The cluster Agent installation does not ask for password Agent

Hi all
I try to install configure the management agent on a few nodes of the RAC on Windows Server 2003 64-bit. I installed the agent on other hosts before, but not on clusters. Installation seems to be pretty simple, YES the other nodes automatically detects and installs on them. However, when I do the installation of cluster, I am never invited to the agent registration page register with the administration server. He's asking the host name of the server and port, but never the password. Then the agent installs and starts the service, he is never seen by the administration server.
Has anyone encountered this before? Is it possible to save it now, or should I just try to reinstall manually?

This is an expected on windows cluster behavior, registration of the agent will not be asked.
Once the user installation must ensure the agent on each node manually by emctl sure agent \bin

Tags: Enterprise Manager

Similar Questions

  • Apple Watch does not ask for password

    In recent days, I discovered something disturbing.  If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.  If it's supposed to happen?  I couldn't find anything in the support forums.

    I got my setup shows to use a password because I got it last December.

    Suzanne

    Hi Suzanne

    If you use the following settings:

    -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.

    -On your iPhone, in the application of Eve, go to: Watch My > password > enabled.

    -Also on screen settings of password - unlock with iPhone turned on.

    Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

    Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

    More information:

    https://help.Apple.com/watch/#/apd748b87e2a

  • Stor.E Slim 1 TB does not ask for password

    So I put a password on this disc using the supplied software.
    Then I took to use on another PC and it will not ask for a password?

    Do I have to install the software password on all laptops / PC that I use?

    Lock password software is needed to define the password reset / clear the password already set.

    If the HARD drive / data on the disk HARD has been already locked, you should always asked a password in case you want to access the protected data.

  • Windows 7 does not ask for password when password protected sharing is on.

    Hi guys,.

    I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.

    I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.

    The following conditions are true for both machines:

    Are windows 7 Home premium

    Have file sharing enabled on each respective network adapter

    Are members of the home network

    Are both on the network, called "WORKING group".

    Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.

    Network discovery is on

    File sharing and printer is on

    I tried the two combinations of sharing folders public or not, but is currently disabled.

    Streaming media is off

    Password protected sharing is on

    Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)

    So I won't list them the public parameters are not relevant.

    I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.

    My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.

    I even went to regedit and apply the following on both machines:

    1. Open Registry Editor (Start search - regedit)
    2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
    VALUE: 1
    4 reboot your PC and try again to establish the connection.

    Can anyone help?

    Thank you people!

    I think I've cracked the question:

    I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.

    I then removed and put in the passwords and then disconnected cache and back in and asked again the password.

    I tried the same thing on my other account, but it has not yet requested.

    It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.

  • by using a standard user account, when it is run as an administrator, system does not ask for password

    • I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
    • I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?

    But the my administrator account has a password!

    Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.

  • e-mail does not ask for password, unable to connect

    my email account does not give me a sign in page to put my password.

    Try http://mail.businesscatalyst.com. Enter your e-mail address and password and you should be able to access your mail.

    See you soon,.

    Mario

  • Update of applications does not ask for password

    Hello

    I put my settings to use one password to update apps on my iPhone 5, but since I have not upgraded to iOS 10 none appearing guest to enter the password when I hit the button to update for any application.

    Please think about if I'm missing all parameters

    Thank you

    I don't think that a password has already had to update the app store applications that are already installed on your device. Just enter a password when you download an app for the first time.

  • Windows XP does not ask for password for a secure network, wifi not connecting. Says "validating identity".

    Have tried just about everything I can think of. computer is connected to the front secure networks without problem.

    More information would be useful.  Windows XP did not support thereafter until SP3 WPA2 wireless encryption, so if you have not installed SP3 and try to authenticate on a network protected by WPA2, it may not work.

    Assuming that you do not have SP3 installed, try to go into your wireless network configuration / configuration screen.  (There are several different configurations of wireless, including ZeroConfig, but we do not know that you are using).  All most of them save previous in a 'profile' wireless connections so that when he meets this wireless again, he knows how to configure itself.  Find the section of your configuration screen profile, look for the SSID of the router you are trying to connect, and if you see it, then delete that profile.  This will allow your machine to then reconnect to the router wireless with an open mind.

    HTH,
    JW

  • Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation.

    Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation. Also don't undersatnd how then restore you the other context using the trash of the library? Don't understand that your instructions please the ventilation in portions of beginner. Is - this recurring issue is sought in microsoft?

    Hello

    You solved the problem with the photo library?

    You have been informed that the question about the image library is fixed in the next thread.

    http://answers.Microsoft.com/en-us/IE/Forum/ie11-iewindows8_1/you-tube-videos-do-not-play-after-updating-to/ce05a70a-3548-44e7-b5ed-2602df641dca

    If you are now facing problems with videos from YouTube on Internet Explorer 11, try the steps in the above thread link and check.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • When I start my computer, it does not ask for my password and it does this since I got it!

    Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!

    Hello mk_wolf_69,

    Please see the link below with respect to automatic logon.

    How to enable the automatic logon in Windows XP

    http://support.Microsoft.com/kb/315231

  • I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    Cache and history of the site Clear settings - Safari -.

    (1232)

  • Installer does not accept my password

    Ive tried to install software for music on my macbook pro, but when it comes to enter the password to access icloud to actually start installing it does not accept my password. Signed cloud online with no problem, so I changed my password, is out of the installer and tried the process again but made no difference.

    Did I miss something blatantly obvious? Any advice would be greatly appreciated.

    The installation of the software usually requires the password that you use to connect to your MacBook, not the password to iCloud.

  • Windows 8 will not ask for password on wake up from sleep

    My Dell laptop since the upgrade to windows 8 Windows 7, when I close my lid does not go to sleep, or when I wake to sleep, it does not ask me for a password, everything has been reset to the default values, but I don't know why it doesn't work. someone please help!

    The solution, as someone else has asked this question also and got the correct answer - see http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/password-after-sleep/8ef46143-300e-41e8-aafb-b61782b67145 . There is a new setting of Windows 8 on top normal settings in the power settings.

    Be aware that setting how long time should pass before asking to specify a password is required is a per-user setting, so if you need to change the default value of 15 minutes, it takes to each user created on the system.

    For me, I took me 1 minute rather than always for all users, as it is pleasant, if after an accidental sleep, a user can always resume immediately. But the foregoing I have a password.

  • Windows will not ask for password after disconnection and stop

    machine is aspire R13, WIN 10

    I set up a password for OS - on the machine, do not use a windows account. After the outside panel and closure, opening the lid takes me straight on the desktop without having to ask for a password. What is a password, if anyone can open the lid and have access to everything?

    If instead of disconnecting and leaving the computer to sleep, so he asked a password to wake up - as if an unknown person will have access to the computer to wake up from sleep. How stupid!

    Is that the reason for this is that microsoft is forcing me to use a MS account for the connection in order to use my machine?

    From another forum, the solution was simple: change the password. Now, he asks a password after disconnection.

  • Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

    Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

    Fix missing files:

    Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

    SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

    To resolve the startup problem:

    Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

    In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

Maybe you are looking for