the desktop icons and labels are not transparent

the desktop icons and labels are not transparent

Hello

· Were there any changes made on the computer before the show?

You can check out the post below which deals on the same concern: http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

Tags: Windows

Similar Questions

  • The desktop icons and taskbar are at least three minutes to load when I start the computer.

    Original title: problem with the desktop icons

    All of a sudden when I start my computer, the icons on the desktop and icons at the bottom of the clock of the take at least three minutes to load, and before that time, they used to load in a few seconds.  Also, I have no problem with the computer start.  Any help to solve this problem will be greatly appreciated.

    According to the specifications of your system, hard drives on your system are disks IDE (not the SATA drives).

    Sometimes the Interface IDE mode can change from DMA mode to PIO mode and when that happens, things sudden. run very slowly, but it is easy to check and adjust if you need to.

    Here's how:

    If you are using IDE drives, use Device Manager to check the channel Transfer Mode IDE is set to something like DMA if available (depends on your hardware) and the slow PIO mode.
      
    Don't forget: PIO is the slowest, DMA is faster.

    It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

    To launch the Device Manager console, click Start, run and enter in the box:

    %SystemRoot%\System32\devmgmt.msc

    Click OK.

    Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

    Faster selection will always be a kind of selection DMA (usually: DMA DMA5, UDMA, etc.).  If it is PIO, change it to DMA.
      
    If you are unsure of what you see after return of help and advice.
      
    If you make settings, restart and check the settings again to make sure that any change stick.
      
    What may have caused the change?
      
    http://support.Microsoft.com/kb/817472

  • Tried to uninstall firefox but says must close first, click on the desktop icon and firefox does not open

    I was planning to install the new version, but it keeps telling me to close firefox first, click on the icon and nothing happens, is gone to internet explore and found Mozilla support but nothing listed there help
    Please help me with this problem, do not use Explorer

    Men of Firefox > File > Exit

    Open the Task Manager > processes and check firefox running in the background?

    ________________________________________________________________________________

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • I installed windows 7 and the desktop icons and bar tasks are enormous

    Original title: Windows 7

    I installed windows 7 and the desktop icons and bar tasks are enormous, go to Web pages, I have to use the scrollbar at the bottom of page to see the other half of the page - he said could also be a driver problem, but don't know what I'm looking for - someone can help?

    Hello

    Yes, well part of the problem from the point of view of Dell is the only "acceptable" operating system for the Office of series 4600 XP. So they have no drivers 'official' for any function of Windows 7!

    But first I need more information on the video card. Try this (on the Dell site): 4600 system is supplied either with the built-in car video or a dedicated real card video.  You should know that you got.  Right-click of your mouse on the desktop, click on Properties in the next area, you see.  This will bring you into the display properties.  Now click on settings at the top right of this next area, click Next on the advance .  Now, click on the adapter on the top.  Just below the upper on this last box, you will see your listed video adapter.

    You will need this information, regardless of where you get help. My best recommendation is that you go to the community of Dell and after a question here. Someone may have already found one, but there is nothing official since the operating system is not officially supported.

    I'm sorry, there is nothing more I can do.

    Kind regards

    BearPup

  • Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

    Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

    The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

    Hi,

     

    Thanks for posting your question in the Microsoft Community.

    From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

    I understand the inconvenience caused to you. I'll help you solve the problem!

     

    Before troubleshooting, I have little information on the issue.

    1. did you of recent changes to the computer before this problem?

    Try the methods suggested in the article below and check after each method:

    Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

     

    Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

    If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

    It will be useful.

  • I downloaded CreativeCloudSet - Up.exe. When I double click on this file. Adobe Creative Cloud installs the desktop icon and the program tries to open but don't ever completely. The turning turn (for hours), but the program never opens?

    I downloaded CreativeCloudSet - Up.exe. When I double click on this file. Adobe Creative Cloud installs the desktop icon and the program tries to open but don't ever completely. The turning turn (for hours), but the program never opens?

    Hi J.derrick,

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    Kind regards

    Sheena

  • The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

    I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

    I can bring up the Task Manager and manually run programs, etc.

    Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

    I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

    I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

    Hello

    This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

  • Windows 7 64 bit, start slowing down, the desktop icons and taskbar of loading very slowly since last week!

    so first, I'll start with my system features:

    Reference Dell Xps15z
    Intel Core i7 - 2640M to 2.8 ghz
    NVIDIA GT525M 2 GB
    8 GB RAM
    Windows 7 Home Premium Service Pack 1 64-bit
    Samsung PM830 SSD 2.5 "7 GB 218, 42 GB of free
    My laptop is now just a year and plays well outside some blue screen errors that have been fixed. The question now is time to start being significantly slower, especially the loading of the office. It takes 15 seconds to the password screen, to 45 seconds to reach the office and another 45 seconds to the taskbar, icons and things on the desktop to load. What is unusual is that during this black screen, my mouse is displayed, as well as for Advanced System Care 6 performance monitor (I doubt that this is the problem as I had installed for some time). I did the troubleshooting on mine and removed about half of my program without success. I also checked the health and performance of my SSD with SSD and SSD life and both seem to be very positive. I did not any changes to the Bios because I don't want to reinstall my OS and I'm not really sure on workarounds.
    I tried also to the difficulty of the task of explorer.exe, by checking the value of shell in the registry and it is correct, that it just load slowly at the start and each time I kill and then open it again in the Task Manager. Therefore, I think that my main problem is with explorer.exe loading slowly for some reason, I also removed some desktop icons and taskbar, although I doubt that it makes much difference.
    I've also done many scans with malware bytes pro and hitman pro, there is no virus on my computer.
    I appreciate any help, as it is very inconvenient for my more than 90 seconds start time, when he was about 20 when the laptop was new.
    Thank you very much for your help!
    P.S. I have about 60 GB of games installed on my pc via steam, if it makes a difference to delete some

    When my Windows 7 is slow to start, I do the following:

    Start, then in the search box, type of race. In run, type "msconfig"(sans guillemets), and then click OK. ""
    In the general tab, make sure that selective startup is selected.
    Under Selective startup, clear the check box load startup items.
    Then go to the Startup tab and disable everything except software antivirus and important such as the microsoft. In addition, DO NOT disable any program that you do not recognize.
    This will disable any unnecessary background programs and prevent to launch at startup.
    NOTE: you can still start programs even if they do not start at startup. For example, your favorite game is one of them, and you the disabled. Now, the game does not start at startup, but if you click on the game icon later, it will always start, except maybe a bit slower when it starts. Basically, you are delaying the start of programmes which does not need to start at startup, you move a part of the start-up BACK period. The only programs that you do not disable is programs that actually need to start (like if it starts your computer will blow or something similar).
  • Click on the Photo icon and it does not open. I recently downloaded and installed El Capitan and it seems to have slowed things. How can I solve this problem?

    I click on the Photo icon, but it does not open. I recently downloaded and installed El Capitan 10.11.5, and I wonder if it is slow things down.  My iMac has 2 GB of memory and 124,75 GB of free space. Picture worked fine, then I wonder what is happening. Can anyone help?

    Yes, it's probably slow things down a GB of s2 on memory is the absolute minimum - you need to update your memory which is cheap and easy - a reasonable and a reliable source is Other World Computing- there are others including Apple

    LN

  • Satellite A300 - Satellite icon and touchpad are not lighting

    Hello

    I have a toshiba Satellite A300. When turning the power on it this morning I noticed the 'Satellite' icon and the touchpad are not turn on as usual.
    Always work normally but I'm sure they used to be illuminated whenever the laptop was switched on, or I'm not so sure now?

    Pls help me thanks

    Mar

    Can roll you back the BONE a day or two back to see if it works again. Use please tool of system restore and restore the operating system on time earlier.

    On my Satellite A300, it's always on.

  • Lack of the desktop icons and taskbar with Windows Xp on my Toshiba laptop, try to install windows XP Sp2 without disc

    I have a Toshiba laptop with windows XP SP2 installed. Now, all of my desktop icons and the taskbar may not be seen (hidden)

    Attempt to clean for result of virus... > no virus
    Tried creating new user... > the same

    The Explorer.exe file does not load at startup.
    Running in SafeMode... > no change
    Trying to repair XP and he says... > blue screen
    Tried to Format and reinstall Windows XP sp2... > NOT found HDD
    Tried Msconfig and disable the process running everything except Microsoft... > no results
    I tried to do all the things described in the Article ID: 318027
    What other thigs should I try? Help, please

    Check this box:

    http://www.kellys-Korner-XP.com/xp_tweaks.htm

    Taskbar Repair Tool Plus!
    http://www.kellys-Korner-XP.com/taskbarplus! .htm

    Line #195 "restore desktop icons and taskbar."
    http://www.kellys-Korner-XP.com/xp_tweaks.htm

  • Desktop icons and program are corrupt and all link to Skype.

    Original title: Desktop icons

    My desktop icons and program have been corrupted and all link to Skype. Someone at - it solutions?

    Here is another possible solution:

    Restore the .exe file association:
    http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

    Excerpt:
     
    Download exefix_cu.reg attached at the end of this article and save it on the desktop. Right click on the REG file and chooseMerge.

    Scroll down to the spare section and click on exefix_cu.reg and follow the above instructions. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Thunderbird does not accept the user name and password, an error that the user name and password are not correct

    Thunderbird esteem username and password are not correct,

    Gmail account?

  • Computer starts normally but the desktop icons/Dowes/all are unclickable and cannot do something with them?

    My brother has recently installed FireFox on its Windows XP (the only recent change on this laptop). Last night my mother crashed the computer (the only thing she did apparently was click on volume control panel too often making it appear several times, and then go away, she then tried to open the shortcut on the desktop "internet explore", who then tried to load FireFox instead, as it has become the default value). From there on, the computer did not respond, and I could not close normally, so I had put out of service. Today, we have tried several times to use this laptop, but although it loads normally and the Mouse/touchpad moves correctly, we cannot click on any icons or the dowes or whatever it is is completely insensitive.

    Could someone tell me what to do?

    Ok

    Yes, it's more than enough RAM.

    Boot mode safe again and check all entries in msconfig to see from evry time you start.

    Start/run and type

    Msconfig

    Ok

    Startup tab

    Keep the page open, then click on the link below with your other machine. It will tell you what are all the entries and see if you can disable them or not. It will also identify malicious programs.  Turn off everything that is not necessary to run at startup

    http://www.SysInfo.org/StartupList.php

    Read the key at the top of page. Use the search box to check all your entries

    When you restart, you will get a message saying that you have begun in "Selective startup" click "don't show this message again" and then click OK

    Also check if there is a yellow speckles in Device Manager

    Right click on my computer/properties/hardware/Manager

    .

  • How to resize the desktop icons and fonts?

    I was working on my computer when I must have accidentally hit something and now everything is huge and I don't see even not all the icons on my desktop.  It's like I'm blind and everything is amplified. How can I change this back?

    Hello

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    try to get your site in manufacturere graphics or computer cards and find the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    THEN try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

    Text and images are sharper and smaller at high screen resolutions
    Text is larger and easier to read at low screen resolutions, but images are rasterized and number of items adapted to the screen
    1. Open display settings by clicking on the button start , by clicking on Control Panel, appearance and personalization, clickingPersonalization and then clicking display settings.

    2. Under resolution, move the slider to the desired resolution, then clickApply.

    Notes
    • When you change the screen resolution, it affects all users who log on the computer.

    • When you set your monitor to a screen resolution that it will not support, the screen will go black for a few seconds while the monitor returns to the original resolution

Maybe you are looking for