The computer hangs when resumed from hibernation

Original title: my Dell Studio laptop has been extended in mood when arrested, on start windows hangs at «Windows resumes...» "how I reslove this issue?

My Dell laptop Studio 1537, Vista Home Premium, was closed down in sleep hibernation oe.  When I try to restart windows crashes to the screen «Windows resumes...» ».  How to reslove this problem?

Issue resloved by calling Smart Solutions from Dell 1-877-409-3272... Looks like you need start the computer, and then start pressing the F8 key until it brings Safe Mode, then let normal retart...  It worked for me...

Hello

1. were you able to get the problem solved?

2 did you a recent software or changes to the material on the computer?

I suggest you to go through the steps mentioned in the link and the Coachman.

How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

http://support.Microsoft.com/kb/950686

See also:

A Windows Vista-based computer stops responding when you resume the computer after hibernation

http://support.Microsoft.com/kb/928135

Hope this helps and provide us more information if you need more assistance.

Tags: Windows

Similar Questions

  • The computer hangs after resume from hibernation

    I bought a gateway in 2007 with Vista Home Premium. Great hibernation worked until 7 months after a windows update (I forget which). Now, when I resumed from hibernation, it restarts and comes up with the screen asking me if I want windows to start normally or in safe mode, etc. Any ideas of what could be the cause? Also now, after I try to bring it from being asleep, the screen is black and the computer does nothing. I have to then it reboot. Thank you.

    Hello Mlhargrave,

    Thank you for posting.  I found the solution to the problem of you in a Thread here on this site.

    We found that sometimes the BCD file may have problems.

    You can try this to fix the BCD file.

    1. run CMD. EXE as administrator

    2. run the following command: bcdedit - enum all

    Search for "Summary of Hibernate" in the output of the command above (example below):

    Out of the hibernation

    ---------------------

    identifier {3d8d3081-33ac-11dc-9a41-806e6f6e6963}

    Device partition = C:

    path \Windows\system32\winresume.exe

    Windows Vista (TM) Enterprise (recovered)

    inherit {resumeloadersettings}

    FILEDEVICE partition = C:

    FilePath \hiberfil.sys

    PAE Yes

    debugoptionenabled No.

    3. Once you have found, copy the value of the identifier (in this example - {3d8d3081-33ac-11dc-9a41-806e6f6e6963})

    4. run the following command: bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit

    5. test of hibernation.

    Please let me know if this helps you.

    Zack

    Microsoft Answers Support Engineer

  • White screen when resume from hibernation when the graph is active (DM4)

    I configured and purchased a HP DM4t with 512MB ATI Mobility Radeon (TM) HD 5450 switchable graphicst.  My problem is that when the laptop goes to sleep (for example when I close the lid), it will sleep for a while (I think his suffering at 6 p.m.), after which she'll take back and hibernate itself (hybrid sleep option).  I like this feature because it allows to save battery power, however, when I try to resume from hibernation when the ATI Radeon graphics card is active, all I get is a black screen.  I can connect using the fingerprint reader, (I hear Windows making the connected to the carillon), but I don't see anything on my screen.  If I do this same scenario using the Intel graphics card, I will not have this problem.

    I called HP tech support and their solution was to disable hybrid sleep feature.  I was not satisfied with this solution, because it does not save the battery of the laptop must sleep for a long time.  My solution is to disable auto graphics card change, and I just go to the ATI Radeon manually if necessary.  The problem with my solution is that it forces me to remember to turn off the discrete graphics when I'm actually (I tend to forget).

    Is there a solution to this problem that will allow me to use the gfx ATI card AND the hybrid auto sleep function?

    I was finally able to update ATI graphics driver on my laptop.  This seems to have solved my out of the hibernation problem.  The version of the driver that I'm on is 8.741.1.1000 with a date of version of 21/06/2010.

  • The computer hangs when you access network resources

    I have this problem with a couple of computers at work.  Here's the question:

    Computer does not display the network icon in the system tray.  When you try to access everything which concerns internet, nothing works.  IE Page not found errors, etc.  When I go to control panel > network connections, my computer freezes and I have to close the Task Manager Control Panel to continue.   My computer will also freeze/hang up when I try to use another application that requires an internet connection.

    Not help not to restart normally.  The only way I could fix is by turning it off for a while, and turning back on later.  But even if it does not work 50% of the time.  Restarting over and over again does nothing; the computer still plays the same, no network icon / freezing when you access network resources.  Once he decides to however works, the computer has internet/network connectivity and no problems until what it is off again.

    I tried all the drivers out there for my network card and reformatted 3 times is not a virus/spyware.  The I'm having a problem with the current computer is one day having no application other than Windows Update, Microsoft Office, Java, Flash and Adobe reader installed.  They are all Dell computers, some are of the Vostro desktops, while some are older of the Inspiron.  Questions computers are running Windows XP SP3.

    Any help would be appreciated!

    Hello

    I suggest you to send your request in the below link that this forum is best suited for your question.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

    I hope this helps!

  • The computer hangs when it

    How stop the constant crashing from the windows of microsoft 01/04/09 download;
    If left without a job for more than 10 minutes, the pc crashes.

    Lic. ramirez,
    Do you receive messages or stop error codes when you restart your computer?
    Run the following restore tool:

      1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
      2. In the System Restore dialog box, click on choose a different restore point and then click Next.
      3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
      4. Click Finish.

      The System Restore tool

      If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

      To restore the operating system to an earlier point in time, follow these steps:

      The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Core security check failed" and the computer hang when I plug the USB mouse

    Hello

    Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.

    Here is the link to the single minidump file, I managed to download (with other permissions issues):
    https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161

    Let me know if there is anything you need. Thank you.

    Hello

    The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .

    This bug check indicates that the kernel has detected a critical data structure corruption.

    Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}

    Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).

    Cannot load the image NMgamingms.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for NMgamingms.sys
    ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
    Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )

    ^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.

    Kind regards

    Patrick

  • Manufacturing recovery disks when the computer hangs when burning the DVD the first time

    I bought a new desktop computer HP Desktop Core I-7.  When I first connected, I started to burn the recovery disks.  The problem is, the first burned disc and then the computer locked up before burning DVD 2 and 3 and had to be restarted.  Now, I can't complete the game of recovery disks.

    The good news is that I have used the first disc to access the recovery partition on the hard disk to rebuild everything, but now I did put a good recovery.  Can I fix?  Or do I have to hope that my drive will never block?  Can I save the partition of subsequent restoration of a hard disk crash?

    Memorex DVD + R media was bad.  New media staring upward.

  • Computer do not normally sleep wake up and the computer hang when external USB devices are connected

    Hello

    I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

    1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

    It's the same thing when I tried to connect my iTouch 2nd generation.

    This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

    2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

    I was wondering if you have solutions to this problem, as well.

    Thank you.

    Original title: new Windows 7 problem

    Ok.. I'll try again...

    The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

    I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

    It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

    The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

  • The computer hangs when it is idling

    I am currently running Windows 7 and the wheneve the computer is idle, it crashes. He did after minutes 20 minutes walking in slow motion now its crashing at much longer intervals. I called the computer manufacturing and it turns out that the power options are managed by Windows and Acer ePower management. The Acer program was crash Windows after 20 minutes of walking in slow motion, so I put options to never, and don't do anything. Now its taking a lot more time to the accident but its still crashing when it is idling.

    Hello

    Since the system is again doing the below and check with the methods given in the resolution of problems
    Posted above. If those who do not help I would back up any data off the computer and return the
    System back to the specifications of the factory (out of the box state) to see if the errors stop. Don't forget to contact
    the seller and the manufacturer of the replacement system and/or warranty claim. Even if you are able to
    the problems that should be documented in case there is further down in the problems of the road.
    Also don't forget do you more they will claim that it is something that you did.

    =================================

    You should have two main antivirus on the computer much less operating. Even the leftovers
    a 2nd antivirus can cause strange problems. Please run the McAfee removal tool and I would like to uninstall
    Norton 360 and run the Norton removal tool as well. Keep the MSE and the following recommendations.

    McAfee removal tool
    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    Norton Removal Tool
    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

    List of tools to clean/uninstall anti-malware programs
    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

    =================================

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 5.x and 4.8 x

    Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • the computer hangs when playing games

    Some games I play keep shut off my computer. Someone knows why. I have windows vista home premium edition. Computer laptop dell inspiron 1525. Thank you

    Make sure that the computer is not overheating.  Also make sure you have the minimum requirements.

    Do you get any error codes?

  • The computer hangs when connecting - if the workstation service is enabled.

    Original title: the computer crashes with workstation active service.

    I'm currently under Windows 7 Home Premium.

    I struggled to the login screen where you choose your user name and it says welcome, but nothing happens. Otherwise, my cursor will come back, but I can't do and ctrl-alt-del does not work either.

    I did safe mode, disabled services and isolated the problem to the workstation microsoft service. I understand that this workstation is essential for some components, such as connecting to a network drive, or a network printer.

    Now I have to work with workstation service disabled, and it's very inconvenient for my work. Is there a way around it?

    Thanks in advance.

    Hello

    Were there any changes or updates made on the computer before the show?

    Method 1:

    I suggest you run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    See also:

    The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

    http://support.Microsoft.com/?kbid=890830#FAQ

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2:

    I suggest to create a new user account and check if the problem persists.

    Create a user profile.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

    Reference:

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    See also:

    Windows Vista and Windows 7 black screen on computer unlock

    http://support.Microsoft.com/kb/2431700

  • The computer hangs when you use the DVD player

    Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.

    I updated the DVD drive device driver; still crashes.

    I have a Dell Optiplex GX 280

    Windows XP SP3

    DVD is a teac dvd + rw dv-w58e


  • The computer hangs when copying the data on the hard drive

    * Problem *:

    My computer freezes whenever I have transfer large amounts_ of the data on the disc from my computer. * It doesn't have this problem with my C drive *.

    First detected this problem while I was transferring some data in LAN. This problem occurs even when I copy data to my C drive to the D drive.

    Action taken:

    -Performed a full scan of my computer, found some viruses, but the problem persists
    -Do you have a check disk via Windows, as well as the TuneUp utility, no problem.

    Data sheet:
    OS: Windows 7 Professional 32-bit
    Processor: Intel Core 2 Duo t7200 @ 2.00GHz
    RAM: 1 GB DDR2 - SDRAM
    Hard drive: TOSHIBA MK1234GSX ATA Device(120GB)
    No partitions: 2

    Hello

    It of difficult to say what might be wrong here but if the question appears only using the second partition, then I recommend to check the State of the HARD drive.
    I use a very good freeware tool called Drive Fitness Test.
    Use google to download this software.

    It creates a boot disk that allows you to test the drive HARD and of course the two partitions.
    If the error would be detected, then it means that the HARD drive failure could be the reason for this

  • My browser has been hijacked by blinkiland. The computer hangs when connecting?

    When Ipil on my password, get a dark blue glowingscreen. 64-bit Toshiba satellite s870 got in safe mode but it turns off the network connection, so can not sweep

    Run most or all of the scanners listed. And once from time to time, start a new search.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    Get a good virus scanner and keep it up-to-date.
    You can start here;

    http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

    http://Windows.Microsoft.com/en-us/Windows/getting-started-with-security-essentials

  • My vista computer hangs when I right click on the screen and scroll again.

    My vista computer hangs when I right click on the screen and scroll again.  I guess it's a problem with the windows Explorer.  I ran virus and malware scan and also led the sfc.  I always get the same result.  If anyone has faced this problem and knows the Fox please help

    It could be a problem with the shell extensions.
    Check out these links to see if they might be able to help:

    Make a right-click is slow or weird behavior caused by context menus managers

    and

    ShellExView - Shell Extension Manager for Windows

Maybe you are looking for

  • iPad is no longer able to charge after upgrade to iOS 9.3.1

    After the upgrade to 9.3.1 my iPad to Air is cooler when connected to any third-party charger or the external battery Pack. Connect the iPad, "load" signs chime sounds, and it starts to load for a brief second before the iPad gives the error message

  • Satellite C55 - A - 1 H 9 - output jack seems to be detached from the motherboard

    Hello I had problems with sound the last days. I have to switch the headphone jack to a position where they work perfectly, but they work well in all other devices without it. I tried with other listeners and the problem is the same, so it seems to b

  • 160 GB HARD DRIVE

  • MM turns on after several attempts

    Hi people out there. About 3 weeks ago I brought my Mac Mini at a support centre official that I can get my card fixed logic (logic + glitching integrated graphics card). After paying 500 to replace the whole logic board, I now encountered another pr

  • Stylus active Version A02 a winner

    Received today my stylus version A02. I think the 3rd times the charm and we finally have a winner. No clicks hovering and without waiting forever for the table to recognize the stylus. No disconnects for long periods of time no more. Time will tell.