The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

Hello

It seems that the blackberry is not more.

Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

Tags: Windows

Similar Questions

  • Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

    Hi all

    I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

    Can anyone help me please with this.

    Thank you

    Zia

    What is the local firewall on your computer?

  • Unable to connect to the host server: a connection attempt failed because

    Hi all

    I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

    I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

    Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

    to answer.  Do you want to retry?

    My ESX server hosts have static IP addresses.

    I've seen a few similar posts on this issue, but their solutions have not worked for me.

    Best regards

    Nathan

    I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

    -KjB

    VMware vExpert

  • Error "Failed to connect to the remote computer" VMware View Client

    Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand.  I have already tried Googling every possible thing, but still came short on what to do.

    Currently I have:

    Server ESXi 3.5

    -vCenter Server

    -Connection to the server

    -3 swimming pools installed individual office xp host w/view agents

    At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network.  The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded.  When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.

    I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa.  I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above.  I tried to disable the firewall on everything, but it still doesn't seem to work.  Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.

    When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.

    You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

  • A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

    I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

    Hello

    It depends on how the computers are connected and their intellectual property regime.

    They are on the same network (e.g., connected to the same router)?

    Through the Internet? Something else?

    http://support.Microsoft.com/kb/300546/en-us

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

    I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

    You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

    (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
    (2) save the remote assistance request computers
    (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
    RCTICKET = 65538,1,192.168.1.33:3389 «»
    with the public IP address from whatismyip.com or elsewhere - should be something like this:
    RCTICKET = 65538,1,74.125.47.147:3389 «»
    (4) save the file of RcBuddy.MsRcIncident 'new '.
    (5) double click it to connect to the computer needing help
    (6) cross your fingers and hope it works!

    I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

    -Computers Acorp
    www.ACoRP.net

  • HUAWEI ce0682 modem. Error: "the connection was terminated by the remote computer.

    Original title:

    HUAWEI ce0682 modem

    I can not connect my internet modem HUAWEI ce0682 to windows 8. Help! I need to download a different driver? If so, how should I do this? After installing and trying to connect the message is "the connection was interrupted by the remote computer.

    Hi Chelsea,

    What happens when you connect to the modem? Windows detects the modem?

    Usually, these modems wireless should have a built-in application or driver that is installed automatically when connected to a computer. Please see HUAWEI ce0682 manual to learn more about the configuration of the modem and its requirements.

    You can visit the manufacturer's Web site to search for the drivers:

    http://consumer.Huawei.com/en/support/downloads/index.htm

    Connect your home network to the Internet

    Please post with the State of the question.

  • Remote Desktop disconnected. The remote computer disconnected the session because of an error in the licensing protocol. Try to connect to the computer again.

    I understand there is a patch to 'fix' it, but I don't know how to access.  Can anyone help?   Thank you.

    Here is an article on this problem with a proposed solution - although it seems a bit risky.  I would create a point system restore and backup of the registry before trying. http://kjctech.net/2009/06/12/the-remote-computer-disconnected-the-session-because-of-an-error/.  The same answer is given by Microsoft here: http://support.microsoft.com/?kbid=187614.

    Here is an another artidle which includes essentially the same correction (although I didn't check closely to see if they were the same): http://www.techbuzz.in/how-to-fix-the-remote-computer-disconnected-the-session-because-of-an-error-in-the-licensing-protocol-in-windows-vista.php.

    The thing is, I can't find a clear answer, if this applies between two ordinary computers or between a server and a computer.  I hope that the solution works in both cases.  If this isn't the case, you can still use the system restore to go back to the old situation and we can try to find another solution.

    I hope this helps.  Keep me posted.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

    Hello

    I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

    I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

    I have disabled the firewall on the PC and MAC

    I tried over ethernet and direct connections

    When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

    When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

    He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

    After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

    Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

    I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

    LOGS *.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

    2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

    2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

    2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

    Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

  • Your computer cannot connect to the remote computer

    Hello

    OT:

    Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

    I implement the remote desktop session based on Win Server R2 2012.

    I create a free sign for certificate certificate and also install the certificate to the client computer.

    But when I click on any application it shows me error.

    Hello

    You may need to ask the question on the TechNet forums. Please post the question here:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    Kind regards

  • The Client computer could not connect to the remote computer

    Hello

    Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

    They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

    They say:

    "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

    "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

    Hello

    You can read the following article and install the patch available to see if contributing to the issue.

    You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

    I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

    Windows XP IT Pro Forums.

  • "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

    Hello

    I received the following error message

    "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

    This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

    Thanks in advance

    Hello
     
    Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
     
    To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
     
    This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
    1. Click Start, type regedit and press to enter.
    2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
    3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
    4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
    5 restart the computer for changes to take effect. Restarting the computer will create new keys.
     
    NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
     
    Visit this link for more information:
    http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
     
    Important: Incorrectly editing the registry can cause serious problems on the computer.
    Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
     
    Try the steps and check the result.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All computers on the domain work for RDP is only now a single computer.

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All other computers on the work of field for RDP is only now a single computer.

    This post on the forum of MSFT Services Office to remotely help...

    http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  • Remote Desktop cannot connect to the remote computer

    Hi all

    I'm having a problem on my server running Windows Server 2008 R2.

    I can not can not on the remote server by using remote desktop (mstsc).

    Here is the error I get when connecting:

    Remote Desktop cannot connect to the remote computer to one of the following reasons:
    (1) remote access to the server is not enabled
    (2) the remote computer is disabled
    (3) the remote computer is not available on the network

    Make sure that the remote computer is on and connected to the network, and remote access is enabled.

    I tried to restart the services, but nothing helped.

    I even restarted the server, which did not help.

    Also, I can ping the server without any problem.

    Kindly help. !

    Hello

    Search logs events on the Terminal Server and the Local user's PC

    Try disabling the firewall - may have to be reconfigured.

    I suggest that repost you the question in the TechNet Windows Server forum for assistance.

    TechNet

  • This computer can't connect to the remote computer

    I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

    • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
    • I checked the services and that they perform a remote procedure call (RPC)
    • Restarted the server several times.

    I can remote into other servers of this machine if I log in locally.

    Please advise,

    Michael McDaniel

    301-763-1160 off.

    Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

Maybe you are looking for

  • Stuck flashing question mark.

    I had a few circle of problems of death. I've formatted it to el Capitan. I had problems in formatting as well. But when I did a clean install to external hard drive, I was able to format correctly without taking a lot of time. But still sometimes th

  • QuickTime player converted the video AVCHD in BDMV file and now I can't see it

    My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

  • With Macs DO NOT use symbols in your wifi passwords!

    It's more of a discussion of assistance than a question. I was recently informed by a wifi from my internet provider technician not to use symbols in my wifi passwords where I connected my Mac products. He said, in his experience, that's never a good

  • I can't access my hotmail account.

    Yesterday, I tried to connect to my hotmail as usual account (acct is * address email is removed from the privacy *). However, he disliked the password that I used, although I have not changed my password in the month. For this reason, Microsoft has

  • What is the best windows for web programmers?

    I need your advice, which is the best windows for web programmers?