the computer hangs at "preparing security options.

Similar Questions

• The computer hangs during the analysis of Microsoft Security Essentials. Error checking: 0x0000007f

  Hello.

  My computer - windows 7 x 64 SP1 - is now fallen down several times all by performing a full scan of the system with Microsoft Security Essentials. This is the last event:

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 28/02/2016 13:20:17
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: GAMUT
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007a (0xffffffffc0000185, 0x000000010495a880, 0xfffff6fc500110e8, 0xfffff8a00221da3c). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022816-17986-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      636121
     
     
      System
      RANGE
     
   
   
      0x0000007A (0xffffffffc0000185, 0x000000010495a880, 0xfffff6fc500110e8, 0xfffff8a00221da3c)
      C:\Windows\MEMORY. DMP
      022816-17986-01
   
  

  You can access the minidump here: https://www.dropbox.com/s/shogzx1tvdqh904/022816-17986-01.dmp?dl=0

  Can you help me? I don't know how to parse this file to understand what the problem is.

  Thank you!

  92 KB in bad sectors.

  You should check this number against the future reports. It will not reduce, but if it increases, you need to back up on external media and replace the disk.

  Cleaning of unused 161 entries index $SII of file 0x9.

  Cleaning of unused 161 entries index $SDH of file 0x9.

  Cleaning of 161 unused security descriptors.

  It is a problem less than bad sectors. If you get these errors, you must test the drive using the drive manufacturers test utility.

  Model Hitachi HTS543232A7A384 ATA Device

  IBM - Hitachi Drive Fitness Test 4.16

  http://www.MajorGeeks.com/files/details/ibm_hitachi_drive_fitness_test.html

• "Core security check failed" and the computer hang when I plug the USB mouse

  Hello

  Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.

  Here is the link to the single minidump file, I managed to download (with other permissions issues):
  https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161

  Let me know if there is anything you need. Thank you.

  Hello

  The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .

  This bug check indicates that the kernel has detected a critical data structure corruption.

  Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}

  Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).

  Cannot load the image NMgamingms.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for NMgamingms.sys
  ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
  Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )

  ^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.

  Kind regards

  Patrick

• Prepare Security Options (Message)

  Using Windows 7 Ultimate, the message "preparing for Security Options" appears frequently in big letters on my screen.    When it occurs, the performance of my system becomes severely degraded; and Internet access and smart phone via the port connectivity USB is disabled. That this message means; and what system process or service the product?  Thank you.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. Since when are you facing this problem?

  I suggest you to try the steps below and check if it helps.

  Method 1: Restore the system to the earlier date when the computer was working fine.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/fixing-a-problem-using-system-restore

  Method 2: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting the boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• The computer hangs when it is idling

  I am currently running Windows 7 and the wheneve the computer is idle, it crashes. He did after minutes 20 minutes walking in slow motion now its crashing at much longer intervals. I called the computer manufacturing and it turns out that the power options are managed by Windows and Acer ePower management. The Acer program was crash Windows after 20 minutes of walking in slow motion, so I put options to never, and don't do anything. Now its taking a lot more time to the accident but its still crashing when it is idling.

  Hello

  Since the system is again doing the below and check with the methods given in the resolution of problems
  Posted above. If those who do not help I would back up any data off the computer and return the
  System back to the specifications of the factory (out of the box state) to see if the errors stop. Don't forget to contact
  the seller and the manufacturer of the replacement system and/or warranty claim. Even if you are able to
  the problems that should be documented in case there is further down in the problems of the road.
  Also don't forget do you more they will claim that it is something that you did.

  =================================

  You should have two main antivirus on the computer much less operating. Even the leftovers
  a 2nd antivirus can cause strange problems. Please run the McAfee removal tool and I would like to uninstall
  Norton 360 and run the Norton removal tool as well. Keep the MSE and the following recommendations.

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The computer hangs after installing an update from McAfee.

  When McAfee performs an update on my computer, sometimes it takes turn off computer and do a reboot before they take effect.  Well, here's where the problems start.  When the computer turns back the cursor will not work, I have no way of online and even less off the computer.  I had to manually shut down the computer and restart with no luck there, too.  I had to resort to a restoration of systems even get the computer to work.  McAfee came with MSN I use and there has been no touble until last month of December.  Any help would be greatly appreciated.  I have dial to connect.
  Thank you very much!

  Original title: McAfee update

  Personally, I would recommend dumping McAfee and using a more reliable program such as Microsoft Security Essentials.  Except that if, you should contact McAfee and see why it creates so many problems for you.

• The computer hangs when you access network resources

  I have this problem with a couple of computers at work.  Here's the question:

  Computer does not display the network icon in the system tray.  When you try to access everything which concerns internet, nothing works.  IE Page not found errors, etc.  When I go to control panel > network connections, my computer freezes and I have to close the Task Manager Control Panel to continue.   My computer will also freeze/hang up when I try to use another application that requires an internet connection.

  Not help not to restart normally.  The only way I could fix is by turning it off for a while, and turning back on later.  But even if it does not work 50% of the time.  Restarting over and over again does nothing; the computer still plays the same, no network icon / freezing when you access network resources.  Once he decides to however works, the computer has internet/network connectivity and no problems until what it is off again.

  I tried all the drivers out there for my network card and reformatted 3 times is not a virus/spyware.  The I'm having a problem with the current computer is one day having no application other than Windows Update, Microsoft Office, Java, Flash and Adobe reader installed.  They are all Dell computers, some are of the Vostro desktops, while some are older of the Inspiron.  Questions computers are running Windows XP SP3.

  Any help would be appreciated!

  Hello

  I suggest you to send your request in the below link that this forum is best suited for your question.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps!

• The computer hangs after installing the latest updates

  I installed the latest windows updates.  Restarting my computer later, since hanging / freezing for half a second every 2-3 seconds.  I notice it more while trying to move the mouse or by watching a video (someone who speaks seems to stutter on about every 5th Word).  The computer clock has also been slowing.  He gets about 10-12 minutes behind before he catches upward.  When I look at the Task Manager, I do not take a lot of cpu.  Restarting the computer didn't help.  I've never had this problem before.  Any suggestions?

  Often by rebooting the computer solves an immediate problem.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• The computer hangs when resumed from hibernation

  Original title: my Dell Studio laptop has been extended in mood when arrested, on start windows hangs at «Windows resumes...» "how I reslove this issue?

  My Dell laptop Studio 1537, Vista Home Premium, was closed down in sleep hibernation oe.  When I try to restart windows crashes to the screen «Windows resumes...» ».  How to reslove this problem?

  Issue resloved by calling Smart Solutions from Dell 1-877-409-3272... Looks like you need start the computer, and then start pressing the F8 key until it brings Safe Mode, then let normal retart...  It worked for me...

  Hello

  1. were you able to get the problem solved?

  2 did you a recent software or changes to the material on the computer?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  See also:

  A Windows Vista-based computer stops responding when you resume the computer after hibernation

  http://support.Microsoft.com/kb/928135

  Hope this helps and provide us more information if you need more assistance.

• The computer hangs when connecting - if the workstation service is enabled.

  Original title: the computer crashes with workstation active service.

  I'm currently under Windows 7 Home Premium.

  I struggled to the login screen where you choose your user name and it says welcome, but nothing happens. Otherwise, my cursor will come back, but I can't do and ctrl-alt-del does not work either.

  I did safe mode, disabled services and isolated the problem to the workstation microsoft service. I understand that this workstation is essential for some components, such as connecting to a network drive, or a network printer.

  Now I have to work with workstation service disabled, and it's very inconvenient for my work. Is there a way around it?

  Thanks in advance.

  Hello

  Were there any changes or updates made on the computer before the show?

  Method 1:

  I suggest you run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  See also:

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/?kbid=890830#FAQ

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  See also:

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700

• The computer hangs after reboot cold.

  I just bought a HP Officejet AIO 6310xi. After several tests the OEM package will install not (installation failure). From the Web site and out of the CD/DVD included.

  I let MS-Vista install drivers and at least the printer works fine until reboot. Then the system freezes upward. Once I have turned the printer off and restart again the computer starts no prob. I have 6300 drivers and suspect that the drivers are up-to-date and incompatible with MS Vista. My computer is only a year old and during the inspection of the hub USB the draw appears in the settings (below 500 mha).

  The cable is less than 9 feet long. I have enough computer resources including backbone RAM and HD space.

  Is there anyway that I can get Vista drivers for this printer only without going through an arduous process for a long time?

  Any advice will be appreciated.

  It seems that the USB driver are to blame. But after I re-installed the new drivers of hub USB the computer always freezes the re-boot. It is not the most recent, I have found yet. The bios does not seem to be a problem because it is a Dec 2006 re - build. I guess it's a matter of waiting until the USB hub drivers are updated.

• The computer hangs at the screen Toshiba Leading Innovation

  Hi all

  My Toshiba Satellite P300 has suddenly stopped working. I was burning a music disc and the computer froze, tried to exit the program using the Manager of tasks successfully. I rebooted the laptop to refresh all before trying to burn again. the computer rebooted and hung to the inovation driving, Toshiba screen at the base of the screen it says press F2 to enter setup, press F12 to access the selection multiboot menu.

  By pressing one of theses buttons does nothing, I also tried to enter the recovery now the 0 key, and C key with the disc, but still nothing happens.

  Anyone with any ideas please, I don't have problems or signs of problems until this happened.

  Concerning
  Adam

  I had similar problem on my old A200. After removing the HARD drive, I was able to enter the BIOS settings.
  I replaced the HARD drive with a new one and now it works perfectly.

  Try to do the same thing. Remove the HARD disk, restart the laptop, just to see if you will be able to enter the BIOS.

• The computer hangs during the communication via a serial port

  I developed a code in LabVIEW 2011 to connect with the XY stage. It's actually two steps mounted perpendicularly. The installer of the system is that a (made by the same manufacturer as the stadium) gamepad is connected to the USB port on the computer if a USB to Serial converter. A step is daisy chanied to the controller and the other stage Garland at the first stage.

  To our application had to continually check the status and position of the steps X and Y. Because the joystick also returns responses when a request is sent to all devices, I need to send applications individually; for example. one request per order per device, making it a total of 4 orders. It takes care of the error returned by the controller. The problem, however, is that after a while the freezing of the program or the computer stops and restarts. It is located about 13 minutes (on average) after the start of the program. It also happens even when no command is sent to the devices. I put 50 ms delay before each send two commands (position and status) by device. Basically, the application waits for 50ms before sending two commands for X stage and the receipt of the response and when everything is done with X stage, he expects another 50 ms to do the same for step Y. Should this procedure goes on until the application is stopped. But as I said, there is a problem. Now, I guess the problem is that serial port buffer overflows. He chose to increase the delay time, but if it works to solve the problem, then I have no choice!

  I would appreciate any thoughts and comments!

  After a lot of time to experiment, I am convinced that the issue was with adapter Profilic.

• the computer hangs when playing games

  Some games I play keep shut off my computer. Someone knows why. I have windows vista home premium edition. Computer laptop dell inspiron 1525. Thank you

  Make sure that the computer is not overheating.  Also make sure you have the minimum requirements.

  Do you get any error codes?

• The computer hangs when it

  How stop the constant crashing from the windows of microsoft 01/04/09 download;
  If left without a job for more than 10 minutes, the pc crashes.

  Lic. ramirez,
  Do you receive messages or stop error codes when you restart your computer?
  Run the following restore tool:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.