorial you posted. The 2932 OR can be used with your host PC and LabVIEW for a variety of applications. Unfortunately the tutorial that you have linked to your post requires the NI 294 x / 5 x hardware and Communications of LabVIEW. If you have questions about a specific application for your 2932, please post more details and we would be happy to help you.
-
Series communication between computer and cRIO
Hello
I am not new to Labview or cRIO programming, however, venture in for my first try at the serial communication. I have a controller (not original NOR) that sends data over a serial RS232 network I want to open a parallel session to the data that I collect with a cRIO. Before we get to integrate, I try to test with a series, my computer cable and hyperterminal communications and the serial port cRIO. I followed and validated exploitation and drivers with the following text:
How to do a loopback Test series
http://www.NI.com/white-paper/3450/enHowever, when I try to use the following example, I get nothing:
Transfer data between cRIO and host series
https://decibel.NI.com/content/docs/doc-3816Any ideas on where to start? I appreciate very much all the advice.
Thank you.
I have confirmed that it is a right. I'll try a null-modem cable.
Thank you!
-
Communication between Labview and Rn42 Bluetooth
Hello
I am currently working on a project that requires communication between a bluetooth equipment and my pc with bluetooth built-in. The bluetooth hardware is verfied working with Blueterm on android. However I'm unable to connect with my laptop blueterm. Is back a unabe to connect error. I use bluetooth vi without series or visa. This method is suggested? Thank you
-
Original title: cannot establish a network connection
Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?
Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:Diagnosis of IP Configuration
Invalid IP address
Info
Zero (0.0.0.0) detected IP address
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: reset the network connection
action
Disabling the network card
action
Activation of the card network
Info
Successfully activated network adapter
Info
Zero (0.0.0.0) detected IP address
action
Repair Manual: Reboot modem
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
Info
Redirect the user to support call
WinSock status
Info
All base service provider entries are present in the Winsock Catalog.
Info
Winsock Service providers strings are valid.
Info
Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
Info
Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
Info
Entry provider RSVP UDP Service Provider managed the loopback communication test.
Info
Entry provider RSVP TCP Service Provider passed the loopback communication test.
Info
Connectivity is valid for all Winsock service providers.
Diagnosis of network adapter
Network location detection
Info
Using the Internet connection at home
Identification of network adapter
Info
Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
Info
Ethernet connection selected
State of the network adapter
Info
The network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn
FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
warn
FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
error
Could not make an HTTP connection.
error
Could not make an HTTPS connection.
error
Could not make an FTP connection.
I found the problem (s), even if I am always left with a few questions.
During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.
The solution:
(1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.
(2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.
Maybe you are looking for
-
Satellite L750D - keyboard & touchpad has stopped working
Hello guys My keyboard & touchpad stopped working today.Its a Satellite L750D Part # PSK36A-009008 7B339221W serial No. I tried a restore to an earlier date Can anyone helpPLEASE, I BEG YOU.
-
iPod touch 5th generation does not illuminate.
I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does no
-
I have dell inspiron 1501 with windows 7 ultimate 32 bits of the operating system, but there is a problem with the evaluation of the system whenever I tried to note I received an error message as windows system assessment tool stopped working.please
-
move my documents and etc...
Windows XP, Windows Vista, etc. Still, I moved all my personal documents, photo and music files on a different disk, etc., so if my system breaks down, I lose all of my personal information. can someone tell me how to on windows 7? I tried to copy it
-
Computer computer = laptop Acer Aspire AS9810-6829S/N = LXAF 15 707 0065 023 00 60V0Operating system = Windows Vista Ultimate... Service Pack 2Problem = DVD player does not work!DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device Measures taken by the ow