The computer hangs when you access network resources
I have this problem with a couple of computers at work. Here's the question:
Computer does not display the network icon in the system tray. When you try to access everything which concerns internet, nothing works. IE Page not found errors, etc. When I go to control panel > network connections, my computer freezes and I have to close the Task Manager Control Panel to continue. My computer will also freeze/hang up when I try to use another application that requires an internet connection.
Not help not to restart normally. The only way I could fix is by turning it off for a while, and turning back on later. But even if it does not work 50% of the time. Restarting over and over again does nothing; the computer still plays the same, no network icon / freezing when you access network resources. Once he decides to however works, the computer has internet/network connectivity and no problems until what it is off again.
I tried all the drivers out there for my network card and reformatted 3 times is not a virus/spyware. The I'm having a problem with the current computer is one day having no application other than Windows Update, Microsoft Office, Java, Flash and Adobe reader installed. They are all Dell computers, some are of the Vostro desktops, while some are older of the Inspiron. Questions computers are running Windows XP SP3.
Any help would be appreciated!
Hello
I suggest you to send your request in the below link that this forum is best suited for your question.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
I hope this helps!
Tags: Windows
Similar Questions
-
Computer hangs when you access YouTube by using any browser
Original title:
I have a Glow movies blog and for this blog, I still need to find videos on youtube, but all day 2 or 3 times it happens that my vista for free a copy due to stream youtube, I've updated my video drivers for Dell 1545, as well as the flash upgrade, but still the result is that even give please help solve this problem. This issue with all the IE, FIREFOX, CHROME.
Thanks in advance
Hello
1. are you aware of any changes made to the computer, before the show?
Method 1:
Put your computer in a clean boot and check again.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Follow these steps.
a. go to a website with Flash.
b. right-click on flash content and uncheck the enable hardware acceleration.
Method 3:
Uninstall Adobe flash player and then reinstall it.
Uninstall Flash Player | Windows
http://kb2.Adobe.com/CPS/141/tn_14157.html
Adobe Flash Player 11.1.102.55
http://get.Adobe.com/flashplayer/
It will be useful.
-
The computer hangs when you use the DVD player
Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.
I updated the DVD drive device driver; still crashes.
I have a Dell Optiplex GX 280
Windows XP SP3
DVD is a teac dvd + rw dv-w58e
-
Computer hangs when you try to watch live TV through windows media centre__
Computer hangs when you try to watch live TV via windows media Center
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 3081
More information about the problem:
BCCode: a
BCP1: FFFFFA600C193FF8
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8000233499E
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini112509-01.dmp
C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Hi Eddie Hunt
Welcome to the Microsoft Answers Forum!
I suggest you try this method and check if it is helpful
Method 1:
Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to run check and clean boot if you have the problem.
i. Click Start, type msconfig in the search box and press ENTER.
II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
III. in the general tab, click Selective startup.
IV. under Selective startup, clear the check box load startup items.
v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
VI. click OK.
VII. When you are prompted, click on restart.
VIII. after the computer starts, check if the problem is resolved.
If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
i. Click Start, type msconfig.exe in the start search box and press ENTER.
II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
III. on the general tab, click the Normal startup option and then click OK.
IV. When you are prompted to restart the computer, click on restart.
Method 2:
Install the latest codec package and check if that helps, link below will help you with the same:
Method 3:
Update the graphics card. Steps to update the graphics card:
i. click on start, type devmgmt.msc and then on enter.
II. develop the graphics card and right click on the sub element and click on update driver.
Link for reference: problems with watching TV on your computer
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
During these months, we were faced with an error "" error when loading XML Document saw.dll./answers/saw.selections.xml?fmapId=RRxCfQ. "The answer was: ' when you access analytical dashboards OBIEE.
It is a global problem, and users cannot access any dashboard in OBIEE analytics.
We used weblogicPlugin 1.1 to configure the reverse proxy for our 64-bit using IIS 7.5 weblogic server. WebLogic Server Version: 10.3.6.0. We see the error "resolveRequest: application ' / analytics/saw.dll/answers/saw.selections.xml' has not been sent." Found OR '?', or ';' in URI "in the IIS Proxy log.
This question is regardless of the browser and get to each broser we tested. Users should click on the error message loading XML Web page pop for about 20 times to see the dashboard.
No idea how to solve this problem?
By Oracle Support suggestion, I installed Oracle HTTP server (OHS) and the problem is solved. For now, the problem is solved but SITEMINDER SSO and Siebel IFRAMES should be tested with OSH being the web server now.
-
Original title: Windows Explorer has stopped working
My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:
http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=
Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.
Any suggestion would be greatly appreciated pedro147
None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.
Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.
Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.
The current version of PowerDesk Pro is 8.5.
You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes. This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.
I would start with the PowerDesk ZIP shell extension (I already know about this one).
It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):
Download ShellExView here to see what Explorer extensions you have loaded:
http://www.NirSoft.NET/utils/shexview.html
ShellExView does not install anything on your computer, simply of runs and displays.
After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.
Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.
Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.
You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
For example, you could Google something like:
Explorer XP crashing (you must fill in the name of add your suspect on.) See what kind of search results hits you get and are looking for solutions or situations that sound like yours.
Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.
The result of the change is immediate and no reboot is necessary. Test your failure condition. If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.
Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.
Disable them one at a time until your right click on do not generate an error, then restart and test again. You have disabled the last extension would be suspicious. You can then start to reactivate other extensions to zero on the extensions that are causing your accident
If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.
If you find the offending extension that's the problem, please let us know what it is that I can add to my list.
-
How stop the constant crashing from the windows of microsoft 01/04/09 download;
If left without a job for more than 10 minutes, the pc crashes.Lic. ramirez,
Do you receive messages or stop error codes when you restart your computer?
Run the following restore tool:- Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
- In the System Restore dialog box, click on choose a different restore point and then click Next.
- In the list of restore points, click a restore point created before you started having the problem, and then click Next.
- Click Finish.
The System Restore tool
If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
To restore the operating system to an earlier point in time, follow these steps:
The computer restarts and system files and settings are back to the State they were in when the restore point was created.
Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
"Core security check failed" and the computer hang when I plug the USB mouse
Hello
Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.
Here is the link to the single minidump file, I managed to download (with other permissions issues):
https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161Let me know if there is anything you need. Thank you.
Hello
The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .
This bug check indicates that the kernel has detected a critical data structure corruption.
Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}
Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).
Cannot load the image NMgamingms.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for NMgamingms.sys
ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.
Kind regards
Patrick
-
The computer restarts when you try to stop.
When I try to shut down my computer, it automatically performs a reboot, forcing me to manually shut down the computer with power butter. In addition, the computer sometimes restarts automatically if left idle for too long.
Hello
Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
power off.Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html------------------------------
Check with this utility, just in case there is a situation of blue screen.
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - free------------------------------
Also this, so you can see the probable bluescreens. (You can or may be able to)
see them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on machine? Be one you have
EVER had on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
The computer hangs when resumed from hibernation
Original title: my Dell Studio laptop has been extended in mood when arrested, on start windows hangs at «Windows resumes...» "how I reslove this issue?
My Dell laptop Studio 1537, Vista Home Premium, was closed down in sleep hibernation oe. When I try to restart windows crashes to the screen «Windows resumes...» ». How to reslove this problem?
Issue resloved by calling Smart Solutions from Dell 1-877-409-3272... Looks like you need start the computer, and then start pressing the F8 key until it brings Safe Mode, then let normal retart... It worked for me...
Hello
1. were you able to get the problem solved?
2 did you a recent software or changes to the material on the computer?
I suggest you to go through the steps mentioned in the link and the Coachman.
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
See also:
A Windows Vista-based computer stops responding when you resume the computer after hibernation
http://support.Microsoft.com/kb/928135
Hope this helps and provide us more information if you need more assistance.
-
The computer hangs when it is idling
I am currently running Windows 7 and the wheneve the computer is idle, it crashes. He did after minutes 20 minutes walking in slow motion now its crashing at much longer intervals. I called the computer manufacturing and it turns out that the power options are managed by Windows and Acer ePower management. The Acer program was crash Windows after 20 minutes of walking in slow motion, so I put options to never, and don't do anything. Now its taking a lot more time to the accident but its still crashing when it is idling.
Hello
Since the system is again doing the below and check with the methods given in the resolution of problems
Posted above. If those who do not help I would back up any data off the computer and return the
System back to the specifications of the factory (out of the box state) to see if the errors stop. Don't forget to contact
the seller and the manufacturer of the replacement system and/or warranty claim. Even if you are able to
the problems that should be documented in case there is further down in the problems of the road.
Also don't forget do you more they will claim that it is something that you did.=================================
You should have two main antivirus on the computer much less operating. Even the leftovers
a 2nd antivirus can cause strange problems. Please run the McAfee removal tool and I would like to uninstall
Norton 360 and run the Norton removal tool as well. Keep the MSE and the following recommendations.McAfee removal tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507Norton Removal Tool
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_USList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/=================================
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The computer hangs when copying the data on the hard drive
* Problem *:
My computer freezes whenever I have transfer large amounts_ of the data on the disc from my computer. * It doesn't have this problem with my C drive *.
First detected this problem while I was transferring some data in LAN. This problem occurs even when I copy data to my C drive to the D drive.
Action taken:
-Performed a full scan of my computer, found some viruses, but the problem persists
-Do you have a check disk via Windows, as well as the TuneUp utility, no problem.Data sheet:
OS: Windows 7 Professional 32-bit
Processor: Intel Core 2 Duo t7200 @ 2.00GHz
RAM: 1 GB DDR2 - SDRAM
Hard drive: TOSHIBA MK1234GSX ATA Device(120GB)
No partitions: 2Hello
It of difficult to say what might be wrong here but if the question appears only using the second partition, then I recommend to check the State of the HARD drive.
I use a very good freeware tool called Drive Fitness Test.
Use google to download this software.It creates a boot disk that allows you to test the drive HARD and of course the two partitions.
If the error would be detected, then it means that the HARD drive failure could be the reason for this -
Why the computer quit when you listen to music?
When listening to music, such as Sirius radio, with other activities on the computer, he will play only for a short period and then he will leave until the mouse is moved. I tried to find an arrangement, but havn't had any luck so far.
Hi Chiniwayne,
I will definitely help you with this.
1. what version of Windows is installed on the computer?
2. what web browser do you use to listen to Sirius radio?
3. you get any error message?
4 have have there been recent changes made on the computer before the show?
I suggest you to refer to the advice given by Srinivas KR on January 22, 2012 and check if it helps.
If anything in my post is not clear or if you have other questions, do not hesitate to let us know. We will be happy to help you.
Thank you.
-
Manufacturing recovery disks when the computer hangs when burning the DVD the first time
I bought a new desktop computer HP Desktop Core I-7. When I first connected, I started to burn the recovery disks. The problem is, the first burned disc and then the computer locked up before burning DVD 2 and 3 and had to be restarted. Now, I can't complete the game of recovery disks.
The good news is that I have used the first disc to access the recovery partition on the hard disk to rebuild everything, but now I did put a good recovery. Can I fix? Or do I have to hope that my drive will never block? Can I save the partition of subsequent restoration of a hard disk crash?
Memorex DVD + R media was bad. New media staring upward.
-
The computer hangs when connecting - if the workstation service is enabled.
Original title: the computer crashes with workstation active service.
I'm currently under Windows 7 Home Premium.
I struggled to the login screen where you choose your user name and it says welcome, but nothing happens. Otherwise, my cursor will come back, but I can't do and ctrl-alt-del does not work either.
I did safe mode, disabled services and isolated the problem to the workstation microsoft service. I understand that this workstation is essential for some components, such as connecting to a network drive, or a network printer.
Now I have to work with workstation service disabled, and it's very inconvenient for my work. Is there a way around it?
Thanks in advance.
Hello
Were there any changes or updates made on the computer before the show?
Method 1:
I suggest you run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
See also:
The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP
http://support.Microsoft.com/?kbid=890830#FAQ
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2:
I suggest to create a new user account and check if the problem persists.
Create a user profile.
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.
Reference:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
See also:
Windows Vista and Windows 7 black screen on computer unlock
Maybe you are looking for
-
A t540p copy of the data to another
Hi, what is the best way to move all of my current t540p to the new? Both have the same OS, win7. I thought backup on external USB drive and then restore? Thank you
-
What to wear to the front using a 3 g Modem?
Hello I am currently using modem Huawei Mobile connect - 3G to connect to the internet someone knows how to portforward using this? It's starhub if you must know. Apparently, when I type ipconfig/gateway as 0.0.0.0, it shows by default Thank you.
-
Driver.cab cannot copy on the re-installation of windows xp... help
well hoping that someone can help because I'm lost... two weeks that ag has a virus that struck my notebook bad, then last night, that I decided re - install windows xp using the cd, everything has started big until the computer failed to copy some f
-
Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean? I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed an
-
Hi allI need help to get my computer back to normal. My laptop has been infected with the virus Vista Internet Security 2010, but I removed it, NOW none of my apps (Yahoo Messenger, trash, other folders, SYSTEM, all file icons restore,) work, I manag