The compilation gets error 7 and return all my strings
Hi, I'm updating of legacy code. It contains references to the paths that don't exist any more (mainly drives on the network).
So I go through the program, and I Exchange each defective path (from the old M:\ or P:\ to the my laptop C:\).
When I run the labview program, it works very well.
However, when I compile the program restores the old paths and gives error 7 when I run the *.exe.
The paths are strings in text boxes (controls).
I tried to check the "include files as library" option in the build specification.
Any ideas? IM using Labview 2012 and the original program comes from an earlier version.
Hey,.
you set the values in the default controls or just change the values?
So just changed, mark the new default values with a right-click on the control-> data operations-> default font of the current value
Kind regards
CMW
Tags: NI Software
Similar Questions
-
How to remove the microsoft e-mail account and return all emails from my old account
I have added a microsoft email account and it imported all my emails in Inbox yahoo into the microsoft e-mail account.
Send them to the other e-mail account
-
I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card
How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
I formatted my CF card already.< re-titled by host >
If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.
In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.
-
When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors
I want to open DDL replicate of the source node, so I run
SQL > @marker_setup
Marker setup script
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Table marker installation script is completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
MARKER TABLE
-------------------------------
Ok
SEQUENCE MARKER
-------------------------------
Ok
When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors
SQL > @ddl_setup.sql
Configure Oracle GoldenGate DDL replication script
Verify that the current user has privileges to install the DDL replication...
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: For a source of Oracle 10 g, the basket of the system must be disabled. For Oracle 11 g and later, it can be activated.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Working, please wait...
Line to the ddl_setup_spool.txt file
Checking the sessions that hold locks on the tables of metadata Oracle Golden Gate...
Full version.
Using OGG as Oracle GoldenGate scheme a name.
Working, please wait...
Script of DDL replication configuration has completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
CLEAR_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
CREATE_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
TRACE_PUT_LINE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
INITIAL_SETUP STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLVERSIONSPECIFIC PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLREPLICATION PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLREPLICATION STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
1453/9 PL/SQL: statement ignored
1455/23 PL/SQL: ORA-00942: table or view does not exist
1464/9 PL/SQL: statement ignored
1466/23 PL/SQL: ORA-00942: table or view does not exist
1478/9 PL/SQL: statement ignored
1480/23 PL/SQL: ORA-00942: table or view does not exist
1485/9 PL/SQL: statement ignored
1487/23 PL/SQL: ORA-00942: table or view does not exist
1492/9 PL/SQL: statement ignored
1494/23 PL/SQL: ORA-00942: table or view does not exist
1499/9 PL/SQL: statement ignored
Error on line/pos
-------------------- -----------------------------------------------------------------
1501/23 PL/SQL: ORA-00942: table or view does not exist
1581/4 PL/SQL: statement ignored
1582/18-PL/SQL: ORA-00942: table or view does not exist
1584/4 PL/SQL: statement ignored
1585/18-PL/SQL: ORA-00942: table or view does not exist
1600/25 PL/SQL: ORA-00942: table or view does not exist
1600/4 PL/SQL: statement ignored
1602/25 PL/SQL: ORA-00942: table or view does not exist
1602/4 PL/SQL: statement ignored
DDL IGNORE TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL IGNORED THE JOURNAL TABLE
-----------------------------------
FAILURE: The Table does not exist
STATUS OF THE DDLAUX PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLAUX STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
0/0 PL/SQL: analysis of completed Compilation unit
1/21 PLS-00304: impossible to compile a body of 'DDLAUX' without sound
specification of the
1/21 PLS-00905: OGG object. DDLAUX is not valid
SYS. STATUS OF THE DDLCTXINFO PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
SYS. DDLCTXINFO STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDL HISTORY TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL HISTORY TABLE (1)
-----------------------------------
FAILURE: The Table does not exist
DUMP DOF TABLES
-----------------------------------
FAILURE: The Table does not exist
COLUMNS OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
GROUPS OF LOG DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
SCORES OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
DDL DUMP KEY PRIMARIES
-----------------------------------
FAILURE: The Table does not exist
SEQUENCE OF the DDL
-----------------------------------
FAILURE: The sequence does not exist
GGS_TEMP_COLS
-----------------------------------
FAILURE: The Table does not exist
GGS_TEMP_UK
-----------------------------------
FAILURE: The Table does not exist
STATE OF THE DDL TRIGGER CODE:
Error on line/pos
-------------------- -----------------------------------------------------------------
126/9 PL/SQL: statement ignored
128/23 PL/SQL: ORA-00942: table or view does not exist
133/21 PL/SQL: ORA-02289: sequence does not exist
133/5 PL/SQL: statement ignored
657/14 PLS-00905: OGG object. DDLAUX is not valid
657/5 PL/SQL: statement ignored
919/25 PL/SQL: ORA-00942: table or view does not exist
919/4 PL/SQL: statement ignored
DDL TRIGGER SYSTEM STATUS
-----------------------------------
Ok
STATUS OF RACE DDL TRIGGER
----------------------------------------------------------------------
ACTIVE
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
LOCATION OF THE TRACE OF DDL FILE
------------------------------------------------------------------------------------------------------------------------
/Home/data/app/Oracle/diag/RDBMS/AppStore/appstore2/trace/ggs_ddl_trace.log
Analyze the status of the installation...
THE STATE OF REPLICATION DDL
------------------------------------------------------------------------------------------------------------------------
ERRORS in the installation of software components of DDL replication (6)
Complete script.
I had been struggling with the same problem for 2 days. You run the script as sysdba, how do you get the error then insufficient? I did my first test GG in February. I've been on 11.2.0.3 + patch January + patch for the integrated capture. It has worked well for me. I went back to my GG test week with 11.2.0.3 + patch of July last and ran into the same problem. The solution for me was the last version of GG. See my previous post for the patch numbers.
Post edited by: ursusca
-
I'm having a problem with Windows Mail. I have Vista. When I want to create an email and find people to send to, then click on the "to:" I do not receive my contacts with folders list, I have just the button get a long list of all the contacts in my contact list and no folder where to choose from... and MANY of them are repeated 2 or 3 times. It takes me forever to browse all of the names to find the little that I could transmit or write. I tried to delete properties, but they simply duplicate himself instead of delete. Since the contacts button, it's how I organized them... but there is no contact on the "create mail" window button click to access my files organized. Can anyone help?
original title: problem with Windows MailHello
I suggest that you check the troubleshooting provided by S of Halima steps and check if they help to resolve the issue.
-
Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?
0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
-
I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?
When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall. Panel\Windows Firewall control page should have shown a message say. If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.
I really think you should try a restore for some time point before you tried modifications, if that is even possible.
If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.
If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting. Your system is in an unknown state as a result of these changes.
You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.
You may need to use the installation DVD to do a repair installation. I hope get you lucky, but you may need to do a complete reinstall of Windows.
-
I can access the internet, get on facebook and hotmail, but I can't pllay games on facebook and I can't open or respond to my e - but, anyone know wats up?
Hi Danny
It is a problem on Facebook. Here are links where you can get help.
Facebook Help Center | Facebook: http://www.facebook.com/help/
Facebook Support Forums: http://www.thefacebookforum.net/forum
Concerning
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
The machine is running XP Pro version 2002 service pack 2 out of the box. I kept it updated regularly for 4 years. A week ago Windows Update stopped running. Then he completely froze and wouldn't start windows at all. I took it to the dealer and their technician said all they could do was to apply the restore disks. I did and now windows is up and running, except of course the software is obsolete way and will not support my existing programs and practices. Immediately I clicked to run windows update, but it will not run. I get a 8024400 error each time and if I can try to help, contact option do too with the 80240036 error.
I tried following a community solutions Center/kb/555461 article but in vain. There is no iuctl.dll file and no wutemp or v4 folder.
At this point, I'm stumped.
I had the same problem, they say that it is because of communication problems, etc, but my internet connection is fine. I solved it download SP3 from: http://www.microsoft.com/en-us/download/confirmation.aspx?id=24 I had troubled 'save' the file so I clicked on 'Run' and updated my windows, then Windows Update worked as usual.
-
Get the codes of error 643 and 646 with these updates.
I can not download successfully the following security updates:
KB953297, KB978380, KB978382 and KB979895. I get the error 643 and 646 code.brit007ca,
Take a look at this article that she addresses your situation: Troubleshooting Windows Update: updated proposed several timesPost back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I don't not re-subscribed to MCAafee Antiplus security last year. I made so many attempts after you remove the program from my file have tried so many times and programs remove all traces of this software. I still have the icon at the bottom of my screen and pop ups several times a day, prompting me to re - register my system ' at risk '?
I need to remove all the things that are associated with Mcaffe.
How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal (MCPR.exe)
http://service.mcafee.com/faqdocument.aspx?id=TS101331&lang=en_US&prior_tid=3&AnswerID=16777217&turl==http%3A%2F%2Fkb.mcafee.com%2Finfocenter%2Findex%3Fpage%3Dcontent%26id%3DTS101331%26actp%3Dsearch%26viewlocale%3Den_US -
Windows RT question: Get error code 8007045B trying all updates
Help! I tried to install Microsoft updates on my ASUS tablet. It is running Windows RT. Some updates install, while others return this error code. The date, time and location is correct. I did a hard closed down and when restarted, check the updates, my story still returns this error on the following updates:
KB2939087
KB2931366
KB2957151
KB2953522
KB2956575
KB2939153
KB2926765
KB2962140
.. .and a 80073C for KB2955164 update error code
I talked with Microsoft and said ASUS is not supported. I talked with ASUS and said it was a Microsoft problem. Why is it so difficult? Why is - not a Microsoft help me? All I'm actually trying to do is to get the Tablet up and so I can update to Windows RT 8.1, but I can not even past the first round of updates running. The Tablet is brand new... Any suggestions?
: () o
Hello Loretto,
Thanks for posting your question on the forum of the Microsoft community.
I would like to know some information about the problem so that we can help you better.
Have you recently made any changes to software?
I would suggest trying the following methods and check if it helps.
Method 1:
Convenience store to run Windows Update and check.
Refer to this article:
How to solve the problems of connection with Windows Update
http://Windows.Microsoft.com/en-in/Windows-8/how-solve-connection-problems-Windows-UpdateIf this does not help, then use method 2.
Method 2:
Please use the suggestions in this article and check the issue.
Reference:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756I hope this information helps.
Please let us know if you need more help.
Thank you
-
Get error 80070490 and 80242006 codes while Windows updates
Original title: I get errors with the windows updates.
I get errors with the windows updates. Updates KB937286, KB2443685 KB971029, KB2467659, KB2296199, KB2442962, KB2436673, KB2423089, KB2305420
All codes error 80070490 (unknown) then KB2416400 has error code 80242006. Don't know what to do!
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform operations from the links below and see if it helps.
Hope this information helps.
-
At the start, get error loading driver udesiab.dll
on startup, I get an error loading driver udesiab.dll, no matter who with an idea what is this driver or how can I remove it?
Hello
read the slot results in google for "udesiab.dll."
http://www.google.com/search?hl=en&source=HP&q=udesiab.dll&aq=f&aqi=&AQL=&OQ=
There is no search results for her that usually indicates that it is malware or a stay starting entry of for her
to be on the good side for malware scan;
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
Maybe you are looking for
-
Hi- I try to print a photo of an estate inventory. I have the pictures in a folder on the Photo. When I open the folder and select the photos you want to print, I will file and down to print, which is grayed out. I have no idea how to do that, and
-
Firefox v28.0, Mac OS X 10.9.2, 3.5 GHz Intel Core i7. Running in safe mode. In the Preferences menu, I have the "open new window in a new tab instead" box checked but when I click on links the new page opens in the current window. If I order click o
-
Satellite 1900-101 - what module WLAN do I need for it?
Hello There is a button for wireless on the keyboard!Can what type of module I build striking WLAN? Or is it not possible to have WIFI with this laptop? Thank you Matzefratze
-
We moved to a new server vCenter under a new name, when we went to 4.1 and now all services (FSMChildServices) are orphned. How can I remove these? I want to keep the same names, but get an error that it already exists when I try to create. Or if
-
The Webkit browser blackBerry smartphones - don't click on phone numbers! ???
Seriously! Looks like such a basic feature that existed even on my old blackberry. I can't click on the phone from the browser numbers to make a call. Is this true or am I missing something here. Frustrated by the lack of functionality. Thinking to t