The current state of the target is down and it displays red arrow down in OEM 12 c. But in fact the database is running
Hi all
my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?
FYI,.
The error is:
The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.
A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.
Please help me, give your suggestions in this regard.
Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.
Kind regards
-Loc
Tags: Enterprise Manager
Similar Questions
-
Apex 4.2.5 upgrade - unable to connect to the database to run
Hi, did a new install of XE 11 G on Windows Server 2008 (32-bit) - all series of fine and can connect to the installation by dΘfaut of Apex etc..
No other software not installed on server, Oracle in fact no other software at all as it is freshly built.
Trying to connect the database with SQPLUS to run the installation script fails with ORA-12154 error.
I think that the status of the listener seems OK. The instance "xe", State LOAN, 1 operation for this service...
Really confused as did exactly the same set up on my laptop Windows 7 and a hosted virtual server (in fact 2008 R2 64) and two absolutely beautiful work...
Any ideas?
OK solved this... Windows problem, but I don't know what. Automatic updates were turns off so decided to let the server itself up-to-date patch while watching in this... one of the patches installed seems to fix the problem, which I do not know if.
-
Hello
DB version: 10.2.0.4.0 cluster db. EA
Version of the OS: Win server 2008
by mistake one of our dba ran CATPROC.sql and CATALOG.sql scripts in our live production rac database.
After that issues rose and developers face invalid objects. We erased our users manually main invalid objects and it looks like everything is working well for the moment.
BUT when I checked object invalid status, he showed me some 600 disabled objects. I'm afraid in the future will come from unacceptable errors.
What should do? any suggestions? are we in danger? What are workarounds.
Thank you
You must connect a SR with Oracle's Support.
Hemant K Collette
-
How to check the database is created in the database of node 2 RAC
Hi all
Please allow questions maybe too obvious. I'm not familiar with RAC and ASM.
virtual box (Windows 7)
2 built nodes on Linux 6.1 Windows 64-bit virtual machine.
11.2.0.3 software grid & database.
One of DB name is demo
Node1 (demo1)
Node2 (demo2)
1. I installed the 11.2.0.3 grid software and set up ASM with her. The installation seems to succeed.
I am able to use view state using crsctl (see the log)
2. I installed the database software and you want to create a database (demo) by default. the software from 95%, but not able to realized the dbca.
I see that the asm_pmon is running, but not able to see the process of demo db. I think at this point, I don't have my demo of database has been created yet.
Yes, question
1: is the database created?
2. I try to use dbca to create my demo db, but at the stage of creation of the 'copy of the database files' - she complaint ORA-03114: not connected to ORACLE
???? What? What oracle server trying to connect?
3. If the database is created, how to start the database, in particular it has 2 instances (demo1 and demo2)?
Please advise!
Thank you very much!
[grid@demo1 ~] $ crsctl stat res t
--------------------------------------------------------------------------------
TARGET STATE SERVER STATE_DETAILS NAME
--------------------------------------------------------------------------------
Local resources
--------------------------------------------------------------------------------
ORA. DATA.dg
Demo1 ONLINE
Demo2 online
ORA. LISTENER.lsnr
Demo1 ONLINE
Demo2 online
ORA.asm
Demo1 Started online
Demo2 Started ONLINE
ORA. GSD
In offline mode offline demo1
Demo2 offline offline
ORA.net1.Network
Demo1 ONLINE
Demo2 online
ORA.ons
Demo1 ONLINE
Demo2 online
--------------------------------------------------------------------------------
Cluster resources
--------------------------------------------------------------------------------
ORA. LISTENER_SCAN1. LSNR
1 demo1 ONLINE
ORA.demo1.VIP
1 demo1 ONLINE
ORA.demo2.VIP
1 demo2 online
ORA. CVU
1 demo1 ONLINE
ORA. OC4J
1 demo1 ONLINE
ORA.scan1.VIP
1 demo1 ONLINE
Published by: 969880 on November 13, 2012 14:181. What is sure, is that your database is not registered in OCR because there are missing elements in crsctl stat res t exit for database instances.
2. default DBCA trying to restore an RMAN backup to create a database. DBCA probably also try to connect to the new instance of the database to run scripts.
3. you must use:srvctl start database -d demo
This should start all database instances.
But first try to check the DBCA logs that should be under $ORACLE_HOME/cfgtoollogs/dbca and to correct related errors.
-
The problem with SQL after the migration of the database to another machine
Having a SQL strange problem trying to extract a database being moved from one machine to the other. Both machines are running SQL 2008 32-bit and are both Windows 2008 servers. When I try to backup the database using the SQL tools and restore the. BAK file on the new SQL Server, I get the following error:
Restore failed for server 'servername' (Microsoft.SqlServer.Smo)
Additional information:
System.Data.SqlClient.SqlError: RESTORE detected an error on the page (44:2097184) in database 'RestoreDBName' read from the backup set.
Similarly, when I am trying to copy the. MDF and. LDF files to the new server and tie them, I get the following error:
Attach the database failed for the server 'servername '.
Additional information:
An exception occurred during the execution of a Transact-SQL statement or batch.
A system assertion failed. An assertion failure is usually caused by a corruption of data or software bug. To check the database, consider running DBCC CHECKDB. If you have agreed to send images to Microsoft during installation, a mini dump will be sent to Microsoft. An update can be an available from Microsoft in the latest Service Pack or a QFE from Technical Support.
Could not open new database 'NewDatabaseName' create a DATABASE is dropped.
"" Location: "logmgr.cpp": 3277
Expression: lfh-> lfh_startOffset is startOffset
SPID:55
PID: 292876 (Microsoft SQL Server, error: 3624)
Everything I've read, these errors usually indicate some sort of database corruption. However when I run DBCC CHECKDB on the database on the source server, it is up to perfectly don't own... None detected corruption. In fact, this server hosts 8 different databases. Departure from all the correct DB on the source server, none of them will restore however to a new server using one of the methods above. I'm having a hard time to believe that each of them could be corrupted when they show absolutely no indication of a problem.
Anyone have any ideas?Try to make the backup and restore via SQLCMD (or via a query in SQL Server MS window).
The backup will be the following (obviously, change "MaBase" and "D:\BACKUPS" to some database and the location you wish to save - just using for example):
BACKUP DATABASE MyDatabase
TO DISK = 'D:\BACKUPS\MyDatabase.bak. '
WITH NOFORMAT, NOINIT,.
NAME = 'Database MyDatabase - Full Backup',
NOREWIND, NOUNLOAD, STATS = 10, SKIP
Copy your backup to the other server and file make:
RESTORE the DATABASE to MyDatabase
FROM DISK = 'E:\Backups\MyDatabase.bak' WITH FILE = 1,
GO to "MyDatabase_Data" to "E:\SQLDATA\MyDatabase_Data.mdf,"
GO to "MyDatabase_Log" to "E:\SQLLOG\MyDatabase_Data.ldf,"
NOUNLOAD, STATS = 10 REPLACE
Again, change your names and locations in function.
If this does not work, try to restore a database by third-party tools. You can find them in Google. If you don't want to spend the time to research, you can try a tool SQL Server Recovery Toolbox. All the details about this program on the link. http://www.oemailrecovery.com/sql_repair.html
-
Refresh the production database to test the database with RMAN
Hi experts,
I want to refresh the production database to test the database with RMAN. You can help me please how to do this.
I saw a lot of blog on the internet but not got a satisfactory answer.
Reg,
Thomas verrma
Thomas
Follow these steps
1. on the server target
a. Add entry in oratab
b. create init.ora for target db copy of source
c. If you use catalog
connect to the RMAN catalog, you can use the double option to clone run below
one.
RMAN > Connect target sys /
@trgt RMAN > Connect Catalog rman /
@catalog b. check that the backup connects to the source and to collect information on the elements of backup that contains the backup controlfile
c. restore the controlfile
RMAN > set DBID = xxxxxxxx (DBID of the source db)
RMAN > run
{
allocate channels ch1 type parms 'SBT_TAPE' = 'ENV = (NB_ORA_CLIENT =
-
not able to connect to the database using the oracle instant client
Hello
I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.
Please let me know if a solution for everything
Client Oracle: oracle 10.2bFAT client 32-bit
Platform: windows 7 64-bit
Thank you
VeeraThere is little that tnsping can do sqlplus can't.
Instead of
tnsping mydb.myorg.com
Try
sqlplus-s-L /@mydb.myorg.com
or
sqlplus-s-L user/[email protected]If you get
ORA-12154: TNS: could not resolve the connect identifier specified
you know that the customer could not resolve 'mydb.myorg.com '.If you get
ORA-12541: TNS:no listener
then "mydb.myorg.com" could be resolved, but there is no listener it running.If you get
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.If you get
ORA-01017: name of user and password invalid. connection refused
you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
TRACE_LEVEL_CLIENT = ADMIN
TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)Then you will find lines like this in the trace file:
-THE INFORMATION SOURCE PARAMETER FOLLOWS-
Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
Source of the setting successfully loadedAttempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
The parameter source has not been loaded.This shows you which configuration files are read, followed by the settings real read.
nnfgrne: will read if path adapters
nnfgrne: switching adapter LDAPHe's now looking for LDAP name resolution.
nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE
These are LDAP servers, he is trying.
nnflilc: conn sync opening of oid.host.myorg.com:389
nnflfdn: turning simplified mydb.myorg.com name to a unique name.
nnflfdn: using the administrative context: dc = prod
nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = comnnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)nnfgrne: query fails, the leap to the next map
Did not work. Try the other adapters:
nnfgrne: switching adapter EZCONNECT
snlinGetAddrInfo: name resolution failed for test64.test
No luck.
If the resolution is approved, it will look like this:
nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE
nnflilc: conn sync opening of oid.host.myorg.com:389
nnflfdn: turning simplified mydb.myorg.com name to a unique name.
nnflfdn: using the administrative context: dc = prod
nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = comnnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))
Yours,
Laurenz Albe -
Hello
We currently have our Hyperion (workspace, planning, essbase) environment on a single windows server. The associated database (Oracle) with it is on another Windows Server.
The platform will be shared, and for this, the database will be migrated on the server of hyperion. During the process, its name will be changed (but the users/schemas/password will remain)
How to make the platform Hyperion welcomes such a change? The server name can be changed somehow in the configuration? Or do we reinstall us from scratch, the application?
Thanks in advance for your help. Best regards.There is no need to re install, you will have to reconfigure all products with the new name of the host of the database by running the configuration utility, when you are prompted to use select existing table.
Once Setup is complete for planning, you must change the information in the database for each application by modifying the database,Version number will be a real help here.
See you soon... !!
-
Delete the database on Windows
Hello
Could you please provide steps or relevant link to remove the Oracle database in the Windows platform?
Oracle - 11.2.0.3.0
OS - Windows 2003 32-bit
Kind regards
Bala
In fact, I wouldn't use these steps. The main reason is that the DROP DATABASE command will not remove this annoying service. Instead, I would check the database is running, and then use the DBCA Wizard to delete the database. Not only this delete the database for you, it will be also make you the Windows registry (and therefore service) are supported properly.
See you soon,.
Brian -
Error connecting to the database after you run 10 g Forms
Hello
I use Oracle forms v10.1.2.0.2 is the operating system Windows 8 32 bit.
I get the following error (ORA-12154: TNS: could not resolve the connect identifier specified) when I enter the user name, the password, and the database after running the form.
Although I can connect correctly in sqlplus. using the following command: Connect scott/xxxxxx@orcl
the service name is ORCL. I can get it through the following query (see the service_name parameter)
I checked the tnsnames.ora file and it is as follows:
tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G6PM1F1OBA5)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
(SERVER = DEDICATED)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
I have the settings in the file sqlnet.ora as follows:
SQLNET. AUTHENTICATION_SERVICES = (NTS)
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, WIN-G6PM1F1OBA5)
and in file listener.ora as follows:
listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(= Extproc PROGRAM)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G6PM1F1OBA5)(PORT = 1521))
)
)
Looking forward for your help in this matter.
I use Oracle forms v10.1.2.0.2 is the operating system Windows 8 32 bit.
I get the following error (ORA-12154: TNS: could not resolve the connect identifier specified) when I enter the user name, the password, and the database after running the form.
Although I can connect correctly in sqlplus. using the following command: Connect scott/xxxxxx@orcl
As already said, the combination is not taken in charge, but it's quite strange rhat you can connect to Sql * Plus, and you get the error of forms: the error is local and means that the tnsnames.ora file is not where it should be, or there are errors it contains.
You have not all errors in the installation? the forms and reports test programs work?
You have a database on this machine? Looks like that the tnsnames.ora you posted comes from a House of database, you have in Oracle Home Forms? (the absence of the latter that would explain the error you get).
-
RC-40201: unable to connect to the database
Hi Experts,
While running 'perl adcfgclone.pl appsTier' I get below error.
[applmgr@tfnvlskp01 bin] $ perl adcfgclone.pl appsTier
Enter the password [APPS] APPS:
....
....
Enter the number of the port pool [0-99]:
70
Audit of the pool of port 70
fact: Port pool 70 is free
Information available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst complete port
Checking the connection to the base...
RC-40201: unable to connect to the TEST database.
Enter the listener of the port database [1531]: 1526
RC-40201: unable to connect to the TEST database.
Could not establish connection to database on Port 1526.
Please verify that the database is running.
Make sure that the Port DB corresponds to that used on the dbTier.
ERROR: creation of context not completed successfully.
Please check for errors in the /tmp/adcfgclone_28867.err file
But when I check the listener and the DB to db node status, everything is running.
STATUS of the LISTENER
------------------------
Alias TEST
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date October 14, 2013 06:33:49
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /app/orabin/testdb/11.2.0/network/admin/TEST_tfnslskp01/listener.ora file
The listener log file /app/orabin/testdb/11.2.0/log/diag/tnslsnr/tfnslskp01/test/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROCTEST)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=tfnslskp01.d1.peapod.com) (PORT = 1526)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service 'TEST' has 1 instance (s).
Instance of 'TEST', status UNKNOWN, has 1 operation for this service...
The command completed successfully
SQL > select instance_name, status from v$ instance;
STATUS INSTANCE_NAME
---------------- ------------
OPEN TEST
Outputs information complete port available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst
List of allocated ports based on port 70 pool *.
Web listening port: 8070
Database port: 1591
RPC port: 1696
Reports port: 7070
OPROC Manager of Port: 8170
Web PLSQL Port: 8270
Port of servlet: 8870
Listening port of forms: 9070
Data port for the server Metrics: 9170
Req server settings. Port: 9270
JTF Fulfillment Server Port: 9370
Map Viewer Servlet Port: 9870
Utility Web OEM port: 10070
VisiBroker OrbServer Agent Port: 10170
ACEM Server Port: 10620-10625
ACEM Telnet Port: 10620,10622,10624
ACEM Port Dispatcher: 10580-10583
Range of ports OACORE Servlet: 16700-16709
Port range of discoverer Servlet: 17700-17709
Port range of forms Servlet: 18700-18709
Port TCF: 15070
Range of ports XMLSVCS Servlet: 19700-19709
Port of Java object Cache: 12415
iMeeting Collaboration Server Port: 9570
iMeeting the registration Server Port: 9670
iMeeting iMon port Monitor Port: 9770
Please let me know if the value portpool.lst to the Port of database should be 1526
Or
Miss me a few concepts here and I have to choose another port instead of the 70 pool value.
OS - RHEL 5.4 version (64-bit)
Version of DB - 11.2.0.3
Version of the EBS - 11.5.10.2
-Thank you
Hello
This is what has been done on my previous post on the basin of the port and the listening port you are trying to connect, as above, that you use 70 portpool was offset... This is what did not create a connection on port 1526 (which means chicken port 5)
anyway nice to hear that the problem is now resolved
Please mark the thread as answered and close it.
Thank you &
Best regards
-
Change the host name of the database server, which must change accordingly?
Hello
I have an oracle (instance 11.2.0.3.0) database is running on a Linux machine. (Release of Red Hat Enterprise Linux Server 5.8 (Tikanga))
now, the database is running.
issues related to the:
1. what files to change after change of server name? (tnsnames.ora? listener.ora? something else?)
2. what appropriate measures must be in what orders? thank you very much in advance
(we need to bounce back to the database, listener?)
PL see also MOS Doc 578169.1
HTH
Srini -
Update page APEX when executing process on the database
Hello
I create a package on the database, which performs certain actions. These actions can be considered in different steps in a workflow, but this package does that automatically. Would be nice, if the user gets information about what happens during the process execution.
So my question is: is it possible to update the information on a page of the APEX, during execution of the process?
I am thinking something like this:
Step 1: done
Step 2: done
Step 3: processing...
Step 4:
Step 5:
While the substantive process on the database is running.
Is it possible, and if so, how has been done? - If you can get the steps as different records (for example if they are inserted in a table or a lined pipe function can return these documents), then create a new SQL report based on an SQL query, fetch records (possibly ordering him by any column to store these ID information or insert the date)
- Then add a JS code that refreshes the report automatically after a predetermined period (5 seconds or more), you can find this code snippet in this thread: {message identifier: = 9491610}
-
Logon sqlplus from the database server do not.
I want to export data from the a database. I can sqlplus as a particular user (owner of the table) from a remote server. But when I try to sqlplus or run the exp from the database server (the server where the database is running), I refused to sign. Is there a configuration in the database in order to prevent this loggin user from the database server
/U01/Oracle/app/product/10.2.0/DB/bin-> sqlplus testuser / *.
SQL * more: release 10.2.0.3.0 - Production on Thu Apr 29 14:28:30 2010
Copyright (c) 1982, 2006, Oracle. All rights reserved.
ERROR:
ORA-01017: name of user and password invalid. connection refused
/U01/Oracle/app/product/10.2.0/DB/bin->. / testuser exp / * file=/tmp/interface.dmp tables = interface
Export: Release 10.2.0.3.0 - Production on Thu Apr 29 14:28:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 1017
ORA-01017: name of user and password invalid. connection refused
TIA
RaviTry this.
1. the cd in your home directory.
2. starting at the prompt, so source oraenv
-> . oraenv
3. When prompted enter the name of your database, in the same case, as in/etc/oratab.
4. try to connect now
-> sqlplus testuser / *.If it works for you, then you must ensure you environments ORACLE_HOME, ORACLE_SID and path are correct - as oraenv does for you.
-
Need help on expdp and the size of the database.
Hi all
I ran a command expdp
expdp NOLOGFILE ESTIMATE_ONLY = Y Y =.
Here is the output I got.
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. estimated 'SCOTT '. "' MS_DATA_STORE ' 539.1 MB
. estimated 'SCOTT '. "' SYS_EXPORT_FULL_03 ' 488 MB
. estimated 'SCOTT '. "' SYS_EXPORT_FULL_04 ' 432 MB
. estimated 'SCOTT '. "' URL_URL ' 267 MB
. estimated 'SCOTT '. "' MS_BUFFER_TRACK ' 203 MB
. estimated 'SCOTT '. "" NCS_ADAPTER_TABLE_OUT "168 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_19 ' 102 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_11 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_12 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_13 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_14 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_15 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_16 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_20 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_21 ' 100 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_22 ' 100 MB
. estimated 'SCOTT '. ' SYS_EXPORT_SCHEMA_18 '99 MB.
. estimated 'SCOTT '. ' SYS_EXPORT_SCHEMA_09 '98 MB.
. estimated 'SCOTT '. "' SYS_EXPORT_FULL_05 ' 95 MB
. estimated 'SCOTT '. "' SYS_EXPORT_SCHEMA_17 ' 95 MB
. estimated 'SCOTT '. "" SYS_EXPORT_SCHEMA_01 ' 92 MB
I had read that, SYS_EXPORT_SCHEMA_XX are created while taking the dump with expdp and if stop you it without a showdown at work, this kind of remains of tables in the DB.
I CAN DELETE THESE TABLES, BECAUSE IT IS TOO MUCH SPACE. ???
Thank you
NitinOracle will create master tables in the format you mentioned taking the export using expdp
You can drop them and nothing will happen even if the database is running.Please mark as correct and answered so this can help...
Maybe you are looking for
-
I have HP Pavilion a1742n Desktop PCI installed the second hard diskkeeps separate from each other each otherwho has vistaIt seems to run xp on this computer I can sayexcept a few thingsone of the few is that it can display the ethernet cardwhose not
-
Recently firefox will not access any web site Acer Aspire 1 Linux
For the past few days firefox will not access any site, even if the wireless network is connected ok. NetBook runs ok other applications without any problem. When the browser shortcut is selected, shortened browser turns for a few seconds then stops.
-
VBAI Interface - Get Image->; Dest Image inspection
I have a complete Vision algorithm built in Vision Builder AI and programmed a VI in Labview that started the algorithm and results used to calculate. It works very well. Connection between Labview and VBAI is correct and the results are updated. Now
-
Acer Aspire D270 SD card not recognized. Driver is up-to-date.
My card reader has stopped working. I read somewhere that it could be burned. Is it possible to check this and or replacing it?
-
Alert the UAC (User Account Control)
I think that there is something wrong with my Microsoft Office Word 2003. I bought Windows7 a month ago and downloaded Word 2003; It seemed to work OK, then a few weeks later the UAC alert started appearing whenever I tried to open Word. In fact, it