The development of two sites on a single machine

Similar Questions

• TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  Voila now I need to create a machine with a characteristic (two processor two NIC etc...) and the more important the two system c which will be disappointed the win XP and Win server 2003 I have a big prob to find how to do this (this is my problem)

• Get the double trigger using CreatePulseChannelTime on a single machine

  I use DAQmx in c# to monitor a TTL (wide 3ms) signal, wait a while and then send a pulse on the line of meter output (wide 1ms). I put it to be redeclenchables so that for each input pulse, I get an output pulse after the waiting period. It works like a charm on a single machine.

  On the other hand, I get two pulse output. If I change the value of my delay, the two impulses are delayed by levels, and their interval is exactly the width of the input pulse. Looks on the scope of the trigger occurs on both fronts and, even if I asked only the Levant.

  As a hack, I extends the duration of the pulse to 3ms output, so that he survived the trigger pulse. This solved the problem, but is not sustainable in the long term because it limits the rate, I can do this operation.

  Everyone knows this behavior, or have clues? My understanding is that the task will not retrigger until he sees another front, and that the falling edge will not retrigger it.

  Oh - we exchanged the PCI-6052E card by a new one, but the problem remains. This problem will NOT occur on a machine we built 6 months ago.

  Here is the code:

  _triggerTask.COChannels.CreatePulseChannelTime (_cameraCounterLine, string. Void, COPulseTimeUnits.Seconds, COPulseIdleState.Low, 0, _delaySecs, triggerLengthSec);

  _triggerTask.triggers.StartTrigger.ConfigureDigitalEdgeTrigger (triggerLine,

  DigitalEdgeStartTriggerEdge.Rising);

  _triggerTask.triggers.StartTrigger.Retriggerable = true;

  generate 1 pulse

  _triggerTask.timing.ConfigureImplicit (SampleQuantityMode.FiniteSamples, 1); _triggerTask.Control (TaskAction.Verify);

  _triggerTask.start ();

  Thank you-

  John Duddy

  We just thought to it - the Heisenberg uncertainty principle applied to the classical mechanics. The problem disappeared when we disconnected the oscilloscope. Without the connected frame, we had to deduce the problem disappeared (not), but I am convinced. It was the same scope, we used the last time, too.

  It's a good lesson - when occur contradictions, check your premises.

• With the help of two models on a single site.

  Im trying to design a Web site and because of my lack of experience, I went down the road of model. I have download two adobe model muse. I think my website on one of them (so it comes to a site), I want to use the second template as a new page to my site current Web how can I do this?  Thank you. If I have more complicated things, in short how can I use two templates in a site as two distinct pages.

  Hello

  You can configure two different master page, each with a model. See if it works.

  If you are not already aware of the page master, please take a look at this.

  Understanding master pages | Adobe Muse CC tutorials

  Let me know if you have any question.

• How do you find the average value of all the data between two points on a single channel

  I'm tring to calculate the average value of all data points in a single field between two distinct points

  I rasthaus an illustration.

  Hi smoothdurban,

  I thought you wanted to specify the area of interest with the sliders of the band.  If you rather automatically define the area of interest based on thresholds, etc., we cannot see the interactive nature of the example I sent.

  What are the criteria used to determine the start and end of the region of interest lines?

  I would be able to type this out for you if you sent a representative data set ([email protected])

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to retrieve information about the product of two sites.

  Hi all
  
  I try to get different products in two different places.
  
  A 'homeSite' Chair and the table of the site 'storeUS '.
  
  I get data from the site "storeUS" with table produId. No problem with that.
  
  But I'm not able to get information chair 'homeSite' site.
  
  Suppose if I move 'chair' to ' site 'storeUS', then I get info President.
  
  If I try to 'homeSite' site, then empty page displays, data does not come.
  
  Can you help me.
  
  Thank you and best regards,
  Murali.ch

  Activate loggingDebug for/atg/commerce/catalog/ProductLookup in dyn/admin component browser and you can get more information about what might happen. If everything else is fine, cause most likely failure here could be that the product you want to search for is not for the current catalog. You can validate this by adding the parameter open wrongCatalog to your ProductLookup.

  If this is the case of the catalog wrong then you need explicitly setting catalog also gout ProductLookup. Note that this parameter to the ProductLookup of droplets must be of the type of repository, so you have to resolve in the first catalogue through the post-search and then move the element output as the value to the parameter catalog catalog. It would be something like this:

  
    
    
    
      catalog is....
  
      
        
        
        <%-- OR  --%>
        
        
          
          
        
        
          WRONG CATALOG!!!
        
      
  
    
  
  

  I hope this helps.

• CS-3-Viewer - works in the development system - a site failure (not all)

  I looked at a number of topics of discussion on the CS - 3 view Image slideshow doesn't work is not on the Web site.  I have the AC_RunActiveContent.js file located in my folder of Scripts on the site.

  I correctly opperating slide shows working on the site - is a good page - http://www.billyandgracetea.com/Contact1.html.

  A slightly flaky page is - http://www.billyandgracetea.com/Photo1.html.

  And the page fails totally is - http://www.billyandgracetea.com/Summer2010-Pics.html.

  The page but which totally fails - working properly in my development system-, fails on the site.  It works properly with the Play button, and also when I compile the page with the key 12 function (although I wonder if I want to allow the Active X).

  Flakey page - does not always work through all the 18 sides - sometimes running 1 to 7, then return 1, etc.

  The file system for all html files is the same on the website.

  How can I fix the page that fails completely?  18 side in the puff page - too many sides?

  On http://www.billyandgracetea.com/Summer2010-Pics.html

  This path is correct?

  Which points to

  http://www.billyandgracetea.com/pictures/flashslide-3AA.swf

  File not found

• The combination of two columns in a single

  Hi guys,.
  
  Is it possible for a query to combine two columns into one? For example, lets say I have the following query:
  
  SELECT ID, FIRST_NAME, LAST_NAME
  EMPLOYEES
  
  I want the output to have two columns: one that contains the ID and the other containing name followed by a space followed by LAST_NAME. I know how to do this outside the query using coldfusion, but it save me a lot of work if there is some way that the query could do for me.

  Yes but the operand of concatenation varies somewhat from a database
  management system to the other.

  In Oracle, it would look this IIRC.

  SELECT ID, FIRST_NAME. ' ' || LAST_NAME AS FULL_NAME
  EMPLOYEES

• I followed quite the tutorial format, in the development of my site, but the image is passed.  No idea why?

  Did anyone mind having a look at my website, www.uniquehomedesigns.net, to see if you have any idea why the photo dropped?  I edited (smooth it), but I don't know if that had anything to do with it.  In any case, my sad little website looks even more sad with my photos misbehaves.

  As if I really know what I'm doing, I'll try to attach relevant files.

  You must remove the

  surrounding this third image in the right column

  However, by inspecting the code on the page, you have some problems.

  1. the central image is resized in dreamweaver, you really need to edit the image in a graphics program to make the actual size to use.

  972px × 611px (scaling to 316px × 237px)

  2. you should not use spaces in filenames, for example: (signs of average percentage of spaces in the file name).

  http://www.uniquehomedesigns.NET/images/paint%20jobs/paint%20pics/Tay%27s%20Room%20For%20W ebsite.jpg

  3. you have a rule in the CSS to:

  #column_container {
       float: left;
       width: 652px;
  }
  

  Yet, in the html code, you have the id without the underline:

  You need to fix it - and it will probably throw your page out I'm afraid... once again, you have to solve this problem if it occurs.

  Go back to the tutorial and recheck the code and compare it to what you have now.

• Certmgr.msc add the certificate to all users on a single machine

  I have a certificate for a Web site and I can install it only by using the local administrator, (for the local administrator account) that is to say: only the local administrator can go directly to the site that the certificate is installed.

  There are another 5 users who use the same machine and I would have preferred that they have not installing the certificate themselves due to problems of 'user '.

  Is it possible to install the certificate, either through of certmgr.msc or another method, to ensure that all users can go to this site without having to install a certificate?

  See you soon!

  Hello

  ·          5 other users to use standard accounts?

  If Yes, then you will not be able to install the certificate on it. Instead, you may need to use your administrative privileges to install the certificate on each user account individually.

  See: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/windows_security_runas.mspx?mfr=true

• Two clusters on a single machine

  I try to get two clusters different versions of coherence running on the same box. They have different groups names and addresses of the listener to different multicast but when I run the second group I get the following error:
  
  1117 [Logger@748080913 3.5.3/465p7] ERROR consistency - 17:52:28.094/1.431 2011-03-16 Oracle coherence GE < error > 3.5.3/465p7 (thread = Cluster, Member = n/a): this member was unable to join the cluster due to incompatibility between the Protocol of cluster used by this member and one used by the rest of the cluster. This is probably caused by an incompatibility of versions of coherence or protocol filters do not match (for example compression or encryption). Rejected by Member (Id = 1, Timestamp is 20:52:32.677 2011-02-16, address = 169.35.10.56:8088, MachineId = 32824, location = machine: nyl31a-2204-eth4, process: 18284, role = CsDatacacheWebService).
  1117 [Logger@748080913 3.5.3/465p7] DEBUG consistency - 2011-03-16 17:52:28.095/1.432 Oracle coherence GE 3.5.3/465p7 < D5 > (thread = Cluster, Member = n/a): Service de Cluster in the cluster on the left
  1121 [hand] ERROR com.cs.configservice.WebService - java.lang.RuntimeException: could not start the Service 'Cluster' (ServiceState = SERVICE_STOPPED, STATE_JOINING)
  
  The first group (v3.6.1) does in his substitution:
  <>cluster-config
  < member-identity >
  < name of the cluster system-property = "tangosol.coherence.cluster" > DATA_CACHE < / cluster-name >
  < / member-identity >
  < multicast listener >
  < time-to-live-system-property = "tangosol.coherence.ttl" > 1 < / time-to-live >
  < system-property address = "tangosol.coherence.clusteraddress" > 239.193.112.8 < / address >
  < port system-property = "tangosol.coherence.clusterport" > 35000 < / port >
  < / multicast listener >
  < / cluster-config >
  
  The second (v3.5.3) has this:
  <>cluster-config
  < multicast listener >
  < time-to-live-system-property = "tangosol.coherence.ttl" > 1 < / time-to-live >
  < system-property address = "tangosol.coherence.clusteraddress" > 239.193.112.12 < / address >
  < port system-property = "tangosol.coherence.clusterport" > 35000 < / port >
  < / multicast listener >
  < member-identity >
  < name of the cluster system-property = "tangosol.coherence.cluster" > CONFIG_SERVICE < / cluster-name >
  < / member-identity >
  < / cluster-config >
  
  I can't understand why they are not coexisting.
  
  Published by: MattS on March 16, 2011 11:26 - added version of information

  Hi Matt,

  I think you may need to use another port of multicast, too.

  Also, make sure that you are not substitute the different settings with the same value of substitution of property Java.

  Best regards

  Robert

• Two sites that I go to every day are not in a format of Web page on the screen.

  After the latest Mozilla update, there are two sites that I go to every day. These sites are not formatted in Web page format. For example, a site is my century e-mail account link. I can connect on e-mail, but the page that is displayed indicates and looks like a Microsoft Word document. The other Web site is my online banking Web site. No other site don't give me wrong.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Also, make sure that your security (firewalls, anti-virus) software is blocking the files or modify response headers causing Firefox to get the pages as text/plain instead of text/html.
  
  You can check that in tools > Page Info > general and in the net Web Console log (Web Developer > Web Console;) CTRL + SHIFT + K).

  • https://developer.Mozilla.org/en/tools/Web_Console

• I bought two subscriptions on a single account. The account is blocked

  ! I bought two subscriptions on a single account. The account is blocked

  What should do?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Advice on where to begins the development of the site

  Hello

  I am a new Web designer/developer and use Adobe tools, classroom in a book, and Lynda.com course to give me a crash course and I am fast learning. But asked me to develop a Web site that is out of my reach and need advice on where to start.

  The site will be an e-commerce site, with additional user interactivity options. If users will access the site, upload their own photos, crop and move, change fonts and add words to a product that they will then order and pay.

  I see two components here - the carriage portion and the portion of interactivity. The customer (Luckily, my sister-in-law, brother-in-law) also wants to be able to edit the site itself. On a level of professionalism, she wants to POLISH - a 9 on a scale of 1 to 10.

  I saw the information/tutorials on Business Catalyst, Cartweaver, PHP, Coldfusion, MySQL, AJAX, Spry, Flash, Dreamweaver, and Wordpress... and I am still a bit lost on which of the above focus on--or something else entirely?

  Can anyone recommend? I have CS5.

  Laurena

  Hello

  I will offer some tips from my experiences. I have already developed applications and location using Dreamweaver, and more specifically the MEASURE, which is now discontinued. If I you I would look at a PHP framework, they are designed for rapid development and are generally well supported by their respective communities.

  I would take a look at Codeigniter (it's free), offers a wealth of features, good security and a fairly gentle learning curve. There are plenty of tutorials and community support is top notch.

  You can continue to use Dreamweaver CS5 to design and with new features PHP it can also be used for development. I know your problem there are so many options, it can be difficult to go into a path without closng another, in the last 3 months, I focused on PHP, Codeigniter and jQuery with those three that I feel now I can do anything.

  Good luck

  Mike

• Why is there the databases for two Web sites in my appdata roaming default firefox profile folder?

  Www.fling.com _ C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\http_

                                                                                                                                                                        C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\https_cashier.bovada.lv_
  

  Two of these databases of site are 64 KB and io_temp.sqlite files. I want to know how they were created and what information is that are stored there. I know that my boyfriend goes to the website of bovada much, but want to know if he has information of personal connection stored for two of these sites. I know that they are not cookies because I saw the list of cookies and delete the and these files are still there. I really want to know if the only way that the sites Web could be in the folder because he saved intentionally information stored on these sites and if not, then why they are part of a roaming profile?

  Hello, I could not find any documentation on what the data in the profile or an io_temp.sqlitefolder - file would do in firefox (perhaps it was a first version of dom storage or indexeddb).
  If you have questions about the use of these sites by your boyfriend, you should probably talk with him directly about this, instead of finding an answer in this way...