the c:\windows\system32\gpedit.msc file is missing

Similar Questions

• The C:\Windows\system32\mshtml.hlp file is missing

  I get this error message if I try to save a picture to e-mail the file C:\Windows\system32\mshtml.hlp is missing. On websites, there are links invisible and images. For example, the squares above this entry are empty, but if I move my cursor over them, the words seem to describe the action of the box, e.g. bold, italic.  Help, please. san2h16

  0

  In an attempt to save a photo in Outlook Express, try this, bring up the email with the picture in it and

  then upstairs, Clk file and save as and save it in a folder or your desktop. In my case, it opened in

  Windows Mail, then I could do a right click on the image and save as.

  If you save from Windows mail, it can record as usual.

  Good luck

• When you try to run the defragmentation, getting the error "mmc cannot ope the c:\windows\system32\dfrg.mmc file.

  I really need to defragment, but I get this error msg.   MMC cannot open the file c:\windows\system32\dfrg.msc

  
  
  I've had this problem for awhile now and simply ignored. I have no need to defragment is an important channel now. Help, please?
  Thank you;
  Gail

  Hi hhgail,

  See the article following some possible troubleshooting:

  http://support.Microsoft.com/kb/914231

  I hope this helps!

• Error SP3 cannot be updated to SP3. The c:\windows\system32\comctl.dll file is open or in use by another application

  I am running windows xp sp2, and my system no longer recognizes my cd/dvd ROM. I tried using microsoft 'Fix It', but it says I need to run service pack 3. During the download of update I get error SP3, the file c:\windows\system32\comctl.dll is open or in use by another application. All the closed only apps.are execution update for sp3.   The cd/dvd ROM error says file in the registry is missing or corrupted. I'm stuck. Anyone know what I can do?
  Thanks, Rokcney

  Hi Rokcney,
   
  Follow the steps listed in the section "Let me fix it myself" in the following article to resolve the problem:
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• help \Windows\system32\winload.exe file is missing or damaged

  Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

  \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• Windows system32\config\system file corrupt / missing

  I have Windows XP Home edition on my Sony Vaio. Cannot start Windows because I get a msg saying following file is damaged or missing windows system32\config\system
  Sony support suggested I start mode F8 and select know last good configuration. I tried and got a msg saying that Windows could not start because the following file is missing or damaged
  \SYSTEM32\NTOSKRNL.exe
  Sony support is now suggesting a full recovery, but I don't want to lose all my data!  Any suggestions on what I can do to fix it, but also, let me keep my data?  Thank you!!

  
  Corrupt des/windows system32\config\system missing file? How to fix without losing my data? Support Sony says full recovery of the system, but I'll lose data and sounds very drastic!

  e star,
  For your Windows CD, which would have been provided by the PC manufacturer.  Sometimes they have a partition on the hard disk that contains the recovery software and can be viewed during the start up.  You should check with the manufacturer of PC for more information about the recovery options.  Also if they did not provide a CD sometimes they offer the recovery media for sale.

  The problem here is that something has happened to the ntoskrnl.exe file.  It is difficult to replace just this file because the version that's on a CD may be different for the version that you had on your system.  If replace you it with another that it could potentially cause other problems.

  At this point, you will need to do a repair install or restore clean install\factory.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CyberDefender diagnosis claimed the C:\Windows\SysWOW64\defrag.exe file is missing.

  Original title: CyberDefender diagnosis

  This promo 'Double my speed .com' is a bait & switch. $40 for their 'diagnostic' software, then someone turns to sell you a package of $400 maintenance. A container of the slow cooker.   However, their 'diagnostic' has stated that this file is missing from my system:

  C:\Windows\SysWOW64\defrag.exe

  I have had a lot of wrong with my Firefox browser lock up lately (which the 'seller' useful said they could fix), so I came on this site to download it, but a search comes empty.  Has anyone concerned with that?

  Hi Benthoven,

  You can try to run the disc, defragment, and see if it works. If it works, then you can ignore the message of C:\Windows\SysWOW64\defrag.exe.

  Step 1:

  You can read the following article and try to run Disk Defragmenter.

  Improve performance by defragmenting your hard drive

  Step 2:

  You can read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  About Firefox, you can try to open Firefox in safe mode and see if it helps.

  For more information, you can check the support of Firefox at following link:

  http://support.Mozilla.com/en-us/KB/safe%20Mode

  If you need help, then you can get in touch with Firefox support.

  http://support.Mozilla.com/en-us/Firefox-home

  Hope this information is useful.

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• can not do a disk defragment - C:WINDOWS\system32\dfrg.msc

  Original title: can not defragment

  MMC may NOT OPEN THE C:WINDOWS\system32\dfrg.msc--like hayshaker1 but my hp pavilion a1203w did not come with a cd of xp

  When you click Defragment now for a player if you see a message like this:

  MMC cannot open the file C:\Windows\system32\dfrg.msc.

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Somehow (perhaps malware) the msxml3.dll file became unregistered, then re-register the file.

  Click Start, run and enter in the box:

  regsvr32 msxml3.dll

  Click OK and you should see a message like:

  DllRegisterServer in msxml3.dll successful.

  Test your button defragment now.

  There are several problem with hayshaker1 wire.

  The thing suggested trying guess you have an XP CD

  The thing suggested to try will not solve the problem.

  If the dfrg.msc file was really lacking, you will get a different error.

  The thread has no happy ending.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• my files show that I'm missing windows\system32\dfg.msc

  When I try to defragment my system it says I'm mising windows\system32\dfg.msc

  The error message probably indicates that dfrg.msc is missing (you left the r).

  Do a search on your entire C drive to DFRG.msc

  Assuming that he is really gone, download on my SkyDrive, and put it in C:\Windows\system32.  Click on--> here
  Note that depending on which browser you use to download it, you can not see the MSC file extension in the list and when you download the file it also doesn't have the correct file extension.  If necessary, rename the dfrg.msc file when you save it.

  You can also defragment your drive by opening a command prompt window (start > run > cmd > OK) and typing

  Defrag.exe {press Enter}

  You must use the switches and parameters, as explained here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/defrag.mspx?mfr=true

  For example:

  Defrag.exe C:/v {press Enter}