the control is not of the type expected by the function.

Similar Questions

• GetTableCellValue "the control is not of the type expected by the function.

  I hope you can help me to find out why GetTableCellvalue is a failure.
  I don't get "the control is not of the type expected by the function.
  int calPanelId = LoadPanel (PARENT, "gui_main.uir", CAL_PANEL);
  Point p;
  p.x = 1;
  p.y = 1;
  Double val = - 1.0;
  State int = - 1;
  status = GetTableCellVal (calPanelId, READY_TAB_TABLE, p, &val);)
  READY_TAB_TABLE is an array, it is apparent from the record of the uir:
  gui_main.h: #define READY_TAB_TABLE 2 / * type of control:
  table, the callback function: (none) * /.
  I'd appreciate any help you can give me.
  Thank you
  Randy

  OK, 1, 2 and 4 look ok to me, but maybe 3 either, so one last thing: If the table is in a tab of the Panel, you must use the handle Panel tab, for example,

  function (tabpanel_handle, TABPANEL_4_CONTROL_1,...)

  and GetPanelHandleFromTabPage for the tabpanel_handle...

• Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

  Original title: Parental control does not

  Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

  On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

  Hello

  Step 1: turn off UAC (User Account Control) and check the result

  See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• -Error ORA-00932: inconsistent data types: expected TANK got the NUMBER

  Here is my report query...
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND RFA_FLAG = (CASE :P1_JOB_CLASSIFICATION WHEN '0' THEN 'LSF'
                                    WHEN '1' THEN 'NON-LSF' 
                                    ELSE RFA_FLAG END)

  The column data type RFA_FLAG is NUMBER(*,0)... I'm view RSA and RSA - not the area of selection, but I get the error ORA-00932: inconsistent data types: expected TANK got the NUMBER >
  
  I have created a static LOV with LST display 0 return
  Display NON - RSA 1 return...
  
  Could any body please help me in truble shooting error? How to to convert the data type to number, I have no privileges to make changes to the table...

  Mark you my previous answer as correct? (MOST POINTS!  :))

• How can I do the quick filter Toolbar NOT search in type-I?

  Research during the strike makes it extremely slow search. I would prefer if it seeks ONLY when I hit enter and NOT while I type.

  https://support.Mozilla.org/en-us/KB/quick-filter-toolbar

  There is no way I know of to freeze the quick filter search until you press ENTER.
  It dynamically adjusts the list according to what has been entered, and how broad you are looking.

  TB built in functionality 'search Messages... " you wait for you to press on enter. You can search for a single file, or the parent folder and all its subfolders. It uses the same list of filter as the message filter criteria.
  "Edit - Find -"Find Messages... ', or
  Right-click any folder in the folders pane, and select 'search Messages... »

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• Function call to the C - Type not available library for one of the parameters in the Prototype of the function.

  Hello

  I do a work already done by others: implementation of a Wrapper to SQLite LabVIEW, I know how to do with .NET alas I would do that c, mainly for purposes of performance and my pointer poor knowledge is kinda make me stuck.

  Some information is kindly provided here:

  • http://www.SQLite.org
  • http://www.SQLite.org/cintro.html

  What I want to do is just to open a connection to an SQLite database (if not existing does not, the SQLite engine will create the embedded database and the corresponding file to save the data and everything). The function to perform the operation is indicated in the page below:

  • http://www.SQLite.org/c3ref/open.html

  It seems simple enough:

  int sqlite3_open(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
  int sqlite3_open16(
    const void *filename,   /* Database filename (UTF-16) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
  int sqlite3_open_v2(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb,         /* OUT: SQLite db handle */
    int flags,              /* Flags */
    const char *zVfs        /* Name of VFS module to use */
  );
  

  However, I'm struggling a bit on the following type:

  sqlite3 **ppDb          /* OUT: SQLite db handle */
  

  And I'm not really sure what type to use when calling this function of LabVIEW

  Any idea, I guess it's really easy, but I'm not really used to have a type which is I guess the DataInstance but as it is not clearly explicted in the C library function prototype interpreted LabVIEW (InstanceDataType is logical but not sure if) I'm not really sure what I show in the screenshot is valid or not.

  My VI seems to work like a charm, but am not sure if I'm doing something wrong.

  Another prototype that I have no idea on the appeal proper LabVIEW is the close function:

  • http://www.SQLite.org/c3ref/close.html

  I would like to get this straight, usually a parameter has a name, right? but seems not:

  int sqlite3_close(sqlite3*);
  int sqlite3_close_v2(sqlite3*);
  

  Similarly no idea about setting up for this one... must be regarded as the free forum like the one calling this function is... but I don't send any object?

  Really confusing...

  sqlite3*
  

  I might sound really stupid, but if someone could point me to a few tracks, I'd be really grateful for that.

  Thank you

  Ehouarn wrote:

  However, I'm struggling a bit on the following type:

  sqlite3 **ppDb          /* OUT: SQLite db handle */
  

  And I'm not really sure what type to use when calling this function of LabVIEW

  This parameter must be an integer of size pointer, passed by the pointer. No matter whether it was signed or not signed. The SQLite library will allocate memory for you, then put a pointer to this memory in full the pointer location as you go.

  Regarding the close function, you must pass the same integer pointer, but this time he passed by value (because it is referenced with a single *, not two). There is nothing wrong with the documentation by omitting the name of the parameter. For the application of a function prototype, the parameter name is without important, since everything you need to know is the type of data. How the service chooses to refer to this setting internally is irrelevant.

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• The volume control will not remain on the taskbar, XP

  The volume control will not remain on the taskbar, I open the control panel and sound to restore everytime I restart the computer. How to restore the registry file which told him to stay?

  Thank you, Larry.

  I found the Microsoft FixIt program and ran that she and that solved the same problem you described.

  Thank you very much!!!

  Ross

• One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  Well this problem started a week ago. When computer first starts or restarts (I did not open any program still!) I get this message,

  One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  I know this usually occurs with internet explore, but as I said I do not have anything yet open. I've activated all the active X controls in internet explore with no luck. I searched the web for active x forums and blocked the editor and followed all the instructions in the error message (most of them see enabling active x) but without success. I am an advanced user (15 years and more), but it has left speechless me. If I try to open "Services", I get the same error. When I opened my anti virus, it opens but it is just a blank page. I know that my anti virus is working well.  Also if I open internet explorer, I get a blank page, if I go to a website (enter it or go to my favorites) it works fine. I've deleted all the temp, historical, cookies etc. etc. (use CC Cleaner and other programs to clean) but if reopened once again it says white. If I use help and you want to see a help topic that it is said (may not display due to problems of congestion or network, check connection) but internet works fine. I know that I have not a virus (a lot of people in the forums think it) I scanned with Bitdefender, Eset Nod32, Super Anti Spyware pro, Malaware Anti Malawarebytes, Spybot, Stopzilla, etc. etc. and did not find a virus (in safe mode) there are many people on the web with the same problem (with the same and some with different programs). This problem seems to be random (does not affect a certain program) I tried for a week now and I'm stumped! Anybody have ideas that I heard yet?

  Thank you if you do!

  Hi Morksr2d2,

  As you mentioned that the problem reappears as soon as you run the anti-virus program, it seems that we found the cause of these error messages at startup.  I would like to recommend that you Uninstall the antivirus & check if the problem reappears. This should also allow you to make changes on the services tab in system configuration utility.

  Later, reinstall the antivirus program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you run Windows Explorer from a command line under Vista, control or not display the navigation pane

  I'm under Windows Explorer from a command line under Vista and 7. Under XP I could use the /n switch to control or not display the navigation pane. This doesn't seem to work on later operating systems. How is it possible?

  Hello

  How to change Windows Explorer icon to open a folder in Windows XP and Vista Diffierent - this shows the
  command line and that the switch should always work.
  http://www.watchingthenet.com/how-to-change-Windows-Explorer-icon-to-open-a-diffierent-folder-in-Windows-XP-and-Vista.html

  Command line switches to display items or folders when you open Windows Explorer
  http://www.mydigitallife.info/2009/02/07/command-line-switches-to-display-special-objects-or-folders-when-opening-Windows-Explorer/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 'Page' does not name a type with the given Code problem

  Hello

  I try the code on this page , but I'm getting 'Page' does not designate a type in the Test.hpp file with the following line

  private:

  Page * appPage;

  Container * mRootContainer;

  };

  What could be the solution for this problem?

  OK I solved this problem with the addition of bb::cascades with the page
  Please take a look at the following code

  private:

  BB::Cascades:page * appPage;

  BB::Cascades:container * mRootContainer;

  };

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• I own 13 element to Win and just got my Mac Book so I downloaded the Mac version of 13 items and trying my serial number, but get the message that this serial number is not valid (I type the exact Win serial number I have my account

  Hello

  I have 13 element to WIN and just got my MacBook so I downloaded the MAC version of 13 items and trying to allow my serial number, but the message that this serial number is not valid (I type the exact Win serial number I have my account on the Adobe website)

  Since version 13 is no longer marketed, I will assume that you are since long TIME 30 days return policy

  You'll have to buy version 14 for your Mac... or install a software emulation to then run your program Windows on a Mac