The custom section NRT denorm dependencies

Similar Questions

• Print questions after the custom section changes using a printed code

  Hello

  We have problems with the order of the custom section. Please find below bottom

  1. we have a custom code to print sections customized specification associated with the material specifications

  2 this custom code developed 2.5 years ago and absolutely perfect job

  3. this custom code actually built XML sections customized the associated specification which is transformed into PDF using XSLT by extending the print features.

  Recently, we changed the order custom sections appear in hardware specifications. Once the order gets modified with the help of Admin-> Data-> custom section order Custom. New order got reflected in all the technical features without any problem

  But the custom sections do not print in the same order

  When we studied, we found the following

  1. printing order is fine when using the default print template provided by oracle

  2. printing order is not very well when we use our custom print template that uses our custom code developed 2.5 years back

  When we have investigated further, we discovered that any new record is created once the order has changed to print very well in the same order using our custom code

  But the old specifications that were created before the implementation of the custom section control do not print in the same order

  Debug us the solution, with the old card and discovered that code is return data in the old order and not in the order indicated in the specification

  We tried all the properties we could and noting works as expected for the old specifications and new specifications get the order appropriate under the new defined order

  None of the sub properties get the data in the correct order in the old specifications

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedModifiableValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.ModifiableValues;

  Can you please let us know if this is a bug in the product? or is it possible that we can do our custom code works for the old specifications?

  Can you also let us know which table stores information about order of custom hardware specifications section?

  Thank you

  Mani

  Sounds like the same issue post to https://community.oracle.com/thread/3804143.

  Thank you

  Pourbaix

• I met an Execption Time out ([HttpException (0x80004005): TimeOut]) when I try to export the custom section.

  Can I export other configuration item. but I met an Execption Time out ([HttpException (0x80004005): TimeOut]) when I try to export the custom section.

  How to get the cause root? How to solve this problem.

  Thank you

  Hello Terry,

  Please try to add the following in the section in the Web\Portal\web.config

  You can extend the time-out value to avoid the error when the data in the custom section are too big and too long to load.

  I hope this helps.

  Thank you

  Jessie

• What is the name of the table that has the name of the custom in the Oracle database Section?

  What is the name of the table that has the name of the custom in the Oracle database Section?

  Thank you

  Nefertari

  The names of the custom Sections are stored in commonExtendedAttributeML, the extended attribute table.

• Security, I tried the custom settings, I went back to remember history, but key to REJECT 3rd-party cookies disappeared, now many 3rd party cookies is followed.

  After trying a story custom in the Section for the protection of personal information (not security as the first mentioned section), I went back to "remember history" but now, there are NO button to click to prevent the 3rd party cookies to enter computer. Now, a lot of 3rd party cookies appear very fast. I want the button to avoid 3rd party cookies returned so that I can use.

  Note that the choice "Use the custom settings for history" allows you to see current history and cookies settings, but by selecting that choice is not to make changes to the parameters of the history and cookies.
  
  Firefox displays the choice "To use the custom settings for history" as an indication that at least one story and cookie settings is not the default to make you aware that the changes have been made.
  
  If all the history settings are default, custom settings are hidden and see you "conservation rules: (never) don't forget history."
  
  "Never remember history" means that private browsing is active and "Always use private browsing mode" Gets a check mark.

• The Customer Service of group policy has denied access problem

  After the execution of a routine Windows Update as I always do, I was asked to restart my HP laptop (running than Home Premium 32-bit Vista). The only other thing I had opened was a radio station playing music from the internet. I didn't close anything before restarting as I thought he would close himself. So I just rebooted. Like the reboot process that was going on, I noticed that my laptop came into DOS mode and all kinds of lines of text have been created and saved, but I assumed it was part of the updates. However, when I went to reconnect, I was greeted by the following: group access policy Customer Service refused.

  Much I read on the forum and heard that this problem occurs for many. What I read, it seems to have nothing to do with the specific update or that they were installing the software, but everything to do with the user account?

  I had only one account configured, so I was forced to restart in safe mode in order to create a new account. But when I created this new account, it does not appear in the c:\Users[user-name]\Music\iTunes\iTunes. All my user account is a folder owner and a Public folder, and no record has my user names listed in their breast. So I couldn't copy the files from my old username to my new.

  I tried to restore my computer to a different date, but unfortunately, I had too many things on the laptop to create a backup file on the D drive, I never did. I know, stupid me!

  I also tried looking up 'services' in the help section and then scroll to find "group policy client" and that there is nothing listed at close distance from that.

  I've seen a lot of these posts dating from 2008, 2010 and 2011, and I tried just about every does not.

  Can someone help me please? I use this laptop for my home based business and my Quickbooks is. I depend greatly on this laptop, and I need to work again for me!

  Darlene

  Hello DarleneR,

  Thanks for the return of the response.  You have attemtped to enter your boot options and try last known good configuration?   You have a Setup disk for your version of Windows Vista?

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Please let us know status.

• I can't get my computer in safe mode. The custom of menu f8 "Let me pick something other than the normal mode. My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.

  I can't get my computer in safe mode.  The custom of menu f8 "Let me pick something other than the normal mode.  My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.  I have a Trojan horse on my computer so I'll try to get it in safe mode.

  Hello

  Start - type in the search-> MSCONFIG box find top - make a right click on - RUN AS ADMIN

  Control - Section Boot - Safe Boot Startup tab and check the boxes below if necessary - APPLY / OK - REBOOT.

  ===========================================================

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The customer service horrible, problem still not solved!

  Have been waiting and redirected countless times with Dell, the service is absolutely HORRIBLE. My problem must be resolved so easily but all support Dell seems to be able to do is redirect me to departments who "don't deal with this issue" and continue to redirect me to the departments that are not yet open.

  Here's my question:

  I have a pro place 8 tablet and I lost the original charger. All I need is another charger since most chargers are not compatible with this tablet (which is another complaint all on its own). I found it by these forums to search and discover that it is a common problem that Dell is well aware of.

  So I call them.

  Start telling them that my tablets not charging

  The support guys trying to tell me that I need a new motherboard... $ 269

  Of course, might be possible, but I remember actually pre lose my charger that whenever I tried to use another charger, it wouldn't work. Also online in the support section for this tablet is the FIRST most popular question and the first solution, they point out, is that you need to use the original charger.

  Oh OK, well, if you think that's the problem, I can redirect you to sales...

  Uh, you're not supposed to know that... After you've tried condescendingly explain to me why the motherboard needs to be replaced after that I had asked you...

  Good redirected to sales

  We no longer sell this charger

  Okay is there any other place I could possibly get this charger

  You can try best buy or Amazon

  Thank you very much.

  After looking on their Web sites and to realize that they don't sell it, I decided to call and ask what will work the Chargers not Dell or the specifications of this special charger so that I can. just. fees. my tablet.

  It took me quite a 1 h 30 trip comprising services saying they are allowed to sell Dell products and cannot tell me even this charger specifications and that I can ask other departments about this. Then redirected to incorrect departments or those that are closed. All it seems to stop me from buying a charger for $10 anywhere else.

  Don't know what else to say. Still have no charger, still cannot order a new, still do not know what other charger would work. Call us and be redirected at least 2 hours, I have 16 total number of calls on my phone to their different support numbers. I think I know their business better than at this point. Literally the worst customer service I've ever had, wouldn't mind so much if only I actually got my problem fixed! Afraid to never buy Dell again where any little thing goes wrong and you are ADMIN NOTE: profanity removed according to the TOU >.

  Hi Dolotova,

  Thanks for posting.

  I apologize for the service you have received to date.  Unfortunately nobody has referred you to the spare parts page.  Here's the charger you are looking for.

  Kind regards
  Robert

• Download error when I try and click on the apps section [was: download]

  When I try and click on the apps section in creative cloud that it says download error please contact customer. Can someone please tell me what this means in order to fix and continue with my school.

  Windows or Mac?

  What is the full error message? like its saying, Installer is no longer functional or unable to reach the server Adobe... etc?

  If possible after the screenshot of the error message.

  Wired Ethernet or Wireless/Wifi Internet access?

  In the meantime, try with the steps mentioned in the link below:

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• Personal link on the header of the Application (Section Logo)

  Hello

  We want to add a link custom request header - section Logo, which is a link in the section logo secondary to use as a link on header brand logo and it redirects to the home page. We want to add a different link to the image of the secondary logo on the header section.

  I was looking at the menu extension user's guide, it provides the link on the header section. Please let me know if there any custom option available to the general public to do this. Ortal

  Kind regards
  Kumar

  Hi Kumar,

  I don't think that we support this extension.

  Fortunately, there is a solution, you can manually add your code in the file ascx directly.

  These files are:

  % ProdikaHome%/Web/WebCommon/Controls/LoginPageSuiteHeader.ascx,

  % ProdikaHome%/Web/WebCommon/Controls/SuiteHeader.ascx,

  %ProdikaHome%/Web/WebCommon/controls/SuiteHeaderSupplier.ascx

  Thank you

  Wensong

• Group of system cache emptied auto Extended attributes/Custom Sections (prodikaadmin) account

  
  We knew that person logged in as that of our prodikaadmin system account, but in the regular Cache Flush line waiting, it shows empty prodikaadmin the cache of extended attributes/Custom Sections. I want to check if this could be automatically triggered if you rinse manually or we have concern for safety.

  I think it started with 6.1 or 6.11 but yes, the Portal do, Admin and expanded Sections attributes/Custom auto-cache hunting now.

  Hope that helps.

• Extended attributes / Custom Sections and features multilingual

  As we look to move the platform of analytical properties deprecated to recreate in the ext attributes / custom sections, we do not see the possibility of creating these for multilingual data entry.  Analytical properties allow multilingual data entry.  If the plan is to remove this feature of Agile in the future versions we will not be able to upgrade until this feature is present.  Prevents us today to use EA / CS for this data in the form of text must be in the local language for sellers.  Is there a plan to make these multilingual data, or did I miss a feature that I have not yet found?  THX

  Custom data does not support values multilingual for EA/CS, qualitative elements and lines/columns names, but we do not offer an extended attribute free-content multilingual.  For the capture of free text data cannot contain more than one language at a time.  So if you rely on a free translatable analytical property you will not be able to provide the same functionality with extended attributes.  We'll add a text attribute free multilingual in our next major release so you will have to wait the release to completely migrate your analytical properties.

• Cannot change a custom section

  Hello

  I created a custom section called 'FOCUS' in my profile. Screenshot attached.

  I can't edit this section. I have tried in different browsers but had no luck. I can change everything.

  Any ideas?

  Thank you very much

  Gillian

  

  Hello - the creative fields listed in your update on your profile are generated automatically based on the creative field, you used more projects than you have downloaded. That you change or add creative fields for new and existing projects, the update will automatically change to reflect the fields of the projects that you have downloaded. If you have no published projects visible to the public, you will have a listed accent.

• Big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

  So we're all aware of the issues with vCenter 5.5U1 WebClient and how we are forced to use it to make use of all the features of the v10, vDS 5.5 vHardware (config switch changes the synchronization problems if an emergency change is done on c# client vDS) VSAN only available via the web client, flash, sluggish to questions do not respond the questions and the list goes with the presentation of the menus and hard to navigate, issues SSO (always after 5.5 upgrades)

  So @ VMware vCenter Architecture Team is going to make an effort to hear and give due to the much needed performance improvements and improvements to the user interface before adding more features and SSO type services which majority of clients don't use not and not force it's customers continue to loose faith its vCenter product?

  Looking for answers with options to remove vCenter 5.5 U1c installation as well as a promise to answer to these in vCenter 6.0 version!

  Here is your answer. First of all, to use Chrome as your browser, then you need to go with at least 4vCPU * 32 GB of RAM & adjust the segment size of java for SSO, Tomcat, (TC) Management Server, inventory server and profile based storage to "refine" vCenter device with DB Oracle embedded or external memory. I did, and performance gains went 10 X. This includes the vSAN enabled running clusters. My recommendation that works very well based on design documents:

  vCenter Server inventory	VMware VirtualCenter Management Webservices (tc Server)	The inventory service	(Sps) profile-based storage service
  Large (more than 400 guests or 4000 VMS) stock	4 GB	12 GB	4 GB

  Setting on the vCenter server 5.5 of the memory unit

  • Connect the unit to vCenter server using SSH
  • VI /usr/lib/vmware-vsphere-client/server/wrapper/conf/wrapper.conf configuration file, locate the JVM memory section and change maxmemory to 4096

  Line 66

  # Memory #wrapper.java.initmemory = 512wrapper.java.maxmemory = 4096 JVM

  • /usr/lib/vmware-vpx/inventoryservice/wrapper/conf/wrapper.conf VI configuration file, find the setting. MaxMemory and replace it with 12288

  Line 116

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 12288

  • VI /usr/lib/vmware-vpx/sps/wrapper/conf/wrapper.conf find the setting. MaxMemory and change from 1024 to 4096

  On line 154

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 4096

  • Restart the vCenter device w / DB (1000 hosts) external /embedded for lab (100 guests)

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2005086&sliceId=1&docTypeID=DT_KB_1_1&dialogID=294472825&StateID=1%200%20294492358

  Documentation Centre of vSphere 5.5

  PS: vCenter 6.0 has much better performance based on my beta test... so don't lose hope yet. Many improvements to come...

  PS: I've also broken down on this here until I figured this out just recently: Re: big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation