The CALLED RECEIVER will assume all additional costs?

Hello.

I understand that he has had several discussions with a similar question, but the thing is that the answers provided were completely irrelevant.

Ce_que I want to personally know is and perhaps others too: if I made a call via Skype from a computer to a number of portable stranger who did not have Skype installed, the person RECEIVING the call will have to pay as if 1) THERE WAS A CALL MADE overseas (which implies that there are additional costs involved), or 2) a CALL FACT LOCALEMENT (involving there is no international roaming charges) etc. ; costs are exactly the same that it would cost the receiver if the call was made from a local phone number)?

Please understand that direct me to the page of international call rate will not help me, because I want to know if the receiver will have to pay additional fees to pick up the phone when I call from abroad, NOT from the APPELLANT.

Thank you.

Ohayo-san wrote:

I want to know if the receiver will have to pay additional fees to pick up the phone when I call from abroad, NOT from the APPELLANT.

Thank you.

Hello

First of all there is no 'international' with Skype calls. All calls are 'local' in the world. It's because Skype calls travel goes internet and only "break" to PSTN/cell at one point close to the recipient's phone. The same applies if you call the other side of the world or simply call your neighbor.

Calls to a mobile phone (from anywhere) are so "local". Skype does not receive calls. If the cell phone carrier charge the owner (some do - others do not), it depends on Plan of the owner of the relationship with the carrier. In any case the call (from anywhere) will be seen by the carrier as 'local' and reception fees (if any) would be only a few cents.

Hope it clears for you.

TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.

I recommend that you always run the latest version of Skype: Windows & Mac

If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you.

Tags: Skype

Similar Questions

  • We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

    We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

    Hi there, therex!

    It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

    Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

    Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

    Thank you for using communities of Apple Support and have a great day!

  • The printer receives do not all data. It is caused by the MAC address filtering.

    How can I solve this problem.

    The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

    HP Officejet 4500 - G510n wireless all-in-one printer

    Not at all use MAC filtering.  Make sure it is off in your router.

  • How can I add two pages just before page 7 of the book, which will change all the page numbers that follow?

    Hello

    I'm close to finishing a book of 257 pages.  All pages are numbered automatically down, and I spent a few weeks carefully constructed an Index at the end of the book that has all the right page numbers listed for everything.  So whatever I do, I can't change my page numbers.

    But at this late stage, I would like to add a few epigraphs (quotations) in four or five places (I just got this idea today, I'm afraid).

    Is it possible to add a few pages here and there (I will add two pages at a time, I know, or he'll hit all the pages that follow, half of them designed to be left, and half designed to be on the right - off) that are not numbered, and that will not affect the numbering of the following pages?

    Kind regards

    Malcolm

    It is not Automatic way. If you are ready to have unnumbered pages which are not included in the number of pages, you can, for each page the inserted value

    (1) select the first page after the pages will be added

    (2) in the menu pages palette, use the Options Section and number and the page number of started with the value what it is already. In this way, adding pages will not affect the numbering.

    (3) in order to avoid conflicts with the new pages page number, set their numbering on something else as 1,2,3. (as i, ii, iii, for example)

    For later use, you can configure your index with the indexing of InDesign tools, if a false problem, as you would have been able to add the pages and then re - automatically generate a correct index.

  • The Surface RT will be all support stiletto?

    I ordered a Surface just before RT and wondered what stylus support, if any, it will have? I don't know the Surface with Windows 8 pro will come with the stylus and use technology to block palm, but this same stylus works on the RT version, or will be stuck users using a stylus bulky as those that are available for the ipad? Any input would be appreciated, thanks!

    Unfortunately, you're stuck with the bulky pen. Surface RT supports a stylus capacitive like the iPad or Android devices.
  • Can I have a home network that is a mix of wired and wireless, and be able to use devices connected to the pc without wire while working from a pc cable and the network map will show all?

    I have a router Linksys Wireless-N-large band with 4 catches on and 1 ethernet to my internet modem cable. Wireless connections work well in my relatively small house. Rather than to buy several USB wireless receivers, I thought just to use the ethernet # 1 and plug it into my computer close to the router.

    Hello

    Any computer that can connect to the router (wire or wireless) can be part of the same network.

  • When I move my cursor on the screen, it will highlight all of the text that affects the cursor. It also happens when I read my email. I don't hold down any other key touhing anything else.

    I use Windows 7 and office.  MY email account is through yahoo att.net

    Could be a hardware problem with your mouse or touchpad.

    If you are using a mouse, have you tried to plug in a different mouse?

    If you use a Tablet, have you tried to use a mouse?

  • where we found all the duration of the call to ios 9.2

    How we found all the durtions call in 9.2.1 ios iphone 6

    For individual calls: phone app > latest > tap the blue I in a circle to the right of the call.

    For all calls - duration of life and since the last time reset you statistics: settings > cellular > call times

    Another source of information is the site of your mobile operator.

  • 7 adapter w/lightning iPhone headphones. The caller does not hear me

    When I make calls or receive, the person at the other end of the line can't hear me but I can hear them.

    In this case more than 50% of the time until now, in fact I would say more like 75% so far. Sometimes its fixed by pulling me on the adapter of the lightning and put it back in the phone.

    Today, I put through a few tests in-depth using three different sets of headphones and had the same problem with all of them.

    Anyone else having this problem?

    I'm having the same problem also. Pulling on the adapter of the lightning and reintegrate them into the port seems to solve it, but then happens again next time you receive a call.

    I used two different sets of headphones with the same results.

    The remote control also do not work and can not adjust the volume of the call.

    Assuming that he is part of the issues that have been reported and will be fixed in the next update?

  • The installation program will stop Message during the installation of CS3

    I get 'the installation program stops running Message' after disc 1 ends and ask disc 2 when I try to install CS3 Master Collection.  This is new Dell Vostro 270 s PC with Windows 7 Professional, which replaces a HP Windows 7 Home Edition. CS3 ran OK on the HP.  Suggestions?

    So please try to download a new copy of the installation files.  What to ask a second disc indicates he has difficulties to locate the required installation files.  With the download, you will have all the files installation in one place and it will be not necessary to insert the CD.

  • by selecting all the blocks of text on all visible layers

    I want to select all the blocks of text on all visible layers.

    the script below will select all the blocks of text, even in groups, but if the layer with the text is invisible the script error. (target layer cannot be changed)

    If (app.documents.length > 0) {}

    var doc = app.activeDocument;

    var numTextFrames = 0;

    for (i = 0; i < doc.textFrames.length; i ++) {}

    textArtRange = doc.textFrames [i];

    textArtRange.selected = true;

    }

    }

    So I made this script to select blocks of text on only visible layers, but now missing text belonging to a group.

    var layerCount = activeDocument.layers.length;

    var docSelected = activeDocument.selection;

    for (i = 0; i < layerCount; i ++)

    {

    currentLayer = activeDocument.layers [i];

    If (currentLayer.visible == visible)

    {

    for (j = 0; j < currentLayer.textFrames.length; j ++) {}

    textArtRange = currentLayer.textFrames [j];

    textArtRange.selected = true;

    }

    }

    }

    can someone tell me why it is not some frames of text bound in a group when made this way and is it possible to get all managers of related texts selected on all visible layers?

    Thank you

    Duane

    Try this:

    if (app.documents.length > 0 ) {
        var doc = app.activeDocument;
        var numTextFrames = 0;
        for (  i = 0; i < doc.textFrames.length; i++ ) {
            try {
            textArtRange = doc.textFrames[i];
            textArtRange.selected = true;
            } catch (e) {}
            }
        }
    

    Have fun

  • The simple geometry Gets the error ORA-29532 on all calls SDO_GEOM

    Hi all

    I have a single point in a table in such a way that the query:
    select SDO_GEOM.VALIDATE_GEOMETRY(geomObj, 0.05) from testvalid;
    /* Returns */
    SDO_GEOM.VALIDATE_GEOMETRY(GEOMOBJ,0.05)
    'TRUE'
    However the query:
    select SDO_GEOM.VALIDATE_GEOMETRY_with_context(geomObj, 0.05) from testvalid;
    Receives the following error message:
    ORA-29532: Java call terminated by uncaught Java exception: java.lang.NumberFormatException: empty String
    ORA-06512: at "MDSYS.SDO_3GL", line 658
    ORA-06512: at "MDSYS.SDO_GEOM", line 519
    ORA-06512: at "MDSYS.SDO_GEOM", line 558
    ORA-06512: at line 1
    The data itself are a unique SDO_POINT_TYPE:
    select GEOMOBJ from testvalid;
    /* Returns: */
    GEOMOBJ
    '(3001, , (174.092329032787, 129.420551704918, -71.2857142857142), , )'
    I think the problem is something to do with the accuracy of the stored X, Y and Z values in point because if I'm running the following:
    update TESTVALID set GEOMOBJ.sdo_point.x = cast(GEOMOBJ.sdo_point.x as number(8,3));
    select SDO_GEOM.VALIDATE_GEOMETRY_with_context(geomObj, 0.05) from testvalid;
    /* Returns: */
    SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(GEOMOBJ,0.05)
    'TRUE'
    Similarly, running a direct comparison of an object made in the textual representation of the point fly works fine:
    select SDO_GEOM.VALIDATE_GEOMETRY_with_context("MDSYS"."SDO_GEOMETRY"(3001,NULL, "MDSYS"."SDO_POINT_TYPE"(174.092329032787,129.420551704918,-71.2857142857142),NULL,NULL), 0.005) from dual;
    /* Returns */
    SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT("MDSYS"."SDO_GEOMETRY"(3001,NULL,"MDSYS"."SDO_POINT_TYPE"(174.092329032787,129.420551704918,-71.2857142857142),NULL,NULL),0.005)
    'TRUE'
    Note that I only noticed this problem after upgrade to v11 v11 R2. In addition, the same error ORA-29532 happens when executing calls SDO_GEOM. [x] function such as SDO_GEOM. DISTANCE(). The problem is not limited to the geometries of type SDO_POINT_TYPE, but the problem only happens on some geometry entries in my database. It is reproducible in that the same geometry will continue to fail and the only solution I found is to try to round up its precision in x, y or z. I don't know how to round the precision for the types of SDO_POINT_TYPE easily, so one of my problems is that I find myself with a any dispersion of other geometries that I can query is no longer in space.

    The data itself was inserted from MATLAB (which connects using drivers of ODBC Oracle Java v11) which converts my details in Java.Math.BigDecimal and binds to a prepared statement oracle.
    It is possible that I consider that the insertion is made from different computers, some of which are 64-bit computers. Maybe somehow these machines are pumping in too large of a precision coordinates for the geometry of the oracle?

    Any help would be great I am quite lost here.
    If the precision is indeed the problem, anyone know how can I cut these surplus values after the decimal point for all types of geometry?


    Thank you
    Sven.

    It is only related to the version of the server.
    So once the database is 11.2, that corruption won't happen.

  • Get the message of incoming call on HP 7520 all-in-one Photosmart

    I had a professional hook up my HP Photosmart 7520 wireless all in one.  I have a special ringtone that is put in place for faxes and also

    I get phone calls on this line. Everything works fine, but lately I've noticed when I get a phone call

    a message appears on the screen of the printer saying incoming call Auto answer on ignore or accept. I also get this messge

    for incoming faxes. If you do not click on ignore or accept that everything works well. You will get your phone call and also the

    Fax will print. I do not know if this message appeared on the screen of the printer or I'm just noticing.

    I think I started to get this message calls and faxes. Can someone tell me if this message should always

    appear when you get an incoming call or a fax or is there a setting I need to change to get rid of the message? The message really is not hurt anything if you pretend it isn't there, for incoming call example, message, leave it alone and pick up phone and all is well. The same thing with the fax. I have a distinctive ring of a fax, a double ring, but the message remains displayed "call auto answer incoming on ignore or Accept." If you do not click on ignore or accept the fax starts printing and the message disappears.  I swear I've never seen this message before.  Can anyone share any light

    on this subject? I don't know if I make a mountain out of a hill of the mole, because everything still works, but I

    never remember just to see this message on the printer display screen before and I would like to know if it comes from an update, or if I've accidentally changed something, or if it was always like that and I just noticed. Please, if anyone can shed some light on this, I would be grateful, because I really think that this message has begun to appear even if everything seems to be in working condition. All answers would be appreciated. I know I'm old, but I hope I don't get senile no also. The only thing that has happened between the time wherever I noticed this message is I needed a Java Update and I got a fake virus. This was my tech support-assisted and supported.

    Thank you in advance.

    Hi go_pens,

    Your printer has a feature that allows automatic updates. There was actually a patch last week or the week before for this printer. These updates to the firmware of the printer. I think that your mind is still intack, I believe, you're not senile.

    I don't think the message appeared on the printer before, I guess you're right, and that the update made this change. In addition to the automatic response accepting faxes for you, you now have the possibility to accept or ignore the fax before that the automatic response accepts the fax.

    I hope that this addresses and solves your request! Thanks for joining the HP Forums. If there is anything else, we can help do not hesitate to ask.

  • Common cold called the India telling me that my computer is corrupt and needs attention at a cost. The call of this morning came from 02533639006.

    Please could someone tell me if the calls of the India telling me this computer is corrupt and needs attention to the cost are to be considered as a suspect.

    This morning, my husband took one of the many calls from a company whose name can never be clearly understood.  Call came this morning from the above mentioned phone no.  It was a particularly tough call, insisting that they knew there was corruption on my system and when my husband asked for the source of this information and how they would take care and at what cost, the appellant insisted to know the age of my husband.  When he asked the appellant to bring the problems that he was speaking in an e-mail that he rang off the coast.

    As has happened so often before, could someone please let me know what steps I should take to ensure that all information on the State of operation of my computer is genuine and comes from a reliable source.  My husband and I are retired and is concerned by the number of calls we receive from this type.  We had an audit by computer not so long ago and everything was there at that time.  Despite the running is a little slow, I don't have serious problems that I know.  I learned to be patient when waiting for the computer to operate as required.

    I look forward to hear from you in due course.

    Thank you very much.

    It's FAKE and SCAM, because of course, you could report it to the Ministry in charge of fraud in your country.

    Take a look on:

    http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

  • I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

    Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

    Hello

    Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

    WARNING: Unable to verify timestamp for ewusbwwan.sys
    ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
    Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

    ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
    or a device attached to it.

    BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

    WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
    ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
    Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

    c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

    This driver update.

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    ========================================================

    Check with HP Support, their drivers and documentation online and ask in their forums
    on known problems. Updated BIOS, drivers of low level chipset and on-board major
    and drivers of separate devices (see methods of updating driver below).

    BiosVersion = F.03
    BiosReleaseDate = 07/09/2012
    SystemManufacturer = Hewlett-Packard
    SystemProductName = PC HP Pavilion Sleekbook 14
    Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
    SystemVersion = 087F1000003B5900000310100
    SystemSKU = C0P30PA #ACJ
    BaseBoardManufacturer = Hewlett-Packard
    BaseBoardProduct = 18F9
    BaseBoardVersion = 82,12

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    -----------------------------------------------------------------------------------------------------

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
    Microsoft drivers - update those without drain in their names. (Also update BIOS and)
    low level chipset drivers.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now click on
    Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
    Click on - uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Windows 8/8.1 - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Windows 8/8.1 - Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Windows 8/8.1 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ----------------------------------------------------------------------------------------

    Tests of memory intercept all errors such as memory do not match (possible even for sticks
    seemingly identical) and when the faster memory is placed in system behind the slower memory.
    So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
    show a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For the Windows Memory Diagnostic tool.

    WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
    list - and follow the prompts.

    How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
    the name is "Windows Memory Diagnostic".
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    ======================================================

    After doing ALL the updates you can and if the problem persists, run DriverVerifier.
    (Remember to use the methods Windows 8 posted at the top of the first answer above).

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7.
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • gradually increase the loudness

    If it of a way to change the volume of the ringtone to sound with low volume first and then gradually increase the max volume?

  • replacement of card mother m6 HP envy without replacing the cpu or gpu

    I have a computer laptop envy m6 1102 - its who has problems with the motherboard that needs to be replacedcan I replace it with replace them it's cpu/gpu?

  • x 220 Tablet problem by clicking on

    Hi all I have this huge problem with my cursor randomly making and clicking on the screen without being hit. I had not had this problem until after I had my cracked screen replaced by a new one. I tried to unplug the mouse, disable the touchpad, etc

  • HP Photosmart 7520 will be black printing ink ot

    My photosmart 7520 quit printing black in the middle of a print job.   All cartridges except black needed changed.  I did this and no black printing.  Changed the black cartridge just in case.  No black printing.  I cleaned the connections of the ele

  • Group Policy component wizard plug-in software is not available

    When you open the microsoft management console, I noticed that I don't have the political group plug-in software component wizard.  I have however an another snap called "local users and groups.  The question I have is how I added to my system this a