The CPU monitoring

Hello

I'm new to BB, I configured the client bbc4.40 on the linux system. In the part of the cpu that it is dispalyng only the average load rather then HIGH output which I used to get the bbc4.20 cliect. Please suggest which changes I should make to get the EFFORT produced in the follow-up to the CPU.

Thanks in advance.

Yogesh

Hello

What is your Linux platform? RedHat or Suse?

If it's Red Hat or Suse, on your BB client Setup, add

TOP = "/ usr/bin/top.

TOPARGS = "-b - n 1"

export TOPARGS TOP

to etc/bbsys.local

and restart the client

Tags: Dell Tech

Similar Questions

  • Win7x64 Home Premium does support double physical CPU (Xeon 3.4) with HT - to see only two graphics in the CPU monitor.

    I have a workstation Dell Precision 670 with dual Xeon 3.4 GHz CPU with Hyperthreading.  I installed Windows 7 x 64 home premium and now cannot see two processors/cores in the system monitors backed up by the release of Registry.  This means that two physical processors or hyperthreading is not supported by Home premium.  I didn't know that this referred to in one of the official literature I've read (and I thought that all the flavors supports two physical processors).  Can clarify you if it of Dual CPU support or lack of support of HT for my processor (I think they're Prescotts of memory).

    Here is the result of a record query, it seems to list the two physical processors and not virtual cores HT.

    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

    Request C:\Users\Sandy>reg HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralP
    rocessor\/s

    HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0
    Information on components REG_BINARY 00000000000000000000000000000000
    Identifier REG_SZ Intel64 Family 15 Model 4 Stepping 1
    Data setting REG_FULL_RESOURCE_DESCRIPTOR FFFFFFFFFFFFFFFF000000
    0000000000
    ProcessorNameString REG_SZ Xeon of Intel (r) CPU 3.40 GHz
    REG_SZ VendorIdentifier GenuineIntel
    FeatureSet REG_DWORD 0x21193ffe
    ~ REG_DWORD MHz 0xd3f
    Update of Signature REG_BINARY 0000000017000000
    Updated status REG_DWORD 0 x 6
    Previous update Signature REG_BINARY 0000000017000000
    Platform ID REG_DWORD 0x1

    HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\1
    Information on the REG_BINARY 00000000000000000100000000000100 components
    Identifier REG_SZ Intel64 Family 15 Model 4 Stepping 1
    Data setting REG_FULL_RESOURCE_DESCRIPTOR FFFFFFFFFFFFFFFF000000
    0000000000
    ProcessorNameString REG_SZ Xeon of Intel (r) CPU 3.40 GHz
    REG_SZ VendorIdentifier GenuineIntel
    FeatureSet REG_DWORD 0x21193ffe
    ~ REG_DWORD MHz 0xd3f
    Update of Signature REG_BINARY 0000000017000000
    Updated status REG_DWORD 0 x 6
    Previous update Signature REG_BINARY 0000000017000000
    Platform ID REG_DWORD 0x1

    C:\Users\Sandy >

    UPDATE: -.

    (Turning things and disable in bios), I confirmed that I see in the Task Manager, msinfo and CUP-z 1 physical processor with 2 threads.  BUT in Device Manager I see all processors & carrots (4) and all report that they function normally.  So it seems to me there is a missing communication between the end user of things and what is seen in the Device Manager.  I tried the option in msconfig to force 2 CPUs, but that made no difference.

    You need Pro see two physical CPU slots, double or not.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • the Task Manager displays only the CPU resource monitor

    Using Ctrl-Alt-Del to bring up the Task Manager appears a little CPU resource monitor.

    .

    Can I fix without reinstalling Windows? Or should I just wait for Windows 8?

    Hello. Try to double-click the gray area (frame) in the resource monitor. Who could return to the version complete.

  • How to monitor the CPU, memory and i/o on the system

    Hello..

    Some body help me?...

    1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
    2. how to monitor the CPU, memory and i/o on the system?

    TQ
    balleur

    In an attempt to partially answer your questions:

    1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

    Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

    2. how to monitor the CPU, memory and i/o on the system?

    I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

    There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

    John

  • "Installer" taking up the CPU

    I have an iMac end of 2012, and lately he worked very slowly. A few days ago, I checked the activity monitor to see "Installer" take a lot of CPU. I leave and rejected it as an error, but sometimes it starts to do it again.  I just kept smoking them until I found several installers taking up half of the space of the CPU. I did some research and I read that the Genio virus, but there is no house icon in the upper right corner and I just can't find any files for it.

    Can download some adware or malware.  A simple, fast and safe way to remove adware and malicious software is to download and to use Malwarebytes Anti-Malware for Mac. There has been developed by one of the most respected contributors and the top of the page in these forums and recommended by almost all of the top contributors here.

    If you prefer to do it manually, follow these instructions in the site theSafeMac.com (author of Malwarebytes): adware removal Guide

    If you want to check to see what adware/malware, you may have before you run Malwarebytes and then download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  • IMRemoteURLConnectionAgent taking up the CPU

    I need help knowing what to do with a process that has taken over from the CPU. The computer is a brand new iMac (retina 4K, 21.5 inches, end of 2015). 3.3 GHz Intel Core I7. Actually right now, I have 3 computers with this same problem.

    There is a process in activity monitor called IMRemoteURLConnection Agent who gets in anywhere from 70 to 95% CPU. I already have a call with Apple and first off they had never even heard of this process. After a while they thought it was related to Messages. They said that it is constantly ping the cloud for contacts in Messages. They thought it could have been a bad image of golden and had me create a new drive bootable with the latest version and install it on computers. This helps not at all. He is still taking up all the CPU. There is same person logged into Messages. I tried to Landau and boots security dealing with issues for a few hours. Then he returned. If someone has had this problem and how you can solve this problem?

    You reproduce the problem when running in safe mode?

  • Disappears from the main window of the activity monitor

    I'm under El Capitan 10.11.5, 15F34 build on an iMac (retina, 5K, 27 inch, mid-2015). If I open the activity monitor, I get the CPU usage, but the main window will briefly appear and disappear. If I minimize and restore, I also get it for a fraction of a second and then it seems to fall back on the dock. The history of CPU option (cmd 3) is grayed out, although I can get it as the icon in the dock.

    My question, then, is what caused this problem and how to restore to normal activity monitor?

    Please read this message before doing anything.

    This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

    Step 1

    The goal of this step is to determine if the problem is localized to your user account.

    Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

    While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

    Test while signed in as a guest. Same problem?

    After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

    * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

    Step 2

    The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Please take this step regardless of the results of step 1.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

  • Low utilization of the CPU, system hot, noisy fans

    My 2011 27 iMac mid has worked well. Here are the basics.

    The system has an SSD instead of a hard drive (therefore less heat than normal). I use the development system: it is not and has never had a lot of junk on it. About four weeks ago, the system started to run hot and the fan was strong while the CPU is about 99% vacuum. I have download the trial of TG Pro and the CPU seems

    "Load" in the photo below, which is less than 3%, is high normal baseline because I'm running TG Pro and activity monitor.

    The noise is very annoying and seems out of line for the load of the system.

    Someone has any practical suggestions or see obvious problems? (Until you point out 24 GB RAM and other fundamental issues, keep in mind that this system has been stable and performing normally in the current configuration for about nine months, save El Capitan updates).

    Resetting the SMC often with these problems reset management system (SCM) controller on your Mac - Apple Support

  • Satellite Pro L360-14F - cannot play videos on the external monitor

    Toshiba Satellite Pro L360-14F
    Video files as avi, flv, mp4 are played with SM-player etc on the screen of the laptop, but not on the external monitor attached.
    A newspaper there is the error message: MPlayer crashed by the bath OF CPU/FPU/RAM usage.

    Which may mean that?

    You already go to the external display by using the FN + F5 keys?
    To do this.

    In addition, you must go first to the external screen and then you need to start the windows media player or other video player.

    I advise to use the VLC Player. It s free fro and plays most of the files

  • Satellite L850-046 - question about the CPU temperature

    Hi Experts,

    I bought the Toshiba laptop 9 months ago, but now notice the temperature warms. I check the software Toshiba Health Monitor and the CPU temperature range of 46 to 53%, fan speed 50%-63%.

    Is - this normal readings?

    I am now using a desk fan pointing in the vents hoping that additional traffic can maintain better temperatures.

    What would be the ideal and the overheating of the readings to look out for.

    Thank you very much

    Because cell phone use for 9 months, I recommend you to clean the cooling fans.
    The fact is that from time to time the dust and debris that may affect the performance of the cooling fans, and this could lead to a higher temperature.

    I clean my fans from time to time using a jet of compressed air.
    It helps to get rid of dust and to lower the temperature.

  • Satellite L650-14F - maximum temperature of the CPU

    Hello guys and sorry for my language.

    Can you tell me what is the optimum temperature for this laptop and what is the maximum temperature?
    Thank you

    Hello

    The CPU temperature is based on a large number of factors and also depending on the CPU model.

    Why is it so important to you?

    If you start Toshiba PC Health Monitor, you can check the temperature. It shows a graph of reading.

  • Satellite A30 - question about the CPU temperature

    Hi all

    I have a Satellite A30 (model name: SA30-151, model number: PSA33E). I had the usual problems with overheating and closing, where I had to clean the radiator.

    My question is, how hot the CPU must sit at and what temperature is dangerous?

    I installed 'Hardware sensors Monitor' and the average temperature is about 55 c, but I saw it happen at 70 c when I'm pushing it.

    I was not able to find something on the net about it and I can't find information on the Toshiba site.

    Any help or advice would be appreciated, thanks...

    The same temperature is on my Tecra M1. Believe me, there's really no reason to panic.

  • We could overclock the CPU of the Satellite A200 - 1 GB?

    Hi all

    How I see the temperature of the CPU of my A200 - 1 GB.
    I can't see it in the bios. Is there any application provided by Toshiba or Vista.

    Another thing, it is that we can over clock the CPU of the A200 - 1 GB?
    IF it is possible, which is the way we need to do this?
    At the same time I have to monitor the temperature of the CPU after overclocking.

    Can someone help me on this?
    Kind regards.

    > How can I see the temperature of the CPU of my A200 - 1 GB.
    > I can't see it in the bios. Is there any application provided by Toshiba or Vista.

    There is no tool of Toshiba that would indicate the temperature NECK.
    Check the 3d tools from third parties such as Everest home edition

    > Another thing, it is that we can over clock the CPU of the A200 - 1 GB?
    > IF possible, which is the way we need to do this?

    Short answer; No, it is not possible to s

  • Satellite M30 - is the temperature of the CPU ok?

    I do a portable M30 growing for a friend and I noticed that the CPU temperature is between 55-72 ° C. I installed an app called sensorsview that monitors the temperature of the CPU.

    This site indicates the maximum temperature for processors Pentium M is 100 ° C, but does not specify the average (it is 1.7 GHz and Centrino). Does anyone know what should be the + average? +

    [http://www.heatsink-guide.com/content.php?content=maxtemp.shtml]

    Hello

    First of all I m a little carful with this type of material followed tools regarding the temperature of the CPU. I mean that if everything is ok, the laptop will not shut itself or something else. In my opinion these tools may not can read the temperature correctly.

    In any case, 72 ° C is in my opinion a little too high. You should try to clean the laptop. I guess there are a lot of dust in the radiator. Use the jet of compressed air to clean the laptop, it can blow out the dust.
    This is why you should not disassemble the laptop so it of pretty easy to use.
    Check it!

  • The CPU temprature is high

    Hello

    I need a software tool to monitor my CPU temprature.
    My laptop chrashes if I start the applications and I think that the CPU temprature is high.

    Tanks for help,
    by F_E_O_S

    Hi Enrico,.

    You don't say what model of laptop you have, but I strongly recommend to remove any accumulation of dust etc. the heatsink from the CPU and cooling fans.

    Also to ensure that there is sufficient air circulation around the laptop for good cool the CPU. If the fans are running high-speed quite frequently this will normally indicate insufficient air flow in the radiator.

    The Toshiba power management utility has a setting to set the cooling fans to give you two maximum performance of CPU (i.e. maximum of cooling) or quieter operation (Minimum cooling), I'll make sure that it is set to your needs (available in Control Panel).

    HTH

Maybe you are looking for

  • Bing and something called sweet packs

    My Firefox shortcut seems fine but when I click it, the page is Bing and the address bar is "sweetpacks" instead of Firefox. I can't seem to change it or to return to a normal page of Firefox. What is going on?

  • HP G62 laptop computer: laptop freezes after startup

    After starting my laptop freezes.  How long after starting varies.  Sometimes it will freeze after only a few minutes. Sometimes it can be operational for an hour or two.  Want to know how to fix this. Tested hard drive and the Long DST failed.  Has

  • MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

    Hello I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MA

  • HP Deskjet 2542: Claim number

    Hello How to get my number of claim for my printer?

  • VGA card problem

    Since 2010, I have a laptop computer, the preinstalled operating system is Windows 7, 64-bit and the brand of card VGA "ATI mobility radeon HD 4670". Since two months ago my laptop has become unstable, the screen suddenly becomes white, then blue wit