The connection to the remote host has been lost.

Similar Questions

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• "The relationship of trust between the Client and the domain controller has been lost."

  I had a client PC connected to a DC running 2003 SBServer.

  It was this error when he tried to connect with its domain account.

  "The relationship of trust between the Client and the domain controller has been lost."

  I had to connect as Administrator local and leave/re-join the domain with a different machine name.
  How can I fix the side Server?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below and validate the request.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope this information is useful.

• VMware Fusion 3.0.1 update error (the connection to the update server has been lost)

  Hello

  I tried to update my vmware fusion many times, but I get this error message. I'm sure that is not because of my connection because I was running OSX update at the same time and I was able to update my OS x without any problems. VMware actually stopped the 3.0.1 update because they are a lot of bugs or there is something else, what happens to me laptop. BTW, I use a 2.8 Ghz MBP.

  See you soon

  Instead of updating through the Fusion program, try to download the package install .dmg and upgrading in this way.  Go to http://www.vmware.com/download/fusion , scroll down and get information, then download the full version (415 MB) or the Light version (170 MB, less AV and some tools).   The light version can download additional items later if necessary (I hope).

• Ability of blackBerry Smartphones to synchronize the network time has been lost

  Hello world

  Until very recently, I had the possibility to synchronize the time with the BlackBerry network and the mobile network (3 Australia). Both worked fine as I Express put an incorrect time, and then synced with both of them.

  This now seems to have stopped as his network saying time is not available.

  I tried turn this option off and turned on, tried a battery pull, searched everywhere I see etc.

  Is there anything else that could affect the ability to synchronize the time with the network

  Thank you

  Paul

  Interesting. I went just manually the phone 2 g (because I was doing a long call in a 3G area low and I didn't want to cut out), and when I turned it to 3G and 2G was back at the time of the network.

  Paul

• CS4 'the connection to the remote host was lost.

  Suddenly, I get the error message (CS4) when I try to connect to remote hosts: "the connection to the remote host has been lost. Click Refresh to reconnect. "It is impossible to connect to a remote host.

  This happens for all my sites on remote servers in different countries, so it must be a problem of DW. Please advice.

  Have you tried to use passive mode:

  Definition of site > advanced > click on the passive FTP box and see if it works.

  --

  Nadia

  Adobe Community Expert: Dreamweaver

  ---------------------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  --------------------------------------------------------------------------

  Web Design & development

  http://www.perrelink.com.au

  http://Twitter.com/nadiap

• Diagnostics network ping to the remote host, but has not received a response

  I'm trying to figure out if there is a problem with just my laptop not wanting to connect to a local free WiFi, so any help is appreciated. He worked two days ago only to stop abruptly last night.

  Windows Network Diagnostics comes back with the error message "Can not contact www.microsoft.com (65.55.12.249)" and "diagnostic network ping to the remote host, but has not received a response.

  The only repair option it evokes is ' reset NIC 'wireless network connection ' '.

  I can always connect to WiFi using my iPhone, and even a connected laptop computer work Companion. Yet once, if this can be fixed on my end, any help would be appreciated.

  Hello BrenJones,

  Thanks for posting back. DNS servers are controlled by your ISP. I communicate with your Internet service provider and confirm that you have the good DNS for your network.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Existing connection had to be closed by the remote host

  Need help with this error
  I have a dev and a uat environment.
  I have a small form that I use as a method to call a web service. Essentially, the form contains a web service URL text box.
  If I call the shape on the dev and pointer to the service web dev, it works.
  If I use the form on uat and point the service web uat it works.
  If I use the form on UAT and call the web service on dev, it works.
  However, if I use the form on the dev and point the web service uat I get this error:

  In the Application Server error ' / '. An existing connection was to be closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Net.Sockets.SocketException: An existing connection was to be closed by the remote host

  Source error:

  The source code that generated this unhandled exception can only be shown when compiled in debug mode. To do this, follow one of the below steps, then request the URL: 1. Add a "Debug = true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" %> or: (2) add the following section to the configuration file of your application:                 Note that this second technique, all the files in an application to be compiled in debug mode. The first technique will make only this file to be compiled in debug mode. Important: Running applications in debug mode causes a memory/performance load. You must ensure that an application has debugging disabled before deploying to the production scenario.

  Stack trace:

  [(0 x 2746) SocketException: an existing connection was to be closed by the remote host] System.Net.Sockets.Socket.Receive (Byte [] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) + 73 System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) 131 [IOException: unable to read data from the transport connection: an existing connection was to be closed by the remote host.] System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 294 System.Net.PooledStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 26 System.Net.Connection.SyncRead (request of HttpWebRequest, Boolean userRetrievedStream, Boolean probeRead) + 297 [WebException: the underlying connection was closed: an unexpected error occurred during the reception.] System.Net.HttpWebRequest.GetResponse () + 5399741 _Default.btnTestUpload_Click (Object sender, EventArgs e) + 532 System.Web.UI.WebControls.Button.OnClick (EventArgs e) 111 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) + 110 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent (String eventArgument) + 10 System.Web.UI.Page.RaisePostBackEvent (IPostBackEventHandler sourceControl, String eventArgument) + 13 System.Web.UI.Page.RaisePostBackEvent (NameValueCollection postData) + 36 System.Web.UI.Page.ProcessRequestMain (includeStagesBeforeAsyncPoint, Boolean, Boolean includeStagesAfterAsyncPoint) 1565

  Version information: Microsoft .NET Framework Version: 2.0.50727.4234; ASP.NET Version: 2.0.50727.4223

  Any ideas?

  Hello

  I suggest you for this post in the appropriate section of the form of MSDN

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• An existing connection to be closed by the remote host.

  Since last week, I can't keep a connection to the server of vatsim or acars for virtual pilots micro flight simulator will for more than five minutes. the error message is that an existing connection had to be closed by the remote host

  not an expert of anymeans and all the answers I got on the net are well above my paygrade.

  Hi dva8377,

  Here are two additional methods you can try.

  1: Restart the computer by using a clean boot of the method

   

  When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus software and system programs that may interfere with the game. When you perform a clean restart procedure, you prevent these programs from starting automatically.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2: Bypass the router

   

  If you connect to the Internet using a router, there may be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem. Remember that this test will only check that the router is configured correctly. If the game connects to the Internet without problem when you bypass the router, plug the router immediately and contact the manufacturer of the router or your ISP for help configure the router correctly.

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  For more information, see: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  Hi dewthisnow,

  The information office for remote access must be in the security log.

  For more information, see:

  To disable remote desktop

  To view the logs in Event Viewer, see:

  Using the event viewer        

  Procedure to view and manage event logs in Event Viewer in Windows XP

• OfficeJet 6700 Premium: scan of the computer is that is no longer enabled network connection has been lost

  "scan of the computer is no longer active network connection has been lost" appears every 10 minutes or so on my "[redacted] Compaq 8200 Elite Minitour Convertible" is connected to "6700 Premium e-All-in-one Officejet - [redacted] H711n.

  I have already run the 'Locator solutions and update".  He finds nothing.

  I don't know what else to do.

  Please provide the following information if anyone can help including:

  The printer model - done

  Complete and detailed problem description-

  Operating system on the computer (including service pack revision) - done

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again

• I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

  I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

  Hi Jdburton,

  Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Concerning

  Megha Rawat

• Windows 8 on Vmware discovers 'the connection to the remote computer has ended. "

  Hello world

  I have problems connecting with VMware view
  I installed windows 7 and tested fine. But Windows8 x 64 is not allowed.

  The virtual machine is available on the server of the view state. pls see attached snapshot. When I try to connect to via the customer discovers my session disconnects after a few seconds with a warning "the end of the connection to the remote computer.

  When I check the console vcenter process, it seems that the user connects with no problems. But customer does not display anything and disconnects.

  what I've done so far:
  -Tried both RDP and PcOIP connections
  -Removed and reinstalled the client
  -Remove the agent from the view and reinstall client
  -Server view rebooted
  -There is no open Firewall. I'm on the same subnet
  -increases the size of memory for video display.
  -everything restarted.
  -Check the dns settings, seems to be ok.
  -removed from the field and added.

  Infra:
  ESX 5.1.0 799733
  See 5.1.2
  View customer: 5.2.1 build 937772
  VMware-viewcomposer - 3.0.0 - 691993

  I search around forums but cannot find an excat answer to this question.
  Any help much appreciated. Thank you all

  The complete list of the supported operating systems see 5.1 Agent is shown on page 15 of the installation guide - http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf - see the section on operating systems supported for Agent view.

  You will find information on this forum of the people who got 8 windows work and to avoid the "black screen" "the connection to the remote computer has ended", but note that it is not taken in charge with Discover 5.1.x.

  Mark