The Compaq nx7400 Notebook PC driver installation

I will soon be reinstall Windows XP Professional on my laptop Compaq nx7400.  I already downloaded the drivers from HP support, but I need to know in what order they must be installed.  I'm especially afraid the buttons outside the laptop will no longer work after the installation.

@evans5179

Hello

You should always install chipset driver as first reboot. It is the most important rule.

I usually install a second Intel Matrix Storage Managerdriver on models with your chipset.

After that, you can install graphic driver to continue the installation process in more comfortable conditions.

The next thing you need to know is that before you are going to install the audio driver, you must install the first "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio".

You do not have to worry about buttons nee. Install HP Quick Launch Buttons, correct the driver wireless, Bluetooth (if you have one) driver and HP wireless Assistant. When you do this all buttons should work without any problems.

Note:

HP Wireless Assistant will help you monitor the status of wireless devices.

Tags: Notebooks

Similar Questions

  • Compaq Evo Notebook - hard drive problem

    Hi eveyone,

    I bought a Compaq Evo Notebook online on eBay two years ago. Yesterday, I went to use it on and got an error of the controller. So I moved the computer and noticed the my cat peeded and he went under the computer and go to some of them in the area of the hard drive. I quickly turned it off and took apart and gently he cleaned with wet towels and let rest overnight with dehumidifiers. I then put together around noon and the computer will not start past the compaq logo, but when I took out the hard drive and tried to see if it would start past the logo, what he did and when I put a CD/OS-Ubuntu and it went to the operating system install screen (since it has an option from the CD). Anyone know what I can do to be able to at least install Ubuntu, rather than start from the CD or recover windows XP.

    Thanks for any help provided.

    Andy

    It seems that the hard drive has been damaged by the cat wee, you can buy a usb hard drive adapter and connect it to another PC, see if it will be displayed in the Solution Explorer, if it copies your files off quickly.

  • The vib with get-esxcli driver installation

    I am fairly new to PowerShell and PowerCLI, so this may be a simple question, but I looked around and could not find a clear example that shows me what to do. I am running 5.0 GA ESXi and vCenter PowerCLI.

    I want to install a network driver via Powercli in the same way, I would say if I ssh directly to the host, i.e.

    software esxcli vib install - v/vib_file_path/vib_file_name = what in Powercli?

    I created the object, as stated in the docand run down from the tree by using the Get-Member cmdlet, so I know what I need is

    $esxcli.software.vib.install)

    But I do not understand what are the options / call method is required for the command to complete. When I run this without any option, I get usage:

    TypeNameOfValue: VMware.VimAutomation.ViCore.Util10Ps.EsxCliExtensionMethod
    OverloadDefinitions: {vim. EsxCLI.software.vib.install.InstallationResult install (deposit of string [], boolean dryrun, Boolean force, Boolean maintenancemode, boolean noliveinstall, Boolean nosigcheck, string, string [] vibname, string [] viburl proxy)}
    MemberType: CodeMethod
    Value: vim. EsxCLI.software.vib.install.InstallationResult install (deposit of string [], boolean dryrun, Boolean force, Boolean maintenancemode, boolean noliveinstall, Boolean nosigcheck, string, string [] vibname, string [] viburl proxy)
    Name: install
    IsInstance: true

    I guess that each of the pairs of hooks is a parameter, so I need give the 3 command options:

    $esxcli.software.vib.install ($1, $2, $3)

    I tried to use a variation of these values, but the error I get is the same:

    PowerCLI C:\ > $test.software.vib.install ($null, "net-IGB - 3.4.23 - 1OEM.500.0.0.406165.x86_64.vib", "/ store /")


    The remote server returned an error: (500) internal server error.
    On line: 1 char: 27
    + $test.software.vib.install < < < < ($null, ' net-IGB - 3.4.23 - 1OEM.500.0.0.406165.x86_64.vib ', ' / store / ")
    + CategoryInfo: InvalidOperation: (:)) [], RuntimeException)
    + FullyQualifiedErrorId: MethodInvocationException

    Anyone see what I'm doing wrong?

    I fear there are some more settings, as indicated in the message

    filing of String]

    Boolean dryrun

    Boolean force

    Boolean maintenancemode

    Boolean noliveinstall

    Boolean nosigcheck

    Proxy chain

    String [] vibname

    String [] viburl

    These correspond exactly with the settings described in the ESXCLI command.

    These are all the positional parameters, so if there is a parameter, you do not need, you still need something in this position.

    $esxcli.software.vib.install ($null $true, $false, $true, $true, $false, $null, "net-IGB - 3.4.23 - 1OEM.500.0.0.406165.x86_64.vib", "/ store /")

    This, or something similar, should do the trick.

  • Fast Web for HP Pavilion dv6-6c75sa notebook PC driver/software

    Hello

    I tried to find this driver/software because it is not in my program files or in the Recovery Manager.

    I saw the solution here http://support.hp.com/us-en/document/c01868333 but the screenshot doesn't look like my Recovery Manager. Instead of installing the software program and Hardware Driver installation all I have is drivers and reinstall the Applications. When I click on that it gives a list of what is available and the IOS/Quick Web is not on the list. I am not given the option to 'Next' or "the driver is not in the list" so am at a loss what to do next.

    I tried the software download page and the driver, but it is not listed there.

    Suggestions are greatly appreciated.

    Thank you

    Hey Viggen79,

    I also noticed that the laptop was not listed. It wouldn't hurt to try to install what the laptop seems to have support for the functionality of QuickWeb.

    If the IOS option is not available in the BIOS, the chances are that feature QuickWeb was not based on this laptop and may not work.

    I suggest just trying to see if it works or not.

  • Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

    Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

    I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

    I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

    Hello
     
     
    The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
     
    Step 1.
    You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
    I would also recommend to check if there are Windows updates for this device.
     
    Step 2.
    Here is the link to download the latest drivers.
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK
     
    Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
     
    This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
     
    For more information see the links below.
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Envy 17 j120na: 10 Windows will not start because of the driver installation failed

    History:

    I have a computer laptop j120na Envy 17 that came with windows 8.1.

    I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

    Question:

    Is this a problem with the driver installation? And if so, how do I return it?

    P.s: System Restore is not an option, I restore point.

    Hi there @Aj1baba,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

    The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

    Have you tried to go into Safe Mode?

    You have media or recovery disk?

    Have you tried to do a Reset BIOS?

    Have you tried perform a hard reset?

    You have beep codes or flashing LEDs?

    Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

    Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

    You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Have a great day!

  • the driver installation failed after startup

    Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

    To install the Conexant audio driver, you must first install the MS UAA.

     

    MS-UAA, ici

     

     OR > MS UAA for XP SP3, ici

    For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

     

      The localization model number

  • Satellite M60 and the display driver installation

    Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
    Shorten one or both of the limit specified below and try again"! that to me?

    Hello!

    This looks like your username to long and the path of files extracted more than 88 characters.
    I think you should change your username or try with another account to update the driver, for example the admin account.

    If it doesn't work try to download the driver again.

    I hope this works, but you can give us feedback, what's going on.

    Good bye

  • HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

    Hello

    I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

    All the drivers have been installed end, except for the Wifi card.

    When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

    Help, please.

    Hello:

    You install the correct drivers?

    The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

    http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

    This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

    File name: sp56572.exe

    This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

    File name: sp56573.exe

  • Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

    Hello.

    I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

    I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

    The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

    Why the Sun Java Runtime Environment is necessary?

    I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

    Thanks in advance if anyone is able to help.

    Kind regards

    John

    Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

    Satellite Pro P100 (PSPAEA)

    Chipset: Mobile Intel (r) 945 PM Express Chipset
    Memory controller: 82945 PM
    I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

    What I installed...

    03 - display Driver
    04 chipset Driver
    05 - network - upgrade Ethernet driver
    06 - network wireless driver
    09 - sound Driver
    10 - driver CardBus controller with UltraMedia
    12 - modem Driver
    13 - modem region Select utility
    14 Bluetooth Stack
    15 - Bluetooth monitor
    17 Hotkey Utility
    21 - SD Secure Module
    22 - SD memory card format
    28. DVD-RAM driver software
    33 user manual
    TOSHIBA fingerprint digital-software (from Vista drivers)
    TOSHIBA-disk-Creater (from Vista drivers)

    What I do not installed...

    01 - Microsoft Updates (I used Windows Update to do this)
    02. Sun Java Runtime Environment
    07. customer Intel utility
    08 Atheros Client Utility
    11 - touch pad Driver
    16 - C - infrared driver
    18 YPP/power button Utility
    19 utilities
    20 - buttons
    23 - assist
    24 - ConfigFree
    25 - zoom utility
    26 PC Diagnostic Tool
    27 CD/DVD Drive Acoustic Silencer
    29 WinDVD Creator
    30 - RecordNow
    31 DLA
    32 - DVD player

    Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

    The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

    With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

    Hope this helps and please post your results as it is good to share their experiences.

    Regards, Rob

    PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

  • Creating a program the evolutionary IVI driver installation problems

    I have problems when you try to create an upgrade for an IVI driver installation.
    I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
    1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

    My problem is the following:

    • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
    • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
      "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

    I noticed the things so far:

    • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
    • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
      What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
      According to the results of this audit, the installation process is abandoned.

    If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
    Maybe I put just an evil version information field, but I do not know that which (if any)...

    Advice would be greatly appreciated!

    I seem to have found a solution:

    The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

    So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

    Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

    This can be accomplished using the Orca tool included in the Windows SDK.

  • HP ProBook 4530 s: need help in the intel graphics driver installation R Hd!

    Hello

    I recently updated my windows for windows 7 to windows 8.1, after installation, I discovered that the screen was too big and he only microsoft basic display adapter, but there was no graphic driver intel.

    When I arrived to support by internet, I was download the R intel hd graphics driver, but when I tried to install it on my pc it shows nothing but errors errors only. Right now am really stuck, I can't play a game.

    Please I really need your help, what should I do?

    Here is the screenshot of the eror!

    b

    Hello:

    Have you tried the driver W8 support for your laptop and driver page?

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_112141_1&swEnvOid=4132

    Your laptop does not have a graphics adapter Intel HD 4400 this is why the driver doesn't work.

  • DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

    Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

    A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

    I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

    Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

    I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

    What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

    I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

  • hard drive installation / do not install the drivers before that I installed Vista

    I installed a new hard drive on my laptop and then installed my vista reinstallation cd before installing reinstalling drivers and utilities cd, and now some of my drivers are missing, especially for the wireless card, so I can't connect to internet / y at - it an easy solution for this?

    Install now and they will update those that are currently installed, or install the drivers, some of whom are misssing.

    Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers, get the computer dealer or the manufacturer of the device or disc they provided but prompting directly from web site can be better because they may be more recent than those appearing on the disc. (NO Microsoft updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The driver installation failed BlackBerry Dev Alpha 10

    When I plug my dev alpha bb10 into my computer, it says driver installation failed. Office software Blackberry cannot pick it up. What should I do?

    Try going into the menu alpha dev (small gear top-right).  Go to storage & sharing.  Set the «Connect to Windows» USB connections

    Who can help, mines on auto and never given trouble.  There's a first time for everything.

Maybe you are looking for

  • have no search engines after reset

    After the reset of firefox to get rid of bing no search engines appear and I can't find

  • PROBLEMS AFTER UPDATE DOWNLOAD

    I downloaded the microsoft updates and after the closing down and restart computer download I received a message that says: updates not configured correctly coming changesDo not stop your computer. then it restarts continuously and again with the sam

  • 1050 Deckjet

    I have a Deckjet 1051. (Yes, it's a good deal) I just noticed an icon on the bottem of the control panal. Its the shape of a tear and lite. I've never noticed this before?

  • NEX - 5R and LA - EA1 - phase detection or NOT?

    Hello IM owner of the camera Sony NEX - 5R, and I have a question. Hybrid AF system (with phase detection) will work with camera NEX - 5R combo adapter LA - EA1 + SAL-50f18 lens? Or this combo is limited only to contrast detection? Thank you for clar

  • Returns a copy of the hash table

    I have problems by returning a copy of a hash that is normally stored in the persistent store table. final class SyncCentres { private static Hashtable syncCentres; private static PersistentObject persist; private static final long ID=0xdfeab99e040a2