The computer browser Service 1068 error - dependence or the Group was able to start
I hope you can solve a problem that I'm trying to solve for 2 weeks or more.
My small house nat network - XP Home - was working fine then I found I could no longer see / access files remotely on my network. The other PC can see and access my shared files and the other pc, I can ping and Internet access is ok.
Inspection services do not start: - computer browser, desktop and Netlogon - any attempt to boot from the Administrative Tools / Services results an error 1068 - dependence or the group does not.
I ran the network set up wizard, and I tried to reinstall the network adapter and the drivers but no change. I checked the Web sites and sought suggestions; I checked the registry and dll for as suggested in the articles, but have found nothing.
Any suggestions would be welcome and thank you for your time.
Kind regards
Bob D UK
You must start the dependent services. Dependent services are workstation and server. I think that you start the workstation service.
Tags: Windows
Similar Questions
-
I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless. I get the error message: unknown connection status. The dependency service or group was able to start. I know that the router and the wireless work. I tried several of the mentioned patches, but nothing has worked. My Verizon card works.
Hello Chelen,
I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:This response may be useful:"I also had the same problem and the solution above does not work.My problem was caused by corruption in the TCP/IP stack
To fix, you need to run a command as administrator prompt
Start > all programs > Accessories > prompt (right click and run as administrator)
At the command prompt, type: netsh winsock reset
"Ignore all errors, restart and voila'.
-
original title: cannot share internet
I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying
"an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »
Hello
You can view the article in the Microsoft Knowledge base and check if it helps.
Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to"
" "»http://support.Microsoft.com/kb/946481
Let us know if you need more assistance.
-
the dependency of the orgroup faaied to start service unknown Internet connection.
The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help
Hello
· You will remember to do recent changes on the computer before this problem?
· Is the question only for the icon network did you try to open a Web page and check?
· What suggestions do you have tried?
· What is the exact error message?
· Have you tried all the steps from the link?
I suggest you follow the steps mentioned below:
Method 1:
Follow the steps in the link and check if the problem persists:
http://support.Microsoft.com/kb/943996
Registry warning:
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2:
If the previous step fails, follow the steps in the link and check if the problem persists:
http://support.Microsoft.com/kb/936211
Method 3:
If the previous step fails, reset WinSock and check if the problem persists:
http://support.Microsoft.com/kb/811259
Registry warning:
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 4:
Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.
Note: make sure that you enable the antivirus software, other security and firewall programs.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
Connection status: unknown. The dependency service or group was able to start.
Greetings! I have a year old Dell Inspiron. Everything worked fine last night, but when I woke today I couldn't connect to the internet. When I put the cursor on the network icon, it says "connection status: unknown." The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually. In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.
My antivirus (Avira) software is fully up to date from last night. I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause. The guy there said it was a software problem. I tried resetting TCP/IP (netsh winsock reset) without success. I also tried sfc/scannow in safe mode and windows without success. Are there other options?
Thanks in advance.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
Mick Murphy - Microsoft partner
-
So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected. I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:
Unknown
The dependency service or group was able to start.
Thank you: D-Patrick
Please run a check of system files (SFC) & DISM if you're on win 7 or higher
All instructions are in our Wiki article below... If you have any questions please ask us. -
"dependency service or group was able to start.
I have a laptop with vista. my wireless connection is explained by limited access internet and the icon in the launch area shows "dependency service or group was able to start. I have internet, so I don't know what that means.
Hello
I suggest you to refer to this link and check if it helps:
It will be useful.
-
When I try to share my internet connection, I get the following error. dependency service or group was able to start
Hi Jason,
1. What is the brand and model of the computer network adapter?
2. How did you try to share the internet connection?
Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest you make sure that the slot addiction services are enabled.
a. Click Start, select run, type services.msc and click OK.
b. to activate a service, look for it in the right pane, double-click its entry.
c. do not forget its Startup Type is set to automatic, and then click OK.
All the following services must be so configured to use ICS:
Application Layer Gateway Service
Network connections
Knowledge of the network (NLA) locations
Plug-And-Play
Remote Access Auto Connection Manager
Remote Access Connection Manager
Remote procedure call (RPC)
TelephonyAfter checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
I am not able to start some services to get connected wireless. In Device Manager the poster adapter works correctly. The WIFI light is on. Start Windows Wireless Service bar lights up, but the service does not just start. I have run chkdsk and several other parts but registry cleaners I keep coming up empty. Help, please.
I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...
«OMG 911techmedics...» You're crazy GENIUS!
Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.
What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.
I tried:
(1) Microsoft Winsock32 Fix
(2) replacing Winsock dll
(3) Yes Netsh wlan with the set command
(4) order of Netsh reset catalog
(5) LSP Fix.exe
(6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:
Step 1: Click the button START
Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
Step 4: Next, choose 'SYSTEM', is expected to increase again
Step 5: Choose "CurrentControlSet", develops again
Step 6: Select 'Services', develops into a great big list of thingsStep 7: Click on "Dhcp", the right window shows the files in this folder
Step 8: Double click on "DependOnService".
Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done hereStep 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
Step 12: Delete everything in the text are and click OK. You are finished.Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »
Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!
911techmedics saved our skins...
Thank you!!!
The Lady Sharrow...
-
I use Bell Fibe 25
My computor is running on the windows xp proffesional 64
Also don't see xbox 360 image in the area of media sharing in windows media player
????
Hi DougGowers,
Follow the suggestions below for a possible solution:
Method 1: When the "Error 1068" error is logged, view the dependencies for administrative services tab to ensure that the services that rely on administrative services are not stopped. To view the Dependencies tab, follow these steps:
a. click Start, click run, type services.mscand click OK.
b. right-click on administrative service you wish to view and then click Properties.
c. click the dependencies tab.
If the service that depends on the Administrative function is stopped, right-click the service in the Services console, and then click Start. Then, try again changing administrative service.
Method 2: Try the SFC (System File Checker) scan on the computer.
To run the System File Checker tool, follow these steps:
a. click Start and click run, then type cmd in the box start the search.
b. right click on cmd in the list programs, and then click run as administrator.
c. If you are prompted for an administrator password or a confirmation, type your password or click on continue
d. at the command prompt, the following line and press ENTER:
sfc/scannow
For more information, see the article:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
File system (CFS) Checker
You can also see the following articles for more information on sharing media with Windows Media Player:
Share your multimedia files
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media
Listen to music from your computer to Xbox 360
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox
Let us know if that helps.
-
Dependency services or the Group was unable to start on Vista
I have window Vista and wireless internet in my house. The icon that shows if you are connected to the internet has a red x in the way in and he says: "State of the unknown connection of dependency service or group failed to start" I'm sometimes still connected to the internet when it says this, but it disconnects while I'm in the middle of something and I have to re start the computer to get it back. I continue to have the right message.
I tried to disable the firewall.and it does not make a difference. Not sure if this helps, but I have Trendmicro Antivirus and spy sweeper from webroot on the computer. I thought that maybe it was the internet provider, but we went from companies and it has changed nothing.
Help, please.
Thank you
LeahHello
Redefine ALL Windows Services on their default values.
Start right click - type in the search box-> find Services in the high - on - RUN AS ADMIN
BlackViper - Services
http://www.blackviper.com/WinVista/servicecfg.htm=================================
After him above if necessary reinstall the drivers. If WiFi uses the wired connection and if a cable to use WiFi
and if no work download the drivers on another machine and transfer them to removable media.
Don't forget to try to hit F8 you can start and select Mode safe mode with networking.Actually, try updating your driver.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxNetwork connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
The dependency service or group was able to start. DHCP client service.
My computer will basically not connect internet by cable or wireless. Network adapters seem to have gone haywire. Ive done several system restores and even a sfc has to analyze in the command prompt. He said "Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. "Journal >" etc.
It would seem that I corrupted with Vista. If I restore these files or what I have to do my second recovery system? Any help would be appreciated.
Thank you.Hello
ALU is ASUS Live Update, so you should check with the manufacturer ASUS and system and/or generator as you have
in fact to be material errors.------------------------------------------
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
You can use another DVD that are not protected but you will need to copy you have the product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:
I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:
c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
The dependency service or group could not startAny ideas?
You may need to temporarily disable your security software (antivirus).
-
The application was able to start (msvcp100.dll and atl100.dll not found)
I recently to get this error when opening in 2012 of LabView. I get two different error messages. The first said "the application failed to start because MSVCP100.» DLL was not found. Re-installing this application may fix the problem. "The other message says the same thing, but it's ATL100. DLL is not found.
I think that these files are part of the C run-time engine, but I don't know what I have to install to solve this problem.
Hello boochbrain,
I think you are right that these files are part of a runtime engine; specifically, the C++ runtime library. Relocation of these libraries could certainly mitigate these errors you see.
Here is a link to free download pages of the different versions of this software on the Microsoft Web site: http://www.microsoft.com/en-us/download/search.aspx?q=visual+c%2b%2b
I would like to know how it works!
-
Unknown connection status: dependency service or group was able to start
I started getting this error a few days ago, and I've tried several different Web site solutions
Replace the nlasvc.dll, as it was suggested that this had become corrupt. No solution.
Reset the TCP/IP stack
I ran sfc/SCANNOW in the administrator command prompt and it did not work.
I tried this, then in Windows started normally and start mode without network safe.
All to nothing does not.I don't have the Trend Micro Antivirus software installed.
Initially I had Panda, but at random that no longer works, so I then installed Kaspersky.
Everything worked fine for a while now, I have this problem, which is different from the other problem I had with Panda.
I tried to uninstall Kaspersky, and still no internet connection is available.Any additional help / advide, greatly appreciated.
Hi KarthiK TP
Thank you for your response. Unfortunately, it came too late, and I'm done to restore factory settings.
This solves the problem.Just to let you know, the step where we had problems is this awareness network (NLA) location. I was getting an error message whenever I tried this step.
That this step did not work, I wouldn't have been able to run all analyses of the viruses online, as I had no internet access.
In any case, I have Windows 7, if all goes well, it is more stable.
Thank you
JustineRMD
Maybe you are looking for
-
not the most up-to-date firefox
Firefox has seemed to have downgraded, every time that I update I get a message that it is not up-to-date. I can tell just by looking whether there is an older version or at least appears to be one.
-
All the details are below
-
Satellite A110 - 225 FN key does not work
Hey,. For some reason, I cannot adjust the brightness on my screen with the button FN and F6 or F7. It worked a few months ago, but no longer works. The FN key works, I get a green light when I press it. In addition, the combination of F1 - F5 are wo
-
Mouse, fingerprint and photo scanner fail after updating to the latest version of Windows 7
Since the last update of Windows 7, my wireless mouse, fingerprint reader and webcam all failed to exploit. Please advise?
-
Anyone who has used Google Talk yet? It's pretty good
I've used them all the (Qik, Tango, Skype etc etc) ang Google Talk works best, as long as the receiver is connected to Gmail on Google Chrome. The lag is virtually free. It works really well. Talked to my kids with her while I was in the hospital. We