The Dell Precision T7600 CPU temperature and fan speed

Hi all

I recently got a Dell Precision T7600 workstation that has two processors Xeon E5-2620.  I checked the specifications of Intel and the maximum temperature for these processors apparently is 77.4 C.

However, when you run fairly intensive applications that can last a few days or so to analyze, I noticed that the CPU temperatures get much hotter than this no difference in the speed of the fan.  I used speedfan and CPUID to check the temperature/fan speed.  The highest I've seen the temperature was 90 c and the fan speed has been only 900 RPM.  He regularly sits on 70 c and still no response from the fans.

I find this a little hard to believe given that surely fans should be a little lower than 90 c action!  I checked the settings of the bios (version A05) and the fan speed control is on auto.  I have also run the diagnostics and it reported no problem.  The fans run, but I'm not convinced that is the speed controller!

Is this normal?

I managed to re - install the A10 bios (it appeared to include a few things my already installed version is not ).

Anyway, tried to launch a number of things to keep the processor at 100% for a few hours.  It seems that the fan speed changes now and the maximum temperature of the processor, I was able to get (and briefly) was 72 C.  He had served mainly the mid to high 60s with fan speeds ranging between ~ 1000 - 1500 rpm, as required to keep it there.

I would say that the new BIOS has solved my problem.

Tags: Dell Desktop

Similar Questions

  • The satellite C855 - raised average temperature and fan speed

    Hello!

    I got this toshiba Satellite C855 since March this year. It is only recently that the CPU temperature and the speed of the fans have been worrying me.

    When I'm not playing games or doing a livestream my CPU temp is about 35-40% with the regular 50% fanspeed or not on because she was cool.

    When I play games however the fanspeed is up around 66 to 68% with the central unit was 55-60%

    I was wondering if this is normal? or I have to clean it by taking it apart. If it's the second option then I'm worried because I don't want to damage anything inside. In addition, I'm not bad with the inner workings of a computer.

    Any help or information would be greatly appreciated thanks.

    In my opinion there is no reason to panic. T is the logic which is higher under stress, activity of the CPU and CPU produces more heat. Laptop needs to be cooled correctly, so the sensors that control the cooling fans sign up for increasing temperature and cooling fans run on higher speed.

    There is no reason for cleaning. And one day if this must be done please don t do it alone. You are not allowed to do this.

  • Satellite M70: access to the data of temperature and fan

    While we did not have these problems with other laptops, we found a way to access the data of temperature and fan on a Satellite M70.

    A friend has tried this on Linux but have failed and also with XP I do not find a way to read data (current temperature of the CPU, or State of the fan-cooler).

    Given that I noticed several irregularities when using (the fan is that the CPU load is very minimal), work sometimes is going to be a little uncomfortable.

    Thanks for the advice / gw

    I put t know if it will help you, but in this ad, someone managed to run a control application of the material.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14284

    Maybe it will work on your laptop.
    But to my knowledge Toshiba doesn't support this request and I'm not sure it will work.
    Anyway, try it's free ;)

  • Card PCI-6259 is compatible with the Dell Precision 390?

    Hi all

    I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

    Thanks to all in advance.

    Kind regards

    justdomechanicalengineering

    Hello

    We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

    Best,

    Dan Nelson

    Technical sales engineer

  • script which gives the hostname with more CPU resources and memory available

    Hello

    Anyone have a script which gives the hostname with more CPU resources and memory available in the cluster?

    Concerning

    Vickie

    Hello, VicMware-

    You can get the host with the free CPU, or with the most free memory resources, using the following:

    ## get the host with the most free CPU cyclesGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="CpuMhzFree"; e={$_.CpuTotalMhz - $_.CpuUsageMhz}} | Sort-Object -Property CpuMhzFree -Descending | Select -First 1
    
    ## get the host with the most free memoryGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="MemGBFree"; e={$_.MemoryTotalGB - $_.MemoryUsageGB}} | Sort-Object -Property MemGBFree -Descending | Select -First 1
    

    The first would have produced something like:

    Name          CpuMhzFree
    ----          ----------
    myVMHost0          25384
    

    And the latter didn't would be out:

    Name           MemGBFree
    ----           ---------
    myVMHost4        122.323
    

    .. .or each of these host computers are those with the most free memory/CPU cluster, respectively.  What to do the things for which you are looking?

  • M4: Regulation of the CPU power and fan - tablet is running hot and noisy

    My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

    Is this normal?

    Also my M4 allows on occations to memorize the fan.
    Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
    However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
    Yourself or others behave the same?

    Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
    (http://www.pbus-167.com/)

    East of problems common to the M4 or Tecra series?

    GeirS

    Hello

    If the operating temperature of the machine goes upward, so that the cooling fan turns on.
    Many parts for example produce a lot of heat from the graphics card.
    In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
    If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
    You can believe me :) It's not a fault!

    If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

    Best regards

  • iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

    Hello

    My iMac (late 2012 if I remember) restarts when under heavy load for a while.

    I work a lot with Final Cut Pro X.

    Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

    Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

    I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

    Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

    How can I understand what is happening?

    Thank you very much.

    Thomas

    First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

    If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

  • Dell Precision 490 CPU Upgrade

    Hello

    My Dell Precision 490 currently runs 2 x Intel Xeon 5130 (Woodcrest) 771 socket LBA.  The Intel Xeon 5160 next would be compatible with my system. My mobo is ODT031 / 5000 X of Chipset / 6321ESB Southbridge.

    Server Intel Xeon 5160 3.0 GHz dual core Socket 771 CPU SL9RT 4 M/1333 64 - bit

    Type of CPU / microprocessor
    Server market segment
    Family Intel Xeon 5100
    Model number? 5160
    CPU HH80556KJ0804M reference numbers are a microprocessor tray/OEM
    BX805565160A is a microprocessor in a box
    BX805565160P is a microprocessor in a box
    Frequency? 3000 MHz
    The bus speed? 1333 MHz
    Clock multiplier? 9
    The package 771-land Flip - Chip Land Grid Array (FC-LGA6)
    1.48 "x 1.48" (3.75 x 3.75 cm)
    Socket Socket 771 (LGA771)
    Introduction date 26 June 2006
    Price at introduction $851

    S-spec numbers
    Production processors of'RE / QS
    Part number QLUF QOXI QTII QXQT SL9RT PLATE SLAG9
    BX805565160A +++
    BX805565160P +++
    HH80556KJ0804M +++

    Architecture / Microarchitecture
    Core microarchitecture
    Bensley Platform
    Cranberry Lake
    Glidewell
    Core processor? Woodcrest
    Review of basic? B0 (QLUF)
    B1 (QOXI)
    B2 (QTII, SL9RT, SLABS)
    G0 (QXQT, SLAG9)
    CPUIDs 6F6 (SL9RT, SLABS)
    6FB (QXQT, SLAG9)
    0.065 micron manufacturing process
    Data width 64-bit
    The number of cores 2
    The number of threads 2
    Floating Point Unit integrated
    Level 1 cache size? 2 x 32 KB instruction caches
    data cache 2 x 32 KB
    Level 2 cache size? 4 MB of shared cache
    Multiprocessing up to 2 processors
    With MMX technology
    SSE
    SSE2
    SSE3
    Extended Memory 64 technology (EM64T)?
    Virtualization technology?
    Execute disable bit?
    Power mode low features HALT
    Extended halt mode
    Stop grant mode?
    Enhanced SpeedStep technology?

    Thermal/electrical parameters
    Nucleus of V? 1V - 1, 5V (B2 Stepping)
    0.85V - 1, 5V (G0 stepping)
    Minimum/Maximum operating temperature? 5 ° C - 56.5 ° C (B2 Stepping)
    5 ° C - 60.7 ° C (B2 Stepping)
    5 ° C to 65 ° C (G0 Stepping)
    Maximum power dissipation? 130.83 watt
    104,84 watt (continued)
    Thermal design power? 65 watt

    Notes on Intel HH80556KJ0804M
    The bus frequency is 333 MHz. Because the processor uses Quad bus Data Rate effective bus speed is 1333 MHz
    Part BX805565160A includes 3U + active / passive thermal solution 1U
    Part BX805565160P includes the 2U passive thermal solution

    I tried an Intel x 5365 and it remains as a CPU not supported. I'm under revision of BIOS A08. There is sauce more involved magic, such as a general release BIOS rev no?

  • Windows 7 works with the Dell Precision 670 computer?

    I have a Dell Precision 670 workstation. It came with Windows xp x 64. I later upgraded to Windows Vista Ultimate x 64. The only problem I had at the time is that the host SCSI controller is not recognized by Vista. I used the XP x 64 drivers for the scsi controller and worked well. I want to upgrade my Vista x 64 to Windows 7 x 64. Everything else does? Doing a job? The Windows 7 Upgrade Advisor reports the controller scsi HD as an unknown (just under the name Vista Upgrade Advisor).

    The HD controller is an embedded controller the Adaptec SCSI HostRaid (Ultra320). I was not able to determine the model # of the controller.

    A representative of Micorsoft with what I discussed this said as a general rule, if your hardware works with Vista service pack 1, you're usually good to go.

    On the Dell website, it lists the 690 as working with Windows 7. It is a similar job, but I can't say with certainty how similar.

    I saw him last night. I'll look over it.

    Dave.

  • The processor high/weird CPU usage and about 20 to 25% system interruptions.

    Hello

    I use an AMD phemon IIx4 965 processor. (never had proplems with this till now.) One of its mainstays bed use ranging from 70-99% in Task Manager exercising while the other 3 are normally working / reading normal numbers. The question comes at random, but won't go away unless I restart my computer. This problem arises in a week a go, I was playing a game in steam when I noticed the drastic performance to fall and began studying. The question, something just when im not playing. I use my computer mainly on the game. The computer slows down because of this. I have no idea what the cause. Help?

    Procexp said interruptions system 20-25. According to CPU - Z and CrystaldistInfo my HARD drive temperatures are all normal, around 28 - 38 c idle.

    Reasently, I got a new case for my computer parts, I removed and passed my components of my old case to a new. I tried to be careful and I know (I know) thinki. enough computers to do this by myself. Fifi, it done once in the past. I have read the instructions and put / connected all the wires and parts according to them. The machine started normally. No problems. This could cause this problem, is a thread in the wrong place? I do not know.

    I used free versions of Windows security essentials and Spybot search and destroy, Avast kernel tdsskiller to search for viruses and malware. All this happened in own. Can he still be a virus or something?
    Used more claire Wise registry and Ccleaner but noting alarming is come to the top, (again I think.) some things Yes, but breaking the ' fix claim has pursuant button has not set a cpu problem.

    First I though its my GPU causing the problem drivers. (google said) Approximately 45 days only a go replace my old AMD for a new R280 AMD Radeon 6950. Allworked very well so far. I found that according to Unknown Device Identifier I had older drivers still on my machine. I had trouble removing the old drivers, but eventually I had to use an uninstall program display driver for getting rid of them and now I only see one set of drivers. This has not fixed the issue of the use of the cpu.

    IM lost, at the end of my skills (mainly google-fu). Can someone help me? I hope this is the right place for this post, if it isn't then I apologize.

    If you want me (hopefully) post set and whatknot please first tell what program for and where to find it.

    Card mother 790GX-G65 (MS-7576)
    CPU AMD phenom II X 4 965
    AMD Radeon R280X 3 GB DDR5 XFX video card
    BenQ E2420HD 24 "1920 x 1080 resolution 75 Hz LCD monitor
    8 GB RAM DDR3
    Series of smart Power Supply Thermaltake M85OW EU

    I've updated all the drivers on the site of manufacturers on my motherboard side touching the BIOS and embedded PIDE/SATA drivers. Updated my drivers for Audio embedded, embedded LAN Drivers, System & Chipset drivers. (smarter people said that could set).

    Until writing this no problem has arisen, all works fine now. Procexp said system interruptions are now less then 2, compared to the previous 20-25 it is a sign that the update to fix the problem. It seems that this problem corrected everything. It turns out that all i needed was updated drivers thees. Everything works fine now... for the moment at least. Live and learn.

    Thanks for the time and effort you took to look for it.

  • Dell Precision T5500 CPU upgrade

    I did research on it and since I am not so material informed computer I think I must ask. There the mobo of 0D883F with processor E5504 (x 2). I want to upgrade to the fastest and most possible souls. I considered buying an opportunity T5500 and swaping the processor (the cheapest option), but there are so many different processors in of T5500 used even if finding the mobo specs show that compatibility for the 5500 series cpu. Found a T5500 used with (x 2) of the X 5650 and six cores that would be great for my work in Maya and of multiple Assembly photo/video-3D work. This could be the best option, so I can swap the cpu to my system, but I'm not sure what he would actually need exchanged. The 6 processor is 95w TDP and E5504 80w. Anyone know if this is possible at all? and what I would need to swap? I don't even know if the mobo is the same as one used, but looks in the images. Can I run a TDP 95w cpu on my mobo which now has 80w CPUs? Thanks a bunch

    Yeap, you can learn more about here (especially on the second page of comments. First page has more photos and other things): http://en.community.dell.com/support-forums/desktop/f/3514/t/19370823.aspx?pi21953=2

    But the important thing is that the radiator main stock of aluminum is bad. Actually, it's a low-end model (according to Dell) and the radiator from the main processor performance is U016F part number. They are very easy to find on ebay (for $15). In any case, this fixed the overheating problem of mine with the dual cpu x 5650. I've actually put the 5675 x in my other T5500 and it still works a little warmer than the x 5650 but very manageable compared to with the heatsink in aluminium (number T021F). There is not much difference in the 2 cpu (both running 6 cores and 95watts) with the exception of the clock speed. In my tests with Maya, the difference in performance between the 2 is minimal. As for the difference in motherboards? I still have no idea. Dell could not even meet this other that the most recent jury having a "C2" little matter that is. We thought it would not change the cooling to the Board of Directors at all, so the main culprit was the primary heat sink. It is just difficult to track because things are not too logical (at least to me). System monitors, I used (3 of them) showed overheating cpu was #1 (which numbered #1 and #0) make me believe extension (secondary) cpu was overheating one. Dell Diagnostics was stressing cpu #0 and monitors showed the cpu #1 heating upward. I go crazy. Finally, I pulled the riser (effectively making it a computer single processor) and confirmed that the principal was a overheating. This main heater is the problem and you should definitely use the largest radiator of U016F (better) on the primary no matter what. The extension, there is no option to change what I can find. There was only one option, I think that for the T5500 T7500 both. If we wanted to move to the X 5680 (race 135watts), I think the two cpu overheats and would not be able to be cooled by the heat sinks in the system. But I would be wrong in this regard. I think x 5680 are the fastest cpu we could put in these systems (on these mobos anyway). I hope this helps.

    Mike

  • Have the doubt by assigning CPU socket and carrots.

    Hi all

    Recently, I saw a Windows server 2008 R2 in my environment to have 4 taken with 4 each (average 16 Cpu core).

    I can also see them in windows host device manager. Now I am confused as the support for Server 2008 R2 STD up to 4 CPU only version.

    They will work with it. or there will be changes in the physical or virtual processor architecture and not taken care of the windows processor.

    If I missed something here. Please let me know.

    Attaching screenshot.

    Thank you

    Anjani Kumar

    Windows Server 2008 R2 can have up to 4 CPU sockets, each of these jacks may have multiple cores on them

    http://msdn.Microsoft.com/en-us/library/ms143760%28V=SQL.105%29.aspx

    Windows Server - Sockets, logical processors, Symmetric Multi Threading - Matthijs - Site Home - TechNet Blogs blog

  • HP Pavilion cv6t - 6 c 00 Quad: fix for CPU-heatsink and fan replacement

    Radiator fan is a lot of noise at the start up and I need to know that is I need to order.

    Processor is Intel i7 - 2670 m

    AMD Radeon HD M 7400 series

    Intel HD Graphics 3000

    Hello @LightKeeper,

    Thanks for the reply!

    With switchable graphics that you have listed, it seems you have 1024 MB of memory separate. Looking at the chart patterns on pages 3-4. Use this information in accordance with the information of the fan page 83, the part you are looking for is: 665308-001.

    You can use this part number with the HP parts surfer and other websites selling part computer.

    HP part Surfer

    If this information is useful, click on the thumb upward.

  • Is the Dell Precision T7400 support 64 bit platform?

    OK, my company bought the machine above, which has the double hearts Inet Xeon E5410 2.33 GHz CPU and 16 GB of RAM and 3 500 GB SATA HDD, as it should be my virtual machine.

    I installed Ubuntu 9 64-bit as well as 2 VMServer.

    I created a VM XP 64-bit, HARD drive, but when I booted from its ISO, Windows says it wasn't a 64 bit system?

    VMWare does support this 64-bit system, as its tool of 5.5 detection PDF lack the correct command for linux?

    If it is supported in Windows but not Linux, well, at least I can still use it like a virtual environment.

    Hello

    According to the information that you gave, your machine supports 64-bit CPU comments, but:

    You have activated VT settings in the BIOS of your host? If this isn't the case, you must do.

    You must enable "trusted execution" (if it is present in your BIOS).

    You have to cold reboot after that.

    J.

    You can read Re: problems installing Windows Server 2008

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  • XP Home: What are the causes of 10% CPU usage and how to reduce this happening?

    Hello

    Quite often my PC experience this problem right after the start or in the middle of surfing. The system stops responding and I have to often press CTRL ALT DELETE and restart my PC. My RAM is 1.5 GB is sufficient for private users with multitasking very minimum at any time.

    I would appreciare if someone could advise me on what are the possible causes and how to minimize if happen.

    Thank you

    Low

    Hello

    Quite often my PC experience this problem right after the start or in the middle of surfing. The system stops responding and I have to often press CTRL ALT DELETE and restart my PC. My RAM is 1.5 GB is sufficient for private users with multitasking very minimum at any time.

    I would appreciare if someone could advise me on what are the possible causes and how to minimize if happen.

    Thank you

    Low

    UH... Do you mean by chance 100%? If this isn't the case, then there is no problem.
    Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

Maybe you are looking for

  • Remove phone number of iMessage

    Hi all I enabled iMessage on my Apple ID, that I use on my iPhone and my Macbook Pro. I added my mobile number to my Apple ID. I configured iMessage on my Macbook so I can only be reached on iMessage via my Apple ID address. I want to implement iMess

  • Questions about the international warranty

    Next year, I'm going to study in Germany but I can't stand the QWERTZ keyboard and the price here, so I intend to buy a HP G42 of Singapore. The problem is that I don't know if I had received a guarantee international (for the use of the Services of

  • Install Vista as virtual machine

    I recently bought a complete sales of Windows 7 install Microsoft. Is it possible to install this on my Toshiba and legally install Vista (currently installed in Toshiba OS system) as a virtual machine. I guess that since Vista provided with the lapt

  • INSPIRON All In One 20 - black screen when you power on

    I have an Inspiron 20 model 3048.  The machine has been completely cleaned.  I wanted to install Windows 10 on it.  Powered on, the screen of the BACK came with the opportunity to make Windows 10 because it was installed there before he wiped.  One o

  • How can I change an icon for the device in Windows 7?

    How can I change an icon for the device in Windows 7? In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.