The computer-wide shift and does not

Similar Questions

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• attempts to send the message that is too long the Outbox - it freezes and does not allow me to delete

  Outbox is trying to send a message too long - can not remove it it freezes and does not

  Windows Mail. Whenever I try to go to the Outbox to erase the messages it freezes the computer.  I even went to tools and checked 'work offline' and it seems to ignore it.

  Follow this article help & Support:
  http://support.Microsoft.com/kb/941090

  t-4-2

• all of the icons has changed and does not properly

  I went to upload a picture, when I looked for my vivitar icon, he was gone, I found it in search folders, when I tried to open it the computer pop up said to choose a program to open it, I chose moviemaker... big mistake, all THE icons became a filmmaker, none would so I told moviemaker to open with Explorer,... .bigger error. now all THE icons are icon explore showinig and none is open, I tried to cut something and no wants it computer download me continually explore,... when I said o.k. HUGE mistake... the computer went crazy and I had to stop by holdong the button down... I want just all my icons of old rite there are places ... any suggestions? If you know, please e mail me at [email protected]. Thank you

  problem solved, my son-in-law told me to go to control panel, security, system protection, System Restore, click Reset options more, choose a date BEFORE the problem started and run it via the restore feature... back to normal... all glory will Jesus, used tell you today, "Jesus, please come into my heart Please forgive me for sining against you and show me the way, I should live "... then you'll be restored too"

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• By double clicking on the topic he removes and does not open

  Hi all

  I am facing a strange problem frustrating both of our controlled source help projects that no one else on my team knows. This seems to be a problem with my computer/installation of RoboHelp.

  Today, I went into our projects to help for the first time in a few days, and when I double click on any topic, it automatically checked off VSS, but it did not open. It extracts also in the CSS, template file (master page) and all the graphic files associated with the subject.

  Normally, when I double-click a topic, the topic opens, and it only checks it off VSS if I start typing in the topic. It does not check the CSS, master page file, or graphic files, unless I have make changes to these files.

  Like I said, nobody else knows this problem. We all have the same versions of the system (see below). It seems that me, and it goes both of our aid projects. To my knowledge, I didn't do anything to my computer or its application settings to cause this. Someone knows a problem like this? If so, what can I do about it? Any other ideas?

  My system information:

  RoboHelp HTML version 8.0.2.208

  Output type: WebHelp

  Source control: Microsoft Visual SourceSafe 8.0.50727.42

  Thanks in advance for any help,

  Lisa

  Hi Lisa

  Nothing will change if you change the option of selection Auto Editor?

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 times now - $24.95! Adobe Certified RoboHelp HTML Training SorcererStone blog RoboHelp EBooks

• Restart the computer when a program does not

  Hello

  I'm using Labview 2011 and 2014.

  I put windows to start my program when the computer is turned on. The VI is set so that the program runs at the launch. Things have been works well for many ON / OFF sequences of the computer. But the last time when, coming back to the screen, I realized that the program did not work (as if she was waiting for the user based on the white arrow). I pressed the white arrow and the program worked fine. I started the computer and everything worked too. This program is supposed to run far enough away from work where I don't have access to the computer (not able to check if things are okay..)

  My question is: how could I make the computer do a sequence of Stop and Start if my program stops or is not running?

  Thank you.

  User

  Given that it looks like your application simply stopped normally, I would add in an Exec System call to reset your computer.  Is the command that you want to restart the computer

  shutdown /r /t 0
  

• My download CS6 manages at the end and fill the bar but hangs and does not end?

  Any help on the above would be welcome. I am operating an iMac with OS X Maverick 10.9 and the download starts and runs OK, gets 3.78 3.78 GB GB but then does not end and hangs at this point?

  I downloaded successfully, now after connecting the router to the iMac with an Ethernet cable, so even if it was able to fully download on more than once for some reason any it would not complete and open the disk image to install.

  Thanks for your help.

  Concerning

  Mark

• I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

  Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

  By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

  We are working to solve this with the creation of our Tablet UI.

• Replaced the HDD with SSD and does not start?

  I replaced the original HARD drive in my Latitude E5500 with a new 240 GB SSD. I can't the computer to boot. Blue lights above the blink of keyboard on and out and nothing else happens. Is there a sequence of keys that need to be pushed? I have the boot CD in the DVD player, but can't even get it to work.

  Is there a place to find written instructions?

  Thank you.

  Hi ran61a,

  Click here to find out what you say the flashing lights.

• Hello! I have FF 10.0.1 and me lived an annoying bug for a while. Every time I open a PDF file, the scroll function on my computer becomes invalid and does not return until the PDF is closed.

  My mouse scroll function crashes whenever a pdf file is opened.

  I searched online and that you have not found a solution. I would appreciate help!

  Hi cjromano,

  Have you checked to see if your PDF is updated? I would take a glance files PDF view in Firefox. There is a lot of information in there, and it lists some different add-ons PDF. I would like to try both to see if it is localized to a single.

  Hope this helps!

• Vista - when the computer is shut down, continue to get the same updates offered and does not

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  Everytime I go I turn off I get this update. It happened now 57 times in the last month. It seems that the downlaod fails when checking for details. Is it possible that I can remove the update total.

  * original title - Codes *.

  How to hide updates or restore the hidden in Windows Vista updates
  http://www.itechtalk.com/thread5013.html

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Your problem can be solved or answered if you post on the forum of Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Sansa fuze doesn't recognize the storage capacity all and does not load?

  My 8 gb sansa Fuze only recognizes about 400 MB and will no more. It is just over a year and has worked well before. Nor my sansa fuze or clip will hold most any kind of a charge. The clip is about 2 years old. I recently bought a new computer and I am running windows xp. The two sansas stopped working after I tried to load them into my new pc. What could have caused this and how can I solve this problem? Thank you.

  You can have a file in there that stifles the Sansa, wielding Media update. If it gets stuck, hold the power button and keep it for 20 seconds after the screen turns off.

  Your update is probably spent the USB mode to automatic detection, which will be a PSG connection if it detects Windows 10 or 11 on your computer - but XP comes with WMP 9 unless you have updated, that would send Auto Detect Meteorological Service of the Canada in the event where it is not working properly.

  I suggest reloading the firmware, just in case. Search in the firmware upgrade instructions near the top of the first page of the forum force MSC for the upgrade.

  Then choose a mode - MTP or MSC, depending on what you are used to - rather than the automatic detection function.

  And if it remains stuck, while you are using MSC run Error Correction. Right-click on the drive, properties, tools, error checking. He might find a problem file.

• I can't change the video resolution on youtube. When I try to change it, he goes to 240 p and the screen is black and does not play the vid.

  Hello, I have this problem.
  Recently, I have noticed that when I try to change the quality of the video by default 360 p to whatever, the quality will increase to 240 p and the video wont run. There will be a black screen.
  I tried to reset the browser and it has not fixed my problem.
  I tried the same video in internet explore and quality change worked normally.

  How would I fix this?

  Thank you

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".