The dependency service or group was able to start. DHCP client service.

My computer will basically not connect internet by cable or wireless. Network adapters seem to have gone haywire. Ive done several system restores and even a sfc has to analyze in the command prompt. He said "Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. "Journal >" etc.
It would seem that I corrupted with Vista. If I restore these files or what I have to do my second recovery system? Any help would be appreciated.
Thank you.


ALU is ASUS Live Update, so you should check with the manufacturer ASUS and system and/or generator as you have
in fact to be material errors.


You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
You can use another DVD that are not protected but you will need to copy you have the product key.

On-site upgrade

This tells you how to access the System Recovery Options and/or a Vista DVD

How to perform a repair for Vista Installation

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

    the dependency of the orgroup faaied to start service unknown Internet connection.

    The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help


    ·         You will remember to do recent changes on the computer before this problem?

    ·         Is the question only for the icon network did you try to open a Web page and check?

    ·         What suggestions do you have tried?

    ·         What is the exact error message?

    ·         Have you tried all the steps from the link?

    I suggest you follow the steps mentioned below:

    Method 1:

    Follow the steps in the link and check if the problem persists:

    Registry warning:

    This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

    Method 2:

    If the previous step fails, follow the steps in the link and check if the problem persists:

    Method 3:

    If the previous step fails, reset WinSock and check if the problem persists:

    Registry warning:

    This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

    Method 4:

    Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

    Note: make sure that you enable the antivirus software, other security and firewall programs.

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

    original title: cannot share internet

    I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

    "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »


    You can view the article in the Microsoft Knowledge base and check if it helps.

    Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" "

    Let us know if you need more assistance.

  • Error message: unknown connection state. The dependency service or group was able to start.

    I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless.  I get the error message: unknown connection status. The dependency service or group was able to start.  I know that the router and the wireless work.  I tried several of the mentioned patches, but nothing has worked.  My Verizon card works.

    Hello Chelen,

    I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:
    This response may be useful:
    "I also had the same problem and the solution above does not work.

    My problem was caused by corruption in the TCP/IP stack

    To fix, you need to run a command as administrator prompt

    Start > all programs > Accessories > prompt (right click and run as administrator)

    At the command prompt, type: netsh winsock reset

    "Ignore all errors, restart and voila'.

  • Connection status: unknown. The dependency service or group was able to start.

    Greetings!  I have a year old Dell Inspiron.  Everything worked fine last night, but when I woke today I couldn't connect to the internet.  When I put the cursor on the network icon, it says "connection status: unknown."  The dependency service or group was able to start. "My Windows Firewall is also disabled and I can't activate it automatically or manually.  In addition, the Windows Diagnostic tool cannot be turned on, and whenever I try to activate the Diagnostic Policy Service it also can not be done. It says "error 5: access is denied" when I try to turn it on manually.

    My antivirus (Avira) software is fully up to date from last night.  I even took it into Best Buy and they did a diagnostic test to ensure that a virus is not the cause.  The guy there said it was a software problem.  I tried resetting TCP/IP (netsh winsock reset) without success.  I also tried sfc/scannow in safe mode and windows without success.  Are there other options?

    Thanks in advance.

    Restore point:

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    Mick Murphy - Microsoft partner

  • [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

    So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:


    The dependency service or group was able to start.

    Thank you: D-Patrick

    Please run a check of system files (SFC) & DISM if you're on win 7 or higher 

    All instructions are in our Wiki article below... If you have any questions please ask us.
  • "dependency service or group was able to start.

    I have a laptop with vista. my wireless connection is explained by limited access internet and the icon in the launch area shows "dependency service or group was able to start.  I have internet, so I don't know what that means.


    I suggest you to refer to this link and check if it helps:

    It will be useful.

  • When you try to share my internet wireless connection I get this errordependency service or group was able to start

    When I try to share my internet connection, I get the following error. dependency service or group was able to start

    Hi Jason,

    1. What is the brand and model of the computer network adapter?

    2. How did you try to share the internet connection?

    Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest you make sure that the slot addiction services are enabled.

    a. Click Start, select run, type services.msc and click OK.

    b. to activate a service, look for it in the right pane, double-click its entry.

    c. do not forget its Startup Type is set to automatic, and then click OK.

    All the following services must be so configured to use ICS:

    Application Layer Gateway Service
    Network connections
    Knowledge of the network (NLA) locations
    Remote Access Auto Connection Manager
    Remote Access Connection Manager
    Remote procedure call (RPC)

    After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

    I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

    I downloaded the installation package full & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

    c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
    The dependency service or group could not start

    Any ideas?

    You may need to temporarily disable your security software (antivirus).

  • The computer browser Service 1068 error - dependence or the Group was able to start

    I hope you can solve a problem that I'm trying to solve for 2 weeks or more.

    My small house nat network - XP Home - was working fine then I found I could no longer see / access files remotely on my network. The other PC can see and access my shared files and the other pc, I can ping and Internet access is ok. 

    Inspection services do not start: - computer browser, desktop and Netlogon - any attempt to boot from the Administrative Tools / Services results an error 1068 - dependence or the group does not.

    I ran the network set up wizard, and I tried to reinstall the network adapter and the drivers but no change. I checked the Web sites and sought suggestions; I checked the registry and dll for as suggested in the articles, but have found nothing.

    Any suggestions would be welcome and thank you for your time.

    Kind regards

    Bob D UK

    You must start the dependent services. Dependent services are workstation and server. I think that you start the workstation service.

  • Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

    I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

    I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

    «OMG 911techmedics...» You're crazy GENIUS!

    Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

    What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

    I tried:

    (1) Microsoft Winsock32 Fix
    (2) replacing Winsock dll
    (3) Yes Netsh wlan with the set command
    (4) order of Netsh reset catalog
    (5) LSP Fix.exe
    (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

    I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

    Step 1: Click the button START
    Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

    Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
    Step 4: Next, choose 'SYSTEM', is expected to increase again
    Step 5: Choose "CurrentControlSet", develops again
    Step 6: Select 'Services', develops into a great big list of things

    Step 7: Click on "Dhcp", the right window shows the files in this folder
    Step 8: Double click on "DependOnService".
    Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

    Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
    Step 12: Delete everything in the text are and click OK. You are finished.

    Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

    Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

    911techmedics saved our skins...

    Thank you!!!

    The Lady Sharrow...

  • Unknown connection status: dependency service or group was able to start

    I started getting this error a few days ago, and I've tried several different Web site solutions

    Replace the nlasvc.dll, as it was suggested that this had become corrupt. No solution.

    Reset the TCP/IP stack

    I ran sfc/SCANNOW in the administrator command prompt and it did not work.
    I tried this, then in Windows started normally and start mode without network safe.
    All to nothing does not.

    I don't have the Trend Micro Antivirus software installed.
    Initially I had Panda, but at random that no longer works, so I then installed Kaspersky.
    Everything worked fine for a while now, I have this problem, which is different from the other problem I had with Panda.
    I tried to uninstall Kaspersky, and still no internet connection is available.

    Any additional help / advide, greatly appreciated.

    Hi KarthiK TP

    Thank you for your response. Unfortunately, it came too late, and I'm done to restore factory settings.
    This solves the problem.

    Just to let you know, the step where we had problems is this awareness network (NLA) location. I was getting an error message whenever I tried this step.

    That this step did not work, I wouldn't have been able to run all analyses of the viruses online, as I had no internet access.

    In any case, I have Windows 7, if all goes well, it is more stable.

    Thank you

  • I used administrative services to change my share on automatic. I have applied these changes and click Start. I had a dependency service 1068 error message or group was able to start.

    I use Bell Fibe 25

    My computor is running on the windows xp proffesional 64

    Also don't see xbox 360 image in the area of media sharing in windows media player


    Hi DougGowers,

    Follow the suggestions below for a possible solution:

    Method 1:  When the "Error 1068" error is logged, view the dependencies for administrative services tab to ensure that the services that rely on administrative services are not stopped. To view the Dependencies tab, follow these steps:

    a. click Start, click run, type services.mscand click OK.

    b. right-click on administrative service you wish to view and then click Properties.

    c. click the dependencies tab.

    If the service that depends on the Administrative function is stopped, right-click the service in the Services console, and then click Start. Then, try again changing administrative service.

    Method 2:  Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Start and click run, then type cmd in the box start the search.

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompt, the following line and press ENTER:


    For more information, see the article:


    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)


    File system (CFS) Checker

    You can also see the following articles for more information on sharing media with Windows Media Player:

    Share your multimedia files


    Listen to music from your computer to Xbox 360

    Let us know if that helps.

  • service or group of addiction was able to start; Cannot start the diagnostic policy service

    I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

    Hello, Lesley

    Thank you for using the Microsoft answers Forum!

    The following information is taken from:

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

    It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

    Let us know if that helps.

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Print Spooler error 1068: the dependency service or group could start. __

    I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

    Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

    When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

    Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

    You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

    Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

    Use the Applet of Services XP to check the dependencies of print spooler and options.

    Click Start, run and enter in the box:


    Click OK to open the Services Applet.

    Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

    Dependent Services may vary according to the type of printer that you have installed.

    The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

    If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

    Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

    Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

    When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition

    If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

    Click Start, run, and in the box type (including important space after the "equal" sign):

    dependent on the spooler of sc config = RPCSS

    Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

    If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

    Don't forget to restart and check that everything works correctly after each adjustment.

    Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

    The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Maybe you are looking for