The custom Enum items turn on and off dynamically

Similar Questions

• structure of the event to turn on and off a LED

  Good afternoon

  I would like to activate a part of my algorithm according to the value in another part. To make it easier, I symbolize the value by a button and tried a structure of user event to turn on or turn off an LED located in another while loop.

  I can turn on the LED, but unfortunately I can't spend off of the LED thereafter.

  It is possible to change the structure of the event and select the option "change value". However, I would like the fatest way to turn on and off using the structure of the event and the Bay. I mean I would like activate a part of the algorithm only if the button is enabled for not having a continuous audit of the value of the button by the structure of the event.

  Please, if anyone has an idea to turn off the LED (after the switch on), add a comment without hesitation.

  I will be happy to solve this simple problem.

  Thanks in advance for your help.

  Ragards

  You have a race condition.

  When you click stop, it's a race about whether if the event gets not saved and destroyed by the removal of the stem all loop against sending the same user in the lower loop.

  Why it only seems to happen with the case of false must be a quirk of how the code is compiled and the order, it is run.

  If you put a step between your Boolean switch and LED, for me anyway, the error is now generated on the true case of the structure of matter (always false for switch.).

  If you put a constant error in the lower loop and wire while guaranteeing the Unregister event so that you now it does not run until the two while loops are arrested, then I don't see a mistake regardless of the value of the Boolean switch when you click stop.

• Loading with interruptions, screen turns on and off

  I always put my phone in silent mode and plug it in before going to bed. I noticed it turns the screen several times during loading. I can't that assume this is caused by the brief on the charger, the screen always turns when the phone is connected.

  When the battery is almost full, it often becomes extreme the screen starts to turn on and off quickly. This morning, I took a screenshot of the use of the battery before disconnecting. It shows a decrease in the rate of load to 100%, indicating my phone set on another light show.

  I tried two different Chargers, (one came with the Z3C we speak, the other with my Xperia V) a magnetic cable and mini-usb ordinary and even three Sockets different. Problem persists.

  While I do not notice an impact on the performance of my farm, I'm afraid that it will destroy my battery finally. My phone is only six weeks old. Someone at - he seen this before? Any ideas to fix this?

  

  Hey guys,.

  I finally thought to it: it turns out that a clock plugged into another outlet in the same room was the cause of the problem.

  I hope that my battery was not too suffer from these sessions of loading bumpy.

• dynamically create and destroy the custom menu item

  I have a standard TestStand platform that I use on multiple systems.  On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration.  I know how to manually create these menu items, but they are no longer valid for some sequence files.  I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.

  I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items.  Does anyone know how this can be done?

  Thank you

  Matthew

  Yes, see the online help for the members of the following APIs:

  Engine.GetEditTimeToolMenuItems

  EditTimeMenuItems

  EditTimeMenuItem

  Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.

  In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.

  Hope this helps,

  -Doug

• Tecra series fan turns on and off without stopping

  Hello

  I have a Tecra A3 - 185 with processor 1.73 and 504 MB of RAM, which otherwise, I'm very happy for. The only problem (but important) is that the cooling fan constantly turns on and turns off. When the standby power system is turned on high-performance computer (when browsing, emailing or even doing nothing) active fan cooling for 25 seconds it turns off for 20 seconds, is it on again for another 25 seconds and so on.

  There is no even when he uses 0% CPU. I tried to change the power settings so the processor speed is reduced to 3-6 (whatever that means) with some success, but it's not really dealing with the problem all together.

  I had an another Toshiba before without any problems of this kind. Could someone tell me if it is supposed to be like this? (As I'm about to throw the computer out the window close-very annoying with this turn ups-thing) and if it is, give me some settings of the device which will take care of the problem of energy saving.

  Please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23170
  Here, you posted the same.

  Uttered in another thread, it's normal behavior. The fan starts to spin when a certain temperature level has been reached and stops turning when the temperature drops.

• TE2000 - screen turns on and off quickly

  Hi all

  My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

  It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

  Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

  Hello

  Have you tried to check if this problem also appears on external monitor?
  Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

  Looking for a second hand TFT screen?
  It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
  Therefore, you can use each view of each laptop that supports the 14.1 screen size

  Good luck

• WiFi starts to turn on and off

  Every 15 minutes, my wireless starts to turn on and off repeatedly at a fast rate. I mean, it turns off and then over time offshore on a second and repeat this until I put the computer to sleep, then wake it back up. It of really annoying and makes the difficult to use computer.

  I have a mid-2012 13 "MBP El Capitan running.

  Here is a tutorial that can help.  http://www.switchingtomac.com/tutorials/OSX/MacBook-Pro-constantly-dropping-wire less-con You can also go to/network/advanced/airport system preferences and delete networks that you no longer use. Or swipe your preferred network in the upper slot. Make sure Remember networks this computer joined, is checked. Or you can remove and re-add your network. Reset router by unplugging for 10 seconds then restart him. Make sure the firmware on the router is up-to-date.

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Computer not start, screen black, I have to turn on and off several times (I have Vista)

  When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

  If the 2 methods below do not work, you may have to reinstall Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Getting context object null when using the custom menu item.

  Hi all

  I implemented a sample application to add menu item custom to the list of messages and we test this build on 9000 os 5.0.0.41 Blackberryy 1

  On BB 9000, we have 2 message inbox, A like Blackberry by default message inbox and B as long as the Inbox for the e-mail account, I have set up on BB 900.
  I implemented the menu custom application to add menu on the message list option.
  I see this option on both my inbox, the question that I am facing is when I click on the menu item by selecting the email in the message of default A Blackberry inbox I can get the context object were like when I click on the same message next to the Inbox B I'm always get the context as a NULL object.

  Below is the code I used to add the custom menu item.

  Public Shared Sub main (String [] args)
  {
  If (args! = null & args.length > 0) {}
  call from another entry point. Add menu items mark as Spam and mark as suspects.
  {if(args[0].) (Equals ("GUI"))}
  try {}
                          
  create menu items.

  MyMenu ApplicationMenuItem = new EmailFile();
  Add the menu item in the list view and send by e-mail.
  Amir ApplicationMenuItemRepository = ApplicationMenuItemRepository.getInstance ();
  amir.addMenuItem (ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, mymenu);
  } catch (Exception e) {}
  Utility.debugLog (try (), CLASSNAME, 'hand', Utility.EXCEPTION_INFO);
  System.out.println("Error:"+e.ToString());)
  }
  } else {}
  show on the application of spam...
  AppMain _theApp = new AppMain();
  _theApp.enterEventDispatcher ();
  }
  } else {}
  show on the application of spam...
  AppMain _theApp = new AppMain();
  _theApp.enterEventDispatcher ();
  }
  }

  Can we know what is the problem in my code or something I'm missing.

  Thanks in advance.

  Navneet Gupta.

  application menu items have been bugged for ages. There is nothing you can do except change your workflow. in some cases, you can recover the app screen and trying to extract something of these fields, but becomes more difficult in the new OS versions because of custom fields used by rim.

• BlackBerry Smartphones retro lighting keyboard turn on and off by itself

  I got a new Verizon BBTour today, I had no problem to transfer my BlackBerry Storm 9530. I typed my first email tonight and found that the backlight of the keyboard is disabled while I was typing, I was about to get up to turn on the light of the House, then light keyboard turn around himself, then a few seconds later to stop again. He was turning on and off itself.

  Anyone have this problem? or does anyone know if there is a problem or that I need to set up somewhere? I checked the configuration on the screen/keyboard, this is exactly the same as the storm I. Help, please

  Joseph

  The backlight on the keyboard is automatic and the sensitivity does not always fire when you would like to.  But, if you are in low light and keyboard backlight does not instantly, place your hand on the keyboard and he rip off and the light.  If the sensor captures a bit of light, albeit indirect, it turns off the backlight.

  There is not currently of an option to change this behavior and it is battery.  It is not an irregular operation of the device.

• Hi, I need touch screen turn on and off software for my dv6

  Hi, I need touch screen turn on and off software for my dv6

  You can find all the software, drivers, information available for your model by using the link at the top of this page titled 'Support & Drivers'.

• Incessant turning on and off between machines?

  I use Production Premium 5.5 at work and now I need to work often at home. I understand that my license allows installation on two computers that I am the primary user of and the two computers cannot run the software at a time.

  That I need to turn off Production Premium and everything is modules each afternoon so I can use it at home and then turn on and off every night at home so I can use the next day at work? Or includes the software, via an internet connection, I guess, that the other licensed computer does not use the software at the moment which allows me to use it without the mess of constantly activation / deactivation twice a day?

  You do not have to disable the facility any circumstance other than wanting to install and activate it on another computer.

• I installed the latest version of Photoshop from the creative clouds and my tool work started weird type, whenever I try to use the text tool to correct a paragraph in a the entire layer leyer turns black and I don't see what I'm doing. The whole shebang

  I installed the latest version of Photoshop from the creative clouds and my tool work started weird type, whenever I try to use the text tool to correct a paragraph in a the entire layer leyer turns black and I don't see what I'm doing. Also, the entire workspace is greater and the tools of icons so that they does not fit in the screen... Any body can help?

  If your running windows make sure you have the latest device driver for your graphics card installed.  All entries must be selected and be on a black background, but you should be able to see is that the text.

  

• My iPad2 (iOS9.2) has locked up. I can turn on and off, but he can't see the icons. Cannot touch and change the screen.

  My iPad with iOS 9.2 2 locked. I can click it and outside. There is no guest sign in code. He immediately opened to the icons, but I can't switch to another screen icons. When I touch one of the icons, nothing happens. No movement at all. Even the clock doesn't change. Does anyone else have this problem?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.