The control unit - until I get starts.

Gidday,.

* hope it's the right place in the message boards *.

I'm designing software in Labview for control device. Editing I design is used to test the buttons on a product.

The low-level commands are managed by a microcontroller that is round, press x or product removal position y.

I have drawn a few screws (attached) to generate high level for the microcontroller to process command strings.

Before that I build the main VI there are two phases. Manual control, where the operator can press the (Boolean) MISTLETOE and make something happen by sending the right order in the microcontroller. Phase II is a cycle where multiply orders will be sent in the order and repeated several cycles (serveral thousand times) ~ a process automated.

***

I would like to know if there is anything that I should know as I proceed with the creation of handmade VI, LabVIEW and the time of long durations (2 months at a time running and the data record).

Is there a problem with the help of screws custom several times.

The idea was to use the "stringfunctiongenerator" in a sequence and find only entered the need for local variables.

Finally, the microphone will return a command 'busy' or 'free' to let me know what happens and whether or not I can send a command.

I'm attacking the project in blocks. know how to draw coms series vi. plot data logging.iv and then putting them together.

Hi Kamian,

People leave labview running for years without problems. You, however, will definitely want to check for problems before you deploy a program memory. A slow memory leak will use the memory on the computer and possibly cause an accident. If you have the tool execution trace for labview installed (check tools-> profile-> execution Trace) you can do this automatically, otherwise just monitor memory that labVIEW uses in the Manager of tasks in a few weeks and see if it is on the rise. The biggest cause of the cause of the leaks memory is people don't close not references to objects. In addition, if you don't store data in a file fast enough you will use until your RAM fairly quickly.

Your design looks like it is on the right track. You might consider doing your 'Action' control a typedef and an Enum instead of a control of the chain. The typedef will make it easier to update your code and the Enum are easier to perform logic operation with.

Tags: NI Software

Similar Questions

  • compare the control unit when obtained from scriptures Sub

    Dear,

    I'm working on oracle apps R12, and I two business units when do two bills of different operating units and transfer to the GL, how do I compare journals it is for a specific operating unit in the database is there any ID in the database that I can compare different operating unit transactions that come from the sup to the GL book.


    Thanks in advance,

    Hello

    Ledger doesn't store information directly on the control unit which is normally captured at the transaction level.
    However, there is a table called GL_IMPORT_REFERENCES that keeps track of each worksheet that is passed from subsidiary ledgers to the General Ledger. This table has a column GL_SL_LINK_ID... This can be compared with a few tables over to reach the transaction source and pick up the reference of operating unit...

    (1) for the sheet, you want to know the GL_SL_LINK_ID of table GL_IMPORT_REFERENCES...
    (2) once GL_SL_LINK_ID is obtained, use the value in the XLA_AE_LINES table and collect the AE_HEADER_ID value...
    (3) once the AE_HEADER_ID value is obtained, use the value in the XLA_AE_HEADERS table and capture the value EVENT_ID...
    (4) once the event_ID value is obtained, you can check it with the ACCOUNTING_EVENT_ID of the base transaction... table column for accounts payable invoice it would be AP_INVOICE_DISTRIBUTIONS_ALL and for the payment of accounts payable AP_CHECKS_ALL... Similarly for other modules, the basic transaction tables would hold the reference... .Similarly each transaction table at the level of the subledger database allows to store the ORG_ID which is your value of operating unit...

    In addition, if your users provide a name for the JOURNAL by operating unit during the transfer of auxiliary accounting journal entries in the log book, you can identify by the same...

    Kind regards
    Ivruksha

  • When I boot up MY WEB SEARCH TOOLBAR comes up. I can't delete because it does not appear on the control panel how to get rid?

    This toolbar, not requested by me, happens to start upward with a block of Google search. It works on the screen, but not in the Bar area. They offer a removal solution by using the Control Panel Add/Remove, but is not listed. It does not search for it. How can I get rid of this pest?

    Hello

    You really don't want MyWebSearch toolbar as it has malware that are associated with him.

    M3PLUGIN. DLL, information
    http://www.bleepingcomputer.com/startups/m3plugin.dll-23933.html

    How to get rid of the Mywebsearch toolbar
    http://www.ehow.com/how_4780067_rid-MyWebSearch-toolbar.html

    Products Fun Web "My Web search" removal Instructions and help
    http://www.pchell.com/support/MyWebSearch.shtml

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to display the parameters of the control units

    Hello

    I have a simple request, associated with display units in controls.

    The procedure is a right-click on the control > select the display format > advanced editing mode. Because a field called string format, I give here the units related to the parameters. Now, I must enter "S2" in this area. How to give the value of the suffix.

    Please help me.

    Kind regards

    Girl S.

    After Sec enter \B2 in ' display \'-codes and switch back to the normal display.
    Ref: https://forums.ni.com/t5/LabVIEW-Idea-Exchange/Subscript-and-superscript-fonts/idc-p/920208/highligh...

  • SQL: fill the same value, until it gets another NOT NULL value

    It's my main table

    CREATE TABLE MAIN (EMPNO INTEGER, DATE OF EFF_DT);
    INS IN HAND VALUES(1,'2013-01-01');
    INS IN HAND VALUES(1,'2013-03-01');
    INS IN HAND VALUES(1,'2013-05-01');
    INS IN HAND VALUES(1,'2013-07-01');
    INS IN HAND VALUES(1,'2013-09-01');
    INS IN HAND VALUES(1,'2014-01-01');


    It's my table of choice

    CREATE TABLE LKP (EMPNO INTEGER, TYPE_CD VARCHAR (10), EFF_DT DATE);
    INS IN LKP VALUES(1,'A','2013-01-01');
    INS IN LKP VALUES(1,'B','2014-01-01');

    My query:

    SALT
    M.EMPNO AS MAIN_EMP,
    M.EFF_DT AS MAIN_DT,
    L.TYPE_CD
    HAND M LEFT JOIN LKP L ON M.EMPNO = L.EMPNO AND M.EFF_DT = L.EFF_DT

    Result:
    MAIN_EMP MAIN_DT TYPE_CD
    2013-01-01 1A
    1 01-03-2013?
    1 05-01-2013?
    1 01-07-2013?
    1 01-09-2013?
    2014-01-01 1, B

    Expected result: (I need to get the same value, until I have a new value of research)

    MAIN_EMP MAIN_DT TYPE_CD
    2013-01-01 1A
    2013-03-01 1A
    2013-05-01 1A
    2013-07-01 1A
    2013-09-01 1A
    2014-01-01 1, B

    Please help me in this regard.

    Concerning

    KVB

    RaminHashimzade wrote:

    For 11g (ignores null values)

    SELECT M.EMPNO AS MAIN_EMP,

    M.EFF_DT AS MAIN_DT,

    NVL (L.TYPE_CD, lag(L.TYPE_CD ignore nulls) over (partition by M.EMPNO of M.EFF_DT order)) TYPE_CD

    HAND M

    LEFT JOIN LKP L

    ON M.EMPNO = L.EMPNO

    AND M.EFF_DT = L.EFF_DT

    order by 2

    ----

    Ramin Hashimzade

    It's not only 11g, which is also 10g

  • Parameters of frame for the card in the studio of short to get started the application

    Hi all

    Can someone tell me what is the default framework setting for fields below when we installed short studio to do to request labor parameters, especially the map

    DF. MapViewer:?

    df.mapTileLayer?:

    df.mapViewer?:

    Due to changes in the configuration I don't see that the map to get started request please help solve the above problem.

    I m getting error below

    MapView service is not available, contact your system administrator.

    Hello.

    df.mapTileLayer: "elocation_mercator.world_map".

    df.mapViewer: "http://elocation.oracle.com/mapviewer/".

    and I think that you also asked:

    df.mapLocation: "elocation.oracle.com".

    Let me know if this helped you

    EBrauerP

  • When I open the control panal. I get an icon minamized on the bottom bar and can maximize the top open control panal

    you see what's happening the title

    It looks like the window opening off-screen.
     
    Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. File | Output and Windows will remember the size and location when you open it again.
     
  • Audio volume on the control unit?

    No idea how it's done?

    as far as I thought I have to import the system qnx audiomanager class and then call the function setOutputLevel from the nuber I want it to be but it doesn't seem to work

    PS: I'm under 10.0.9.388 gentle on my DevAlpha and compile using the 3.0.0 SDK

    Howdy!

    import the following:

    Import qnx.system.AudioManager;

    Import qnx.system.AudioOutput;

    in your block of code you want to add:

    AudioManager.audioManager.setOutputLevel (0,1, AudioOutput.SPEAKERS);

    The second argument can be null, and it will set some output is being used, but I like to be explicit.  Then, add the following to your bar - descriptor.xml:

    set_audio_volume

    I hope that helps!  Let me know how it works for you.

    See you soon!

    -grahamzibar

  • How can I fix missing files that I can't get to the control panel?

    How can I fix missing files that I can't get to the control panel. I get error "Windows cannot find 'C:\WINDOWS\system32\rundll32.exe'. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"when I go to the control panel and click on add or remove the problem, and I get a similar message when I go to something similar

    Hello Braxtonspangler,

    I'm assuming that you get this error when you try to access some or all of the files/folders.  If this is the case, please see the link below.  Please let us know status.

    Microsoft Answers:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Windows-cannot-find-cwindowssystem32rundll32exe/664c5b59-515C-472e-A872-a41f3e0562c1

    Thank you

  • On the start menu, the "Getting Started" application has no arrow to his right, his party!

    I'm using Windows 7 Home Basic 64 bit pre installed on my Sony VAIO. Whenever I go into the menu to start, the earlier application is still "Getting Started" and there always an arrow to its right. When I move the mouse on the "Getting Started", a submenu appears on the side still with applications like to experience Windows 7, customize Windows etc. After about 20 days (from the 1st day, I opened my new VAIO), the arrow is automatically spent.

    Can you please tell me why does this happen? All other applications as Word 2010 has its right arrow that shows me recently opened documents, but where is the arrow of "Getting Started" went? The last thing I do on my computer is the main application of Office Starter 2010 to open and install it.

    There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Also, if your files are hidden, check out the following article on how to display the:

    http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  • "Let's Get Started" upgrade to Windows 10, MB 2613,7

    N °

    Shit I don't WANT immediately. I have 7.1 Windows 64-bit and does not seek to update to 10 immediately I left working them the bugs out rather than be their Guinea pig.

    I can not install other updates (defender of the window, et al.) through Windows Update as the title is important on the Update window. When I check "all the updates available" it shows that I have updated 'important' (none are listed for 10) for windows defender and others, but when I select them and went back to the screen "install", it of "Let's Get Started" upgrade to Windows 10, MB 2613,7 and not pledging all other updates I just chose.

    Now I have (uninstalled) fact Kb3035583 option half a dozen times and it is NOT on my system more (that I can find) and was OK until 2 days ago (11 November) when I had to do the security updates monthly and a bunch of Office updates (including monthly scanning of malware). After that, I got the TITLE on my Windows 7.1 updates page saying, you guessed it, "Let's Get Started" upgrade to Windows 10, Mo 2613,7I did scans, newspapers turned on, and I can't find any article that mentions nothing other than the problem of Kb3035583 so I am confused.

    Please help me by removing the Windows 10 let's get Started option so I can continue to download updates for my current system.

    Thanks in advance.

    Hello

    Thanks for posting your query to the Microsoft forum.

    I appreciate your efforts to try to solve the problem and I will definitely help you with this.

    Please follow the steps in method 1 to method 3.

    Method 1: uninstall the update of Windows as follows:

    Remove the Windows Update KB3035583.

    If the problem persists, follow method 2.

    Method 2: Rename the GWXUXWorker.exe

    Complete the GWX.exe process using the Task Manager. Also rename the GWXUXWorker.exe and the GWX.exe to .old as the location of the directory suffix: -.

    Windows\System32\GWX, if get any problems by renaming may give permission to respective filesystem and then try renaming again. OR you can remove the folder from the directory.

    If the problem persists, follow method 3.

    Method 3: The registry key to stop notification : -.

    1. Press Windows + R keys on your keyboard to open the Run dialog box.
    2. In the Open field, type regedit.
    3. Click on OK.
    4. Click Yes on the user account control (if prompted).
    5. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Gwx
    6. A right click.
    7. Click on change.
    8. In the data value: on the ground, DWORD: 00000001.
    9. Click on OK.
    10. Output the registry editor.

    Important this method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

    ____________________

    Thank you best regards &,.

    Isha Soni

  • SCXI and USB 6210? Getting started...

    Hello

    I'm looking to get an online data collection system and had a few quick questions of SCXI signal conditioning high-performance...  First of all I have is 1 chassis SCXI-1000, SCXI-1121, SCXI 1180 and 1100 SCXI modules assorted.  I also have a few blocks of different endings, SCXI-1300 block and a 1320.

    (1) by section "what to start' in"the SCXI chassis user manual"everything only I need is hardware of SCXI chassis (in my case the SCXI-1000 chassis), a 120 VAC power chord and a computer.  However in the ' what you need to get started section "of the manual"Getting started with the SCXI"I need also a SCXI-1200 or"Hardware DAQ"module  So my question is this, can I set the SCXI-1000 chassis directly to my laptop without any additional hardware?  I feel, I need something else, but want to make sure...

    1 (b) assuming I need a material additional DAQ to start, I can use a NI USB 6210 somehow?  I checked the manuals and little is said about SCXI.

    (2) neither manual mentions a controller, but the SCXI Advisor shoot one.  They should say if all I do is collect data, not active control?

    Thank you

    Mike

    Mike,

    There are two options for you to get your SCXI system operational. You will need either an M series or a card of E-Series you connect to your SCXI system or you could focus on the NI SCXI-1600, which is a controller for your SCXI chassis and allows you to connect your laptop to the controller via a USB cable. This controller will operate similar to the E-Series and M-series cards.

    We also offer a couple of PCMCIA cards which allows you to integrate the SCXI system with your laptop. It comes from the NI DAQCard-6036E, and NI DAQCard-6062E. Unfortunately, your NI USB-6210 is unable to be used as a device for the Acquisition of data for your SCXI chassis. The list DAQ cards which are possible to use with your system can be found here on the tab 'controller '.

    http://ohm.NI.com/advisors/SCXI/pages/SCXI/modules.XHTML?conversationContext=1

    In addition, we have an old manual SCXI of starting you can find here:

    http://digital.NI.com/manuals.nsf/WebSearch/C195895E8C9CAE3D8625691F004DB285

  • try to open the Control Panel, a statistics box "this file has no program associated with it for performing this action.

    When I try to open the control panel a stats of dialog "this file has no program associated with it for performing this action. Create an association in the creation of an association in set Association Control Panel. "How to do that when I can't the mother lode, the program control panel? Thus the program Windows Fix It; t fix it.

    Hi ChuckCase,

    1. don't you make changes to the computer before the issue occur?
    2. what program of fixit of windows are you running?
    3. what happens when you try to open Control Panel?
    4. do you get an error message?

    Method 1
    I suggest you try the steps from the following link:

    Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista
    http://support.Microsoft.com/kb/936686/en-us

    Method 2
    I suggest you to scan SFC.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • JMS uniform distributed Queue control unit, problem when a node crashes

    Hello
    I have the code according to which a post (with all of the control unit) to a line of uniform distribution in a cluster with two servers (Server1 and Server2) members.
    UDQ - addressing a subdeployment mapped to two servers JMS pointing to each of the Member servers
    -Factory connections using default targeting (I tried mapping them to deployment Sub too)

    serverContext javax.naming.InitialContext = new javax.naming.InitialContext ();
    javax.jms.QueueConnectionFactory qConnFactory = (javax.jms.QueueConnectionFactory) serverContext.lookup (jmsQConnFactoryName);
    javax.jms.QueueConnection qConn = (javax.jms.QueueConnection) qConnFactory.createConnection ();
    javax.jms.QueueSession qSession = qConn.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
    javax.jms.Queue q = (javax.jms.Queue) serverContext.lookup (jmsQName);
    weblogic.jms.extensions.WLMessageProducer qSender = qSession.createProducer (q) (weblogic.jms.extensions.WLMessageProducer);
    qSender.setUnitOfOrder ("MyUnitOfOrder");
    javax.jms.ObjectMessage message = qSession.createObjectMessage ();
    < String, Object > HashMap map = new HashMap < String, Object > ();
    Map.put ("something", "SomeObject" "");
    message.setObject (map);
    qSender.send (message);
    } catch (Exception e) {}
    }

    Steps followed:
    1 post a message of "Server1."
    2. the message picked up by "Server2."
    3. all fine
    4. stop "Server2."
    5 post a message of "Server1."
    6 ERROR: ' chopped format member of MyAppJMSModule! MyDistributedQ is MyAppJMSModule! MyJMSServer-2@MyDistributedQ who is not available.

    WebLogic version: 10.3.5

    Is there a way (except Path Service configuration) to operate "with control unit" for a UDQ, even if some Member servers go down this code?

    Thank you very much for your time.

    If you want to avoid using the Service path, then the alternative is to make members of highly available destination. This will help to ensure that the host for a particular Member PUA is in place.

    One approach to HA is to set up "service migration." For more information, see the white paper of the automatic Migration of Service to
    http://www.Oracle.com/technology/products/WebLogic/PDF/WebLogic-automatic-Service-Migration-whitepaper.PDF

    In addition, I recommend SEO best practices for JMS beginners and advanced users
    http://docs.Oracle.com/CD/E17904_01/Web.1111/e13738/best_practice.htm#JMSAD455 to help WL configuration in general.

    Hope this helps,

    Tom

  • The screen us black until I get to the Windows Welcome screen, where should I start to troubleshoot?

    When I turn on my computer, the screen remains black, until it gets to the windows welcome screen 7, then the computer and video works fine.

    I don't see the start of the video card or the blue HP screen information at the beginning upward.

    Problem is solved.   When I checked the computer with a new video card, I noticed that an HDMI cable was used to connect to my screen.   This allows information to move to the screen until windows load the correct driver for my video card, resulting in a blank screen.

Maybe you are looking for

  • I've updated to Yosemite and my Pages app disappeared?

    I've updated to Yosemite and it seems as if my Pages app is gone. Should I t he buy? It would be less than ideal.

  • H9-1245eo: update of inauthentic HP support assistant?

    There are about two hours that I was just browsing by chance youtube, one flashed black control top box to the left of my screen. Quickly, I open my task manager and saw that my cpu was used by an unknown program. The program isn't there anymore so I

  • Jawbone BT connection on 4.1.83

    I have a jaw headset which worked perfectly TRP to the 4.1.83 update. After the update, I did a reset to fix the fingerprint reader, but now I can not re - pair the bone of the jaw - he is told to try then failed, says nothing, or does not have occai

  • Windows 7 Home premium to windows 7 Professional

    I recently bought computers with windows 7 home premium pre-installed and necessary for systems to have windows 7 Professional and was recommended that upgraded the windows professional. When I received the items, the upgrade is designed for windows

  • Activation of Windows Vista after replacing the hard drive

    I'm unable to activate windows after having my hard drive replaced. The portable station to my Windows Vista Home installed school, when my computer was originally Windows Vista Business. When I try to use Windows Activation, all options tells me tha