The Capt 7 Audio has stopped working
I recently installed Cativate 7. My Audio was very well originally, but has suddenly stopped working in new and old projects. The speaker in the time line is active. Any suggestions?
Check your publication settings in preferences > project > publication settings. There is a check box there that determines whether or not the audio is included when published. It could be set to OFF.
Tags: Adobe Captivate
Similar Questions
-
Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value? the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover
Hi Susan,.
1. are you able to hear the system sounds?
2 are you facing any problem with Dell webcam?
3. What is the number of the model of the computer?
Method 1:
Run the hardware and devices Troubleshooter and check if that helps:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
To resolve the problem with the sound, I suggest to refer to article and follow these steps:
If the problem is not resolved, please respond with more details.
-
When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client. I have gmail for my email. You are able to help with this problem? Thank you, June Fleischmann - my email address is * address email is removed from the privacy *
I suggest to see if there are updates or new versions available for IncrediMail.
If still no luck, I suggest to ask the support of IncrediMail
I hope this helps.
See you soon,.
J
-
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
"the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you
First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running. Please do.
Secondly, there is no describe your system. Tell us who makes your system and its model, if a packaged system. If not packed, please tell us who manufactured your motherboard and model. If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.
Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.
Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver. If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site. If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model. If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes. Nor should download the drivers through Windows Update, except as a last resort. If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates. Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.
No member of this forum is omniscient! Provide complete information leads directly to all the answers!
-
Bootstrapper.exe has stopped working!
Hello! I try to update my Garmin GPS and have saved the program on my desktop. When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".
I searched the internet and forums of Microsoft for answers, but I don't know why this is happening. I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL. I restarted my computer and I tried to rerun the Garmin update. I got the message again. Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?
All the updates of Windows and Microsoft are up to date. I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2. Could someone help me please? I'm pretty knowledgeable with computers, but it frustrated me no end.
Thanking you in advance,
stillcrazyat49
Hello
1. have you made changes to the computer recently?
2. the program is already running while update you?
3. where did you download this update?Method 1.
I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
May be a third party application is causing the conflict.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
Method 2.
If the problem persists, it is recommended to contact Garmin support and check.
http://www.Garmin.com/Garmin/CMS/site/us/support/I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I have a message on the screen indicating the dell support center has stopped working how can I solve this problem
Hello
as you have problems with the Dell software, contact Dell
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
or ask in the Forums of Dell Support
-
I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?
Hello
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it
It is not compatible with vista, you can try running it in a previous operating system mode
This does not work for all programs
read the information below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
____________________________________________________________
and read this information MS, too
http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard
-
I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2
I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2
Hello
Contact HP support because it is their software problem
http://welcome.HP.com/country/us/en/contact_us.html
or ask in the Forums of HP Support
-
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
After you have installed the Rosetta Stone, the Windows Control Panel has stopped working
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
Hey dododododo5
you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below
Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center
If necessary, read the action recommended in the link below microsoft
If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Walter, the time zone traveller
-
I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.
It comes with Vista, upgrade install and activate Forum.
Try in Vista programs Forum:
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
See you soon. Mick Murphy - Microsoft partner
-
Replacement for the preview handler host has stopped working
When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:
Replacement for the preview handler host has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: prevhost.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bc5ca
Fault Module name: hooknt.dll
Fault Module Version: 1.52.0.0
Timestamp of Module error: 49a 20833
Exception code: c0000005
Exception offset: 0000b 951
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 3081
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789Does anyone know how to avoid it?
Hi Ivan 2008,
You can try the network drive mapping & check if it helps.
Create a shortcut to (map) a network drive
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems? Thank you
Original title: frustrated in New York
The problem seems to be the igdumd64.dll:
Fault Module name: igdumd64.dll
Fault Module Version: 8.15.10.1749
Timestamp of Module error: 4a5bdf54The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.
You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:
Maybe you are looking for
-
Pavilion N0X12AV 550-150qe: 550-150qe pavilion N0X12AV model add extra internal hard drive
The motherboard (pegatron s memphis) there the additional SATA card and power supply (300 watt) has the ability to add something like a Seagate Barracuda 7200.10 HD? I called support and was tossed to 4 people and they could not answer these question
-
Photosmart related problems wireless 5510
Hi, don't know where to start here... basically my printer is connected to my wifi and is therefore my macbook pro (osx lion) but I am unable to print because of 'the printer is unresponsive. First, I thought I would try to get the printer a static i
-
assignment of ringtone by program
Hello Is it possible to set the ringtone progammatically for some contacts in the address book. If no incident based support control is useful in this case
-
Mandatory information is not valid SMS blackBerry Smartphones
I had problems to send continuous sms saying invalid mandatory information, can someone help me please!
-
Photosmart all-in-one wireless B109n - problem with detection of the cartridges
I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo). When I tried to use it later, he said that the cartridges were not detected.Strange thing is that when I take one of 4 ca