[The content source < iehistory: a bunch of #s] are not accessible.
Hello:
I get a bunch of them in the observer of events as warnings. Not sure if I have problems because of them or not. Everything seems to work OK for me.
Here is a list:
#1:
The
Background: Windows Application, catalog creates Details: (HRESULT: 0x80004005) (0x80004005) #2: The
Background: Windows Application, catalog creates Details: (HRESULT: 0x80004005) (0x80004005) #3: The
Background: Windows Application, catalog creates Details: (HRESULT: 0x80004005) (0x80004005) #4: The
Background: Windows Application, catalog creates Details: The object was not found. (HRESULT: 0 X 80041201) (0 x 80041201) #5: The
Background: Windows Application, catalog creates Details: (HRESULT: 0x80004005) (0x80004005) #6: The
Background: Windows Application, catalog creates Details: (HRESULT: 0x80004005) (0x80004005) Some of the above are repeated 3-4 times. I noticed that the changes from 1000 to 500 in some of them. When you first start, these error messages appear. Not sure whether or not they are part of the problem. #1 The gatherer is unable to read the registry URL. Context: Application, catalog creates Details: (HRESULT: 0 x 0) (0x00000000) #2 The search service has detected data files corrupted in the index {id = 431}. The service tries to automatically correct this problem by rebuilding the index. Details: The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801) #3 The Windows Search Service is stopped because there is a problem with the indexer: the catalog is corrupted. Details: The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801) It was then rebuilt: Windows Windows (3524): the database engine has successfully completed recovery steps. Any ideas what to do? Or is it quite 'normal' during boot? Thank you, Rick Hello Are you facing any problems when working with programs? Note: The event logs that you have posted here refer to errors with the search Index in your computer. These are not fatal errors. However, they certainly point to the fact that some of the sites indexed on your computer are not accessible for the mechanism of research due to various errors. These errors should disappear once you have performed the following steps. Method 1: You can run the fixit from following link and check the issue: Difficulty of Windows Desktop Search when it hangs or no display of results http://support.Microsoft.com/mats/windows_search/ Method 2: You can try to rebuild the index to see if it works: Change advanced indexing options http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options Let us know if it helps! Tags: Windows I don't know what that means: "There is not enough disk space to left to the location of the cache... Thumbnails and previews are not generated or updated in cache on the disk. Please leave bridge and add more disk space on the volume of the cache or change the location of the cache in the Cache preferences. Then restart Bridge. » I deleted a whole bunch of photoshoots I had on my desktop, but how to make more space here? Erica Hi Ericacole What version of the bridge are you using and what is your OS? Please how much is left in your main hard drive. By default, the bridge cache is located at: -. C:\Users\Yourname\AppData\Roaming\Adobe\Bridge CC\Cache (AppData is a hidden folder) Note that cache bridge could be very large depending on your use of the product. Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS Concerning Assani Loads Options page but are not accessible. Small box (without text) appears in the middle of the page. Have you tried various installs Firefox (current edition of Foxstart). Tried to disable extensions. Win 10 64 operating system. Chrome is by default because it can not reset Firefox because of issue of Options. You may have a corrupted file xulstore.json . the boot selection failed because a required device is not accessible Hello I give my 15 years old nephew an old laptop so I am trying to run a system recovery and restore it to its original state factory. As soon as I clicked on Recovery Manager > System Recovery > restore to their original factory condition, I get a screen with this message Windows Boot Manager: Windows could not start. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc and restart your computer. (don't have) 2. choose your language settings, and then click "next". 3. click on "Repair your computer." If you do not have this disc contact the Adminitrator's manufacturer or a computer in your system. Status: Oxc0000225 Info: The boot selection failed because a required device is not accessible. Is there a way to get around this. I would get to it as soon as possible, but I want to wipe all my info beforehand. Thank you! Karen try to perform the recovery by using the partition. boot f11 and recovery manager must take over. If not, or if the process does not finish successfully, perform a large hard drive. If the test successfully you will need to order a copy of your HP recovery disk. as an alternative, you can create a new admin account and simply delete your existing account after. hope this helps "0xc000000f the boot selection failed because a required device is not accessible." "0xc000000f the boot selection failed because a required device is not accessible" I'm not able to use the installation disc that my CD/DVD drive has failed. Is there a way to create a bootable via a USB disk and the PC started? Windows Vista. Hi Anand, The error "0xc000000f the boot selection failed because a required device is not accessible" is related to the error in the hard drive that is required to start. Steps to create a bootable USB stick with Windows 7 As the CD/DVD drive does not work, you can create a bootable USB drive using which you can repair this problem. Before you create the bootable USB key with Windows 7, you can download Windows 7 from the link provided below. http://www.microsoftstore.com/store/msusa/en_US/PDP/ProductID.253735200 Use the Windows 7 USB/DVD tool to create a USB bootable with Windows 7. Here is the link that will help you to create a bootable USB. WINDOWS 7 USB / DVD DOWNLOAD TOOL Steps to fix the problem with the error code After you create the bootable USB key with Windows 7 you can insert it in the boot of the computer, and then press F12 to go to the boot window priority and change the priority of Boot on USB. a. After you change Boot priority on USB that is usually at the last, the computer will boot using the USB and it will take you to the page where in the GUI (Graphical User Interface), it will display the install now option. b. here you must select fix you the computer from the bottom left. c. This will take you to the WINRE (Windows Recovery Environment) window that offers different options d to fix problems with Windows. e. in WINRE, select the option that reads the command prompt and type the following command. Chkdsk /f /r Note: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive. It will be useful. Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying: Windows could not start. A recent hardware or software change might be the cause. He told me to insert your windows installation disc (which I did not). He also says Status: 0xc000000f Info: The boot selection failed because a required device is not accessible. Whenever I try to boot normally, it wouldn't let me. Hello You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem. This link will help you... http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/ Checkurtech When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135 Startup Repair fails, the boot selection failed because a required device is not accessible. Hello all,. I have windows 7 Home premium 64-bit on dell PCs. I lost power then in the middle of the update to windows 10. Now, I'm stuck on the windows Boot Manager screen and the windows error recovery screen. When asked ¨launch startup repair, ¨I get then message ¨the boot selection failed because a required device is not accessible. ¨ When asked ¨start windows normally, ¨I get same selection boot error message. I have my disc to install windows 7 HP, but I can't get the pc able to read the disc. I tried the key windows and ¨r¨to get a prompt to read the disk, but it does not work. I tried the hard stop pressing the start for 10 sec button, but it does not restart the computer. I unplugged the computer in hopes that it would help restart, but this doesn´t work. I am stuck in windows boot manager purgatory - Help! Hello I would like to know some information about the problem so that we can help you better. What is the model number of your Dell computer? Thank you for details on the question and your efforts to resolve. I also know that the inconvenience that you are experiencing due to problem starting Windows. I will definitely help you. This problem may occur because of damaged or missing Windows startup files. This can also occur due to damaged MBR (Master Boot Record). I suggest you use the bootrec.exe tool and check if that helps. You can create the Windows 7 installation media using this link. I hope this information helps. Please let us know if you need more help. Thank you Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized. I downloaded the latest update of Adobe for RAW files. Advice gratefully received. You need Adobe raw camera 8.7 version. Unfortunately your software is earlier than the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG Converter to convert your raw files to the universal Raw format files and Adobe will be open in all versions of PSE (keep your originals as backups and for use in the software of the camera factory) Download Windows (.exe file) click here DNG Converter 8.7 Download Mac (.dmg file) click here DNG Converter 8.7 You can convert an entire folder of images raw with a single click. See this quick video tutorial: How to set the content on one layer at a time and not the whole picture - photoshop cs6 Hello I create something photo in photoshop cs6 and I have a mountain behind a layer that is visible and in total I have about 6 layers and when I try to change something on the 6 layer (therefore somehting like the saturation and hue) she change what is on the 5 layer, at the same time, so how can I do so I just adjust the content on the layer 6? Thank you mrredrunner100 PS thought that it might help https://drive.Google.com/file/d/0B1KO1zQcxYLWazZNRDh1Q3ZaMmc/edit?USP=sharing Hello... While on the adjustment layer, the properties panel displays a button that looks like at this: If you select the setting apply only on the layer below and the adjustment layer will look as follows. hope that helps. The content below Accordion widget doesn't move do not? I want to have the content below the Accordion widget to slide down when one of the panels is open. Right now, the Accordion widget behind the content slides when one of the panels is open. I have "Overlapping elements below" checked. From the Lynda.com site: " the Accordion Panel now includes the overlapping items below option. "When selected, content under the accordion panel moves down on the page like an accordion panel is opened/expanded." Thank you This seems like a typographical omission on Lynda.com blog. You must uncheck this option to move the content below accordion down when opening the Panel. Please check below excerpt from Muse Release Notes here: http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html See you soon,. Vikas If you right click on the bar at the top of the page in the browser, you can check and uncheck what bars appear. I accidentally disabled something there and now when I click I can't get any menu to double-check my menu on the right, State bars so that they are visible. Currently they are not visible, I have no way to move or change settings. OK, got it fixed, I kept fishing around this site and found an answer. Press the Alt key and the menu bar appear temporarily, long enough to restore the bar to be visible. Some of the reproduction of my CD - R recording, some are not. Some of my CD - R recording reading, some are not. For those who do not have the CD poster player (0 bytes space free, total size 0 bytes) I know that is not so much that I played against them in the past. What can I do about it? The numbers of space for music CDs are never correct, so don't worry about this. CD/DVD players need cleaning periodically due to the accumulation of dust, then invest in a kit cleanser little expensive and see if it does not help. Also, check the CD that doesn't play for scratches or dust and clean if necessary. I hope this helps. Good luck. File are not accessible by the system There is, I had restored my computer using suite recovery of my computer. I backup all before starting the process. After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder. I'm going to remove it and I get a message saying that the file is not accessible by the system. From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker. None of these methods was able to remove this darn folder. Now, I don't know what to do next. If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive. and it's something I don't want to do. So, I ask, what should I do next? Photo of properties of "folders". Hi ShoaJo, Error code 14, you can see the article mentioned and check. Explanation of error codes generated by Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123 I hope this helps. Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: Believe, otherwise, the 'Read only' attribute has nothing to do with 'read only' for folders in Windows XP. It actually refers to a custom folder. To change the access permissions, you must right-click on a folder, select 'Properties', then select the security"" tab. If you do not have a Security tab, it's either because you have XP Pro and 'Simple file sharing' enabled, or you have XP Home, and you are not an administrator mode without failure. The following items should enlighten you... "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7" "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP" The command "attrib" in a command window can be useful or, Alternatively, you can use the 'cacls' command in a command window, but it's ugly. HTH, the maintenance of compensation recommended message on a designjet 800 Hi I have a clients designjet 800 here which shows the recommended maintenance message! plotter has the latest firmware and Ive wiped the ony counters, gas station counter refuses to delete, that gas station was installed a year ago and white shock Satellite M40X-112 does not start correctly Hello I have a similar problem with my M40X-112. After pressing the power button, th sbutton turns blue, the fan startsrotation and after a few seconds, the fan stops and nothing happens (no starting, no noise, nothing).In one of the 30 tests I can s The updates that fail to install. For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decid I am a beginning programmer and have tried to solve my problem in the pursuit of learning. However, I have spent a bit of time on this one area and was wondering could someone help point me in the right direction. To prepare the ground, I have two Ra I need to convert WMV files (which were created using Cisco WebEx recording Editor tool) to the h.264 format. This tool of the registration editor is the only tool that can get stuff on the native format of recording (.wrf) WebEx to WebEx meetings reSimilar Questions
https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved
Please note: after troubleshooting, start the computer in normal mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
http://support.Microsoft.com/kb/949358
Refer to this article:
Use Bootrec.exe in the WINRE to resolve startup problems
https://support.Microsoft.com/en-us/KB/927392
Reference:
https://www.Microsoft.com/en-us/software-download/Windows7
<>http://support.Microsoft.com/kb/326549 >
<>http://support.Microsoft.com/kb/307874 > (XP Pro only)
JWMaybe you are looking for
