the device has been disconnected or is not available

I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

Help, please!

Currently, my version of the MacBook has been OS X 1 10.11.4

its MacBook Pro OS X 10.11.4

Tags: Notebooks

Similar Questions

  • Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

    Original title: Auntie Photon

    Hi all

    I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

    Help, please.

    Hi Varun,

    Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

    Please help me with the following information related to this issue:

    1. You have installed the required software on your computer which came with Auntie Photon?
    2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
    • Press Windows Key + X.
    • Select Device Manager.
    • Check if there is no error or exclamation point under Auntie Photon.

    This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

    Please follow the steps mentioned below:

    Method 1: Run the hardware troubleshooter

    The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

    1. Press Windows key + W on the keyboard.
    2. Type the Troubleshooting in the search bar and press Enter.
    3. In the Troubleshooting window, click show all in the left pane.
    4. Click hardware and devices.
    5. Click right on material and devices and and select run as administrator.
    6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

    If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

    Method 2:

    Note: Make sure that the Auntie Photon dongle is plugged.

    Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

    1. Press Windows key + X on the screen.
    2. Select Device Manager.
    3. Expand the network adapter and right click on driver and select Uninstall.
    4. Restart the computer.
    5. Windows will automatically load the drivers.

    Step 2:

    You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

    Windows Update: frequently asked Questions

    You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

    Please answer us on the State of the question to help you further.

  • Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

    Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

    Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

  • Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

    I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
    Operating system: Windows XP Professional Service Pack 2.

    He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

  • HEX 0x8BBB0011 as the connection to the server has been disconnected

    Hello

    I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error

    "HEX 0x8BBB0011 connection to the server has been disconnected.

    The error or warning occureed while writing the following shared variable

    \\NW-cRio\NW Library\NW_Force_cal

    \\169.254.106.130\NW Library\NW_Force_cal ".

    A screenshot of VI is fixed, the NW_Force_cal is highlighted.

    After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.

    Please suggest a solution for this problem.

    Thank you

    Guilhem

    The error has explained the issue.  The network had problems that led to the server being offline.  How to solve this problem is to understand what is meant by "real time".  It's just another way to describe a deterministic calculation.  In other words, the program ensures that everything will happen within a predetermined period.  Order things to be deterministic, they must be controllable.  The most obvious way to break the determinism is to prompt the user for entry.  As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program.  In this case, we have a more subtle break of determinism.  Relying only on a network will break determinism.  It is not simply a way to ensure that the network is not getting hit harder than usual.  In this case, the network was down for a period of time long enough to raise an error.

    Here's where we get to fix things.  Once the error has been generated, the code to do with it?  The wire of the error is not used for anything else.  I expect to raise an error and stop the program.  Clearly this isn't the desired behavior.  So, why we do not use the wire for an error handling?  In case of error, you can connect the data locally.  When you cover the network, you can clear the log to the host PC that you usually use to collect your data.  This command removes the dependency of your network for the code works.  With the help of a more robust code solves the problem with the relatively easy error management.  Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.

  • Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

    Hi all

    Source:-elxcna (adapter Emulax CNA)
    Event ID:-129
    Error:-\Device\RaidPort1, restore the device, has been published.
    Server:-Server Rack, Windows 2008 R2
    Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

    Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

    Up to now steps below was taken but no luck:
    1. test Unit Ready has been disabled in the registry
    2 adapter ANC, fresh of zoning has been replaced.
    3 firmware and driver from the adapter of the ANC has been updated.
    4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

    Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
    This 129 February 26 event id error 03:00.

    Need help? :)

    Hi SabarnaDeb,

    Thanks for posting your query in the Microsoft Community Forums.

    As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • The session has been disconnected

    Hi all

    I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...

    then I put 2 servers esxi 5.1 and 5.2 venter/view

    then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below

    "Desktop load attention".

    Your desktop is loading too slowly. You may need to activate your VPN to connect.

    Click on 'OK' " "

    then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...

    After customer view fill the bar running, it shows


    "The Session has been disconnected.

    Lost connection to server. "

    value this juniper IP route default of the machine I need?

    Thank you!!

    wyldkao

    Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.

    If you still can not configure it correctly, watch the video that goes through him more in detail.

    Let us know what it was.

    Mark

  • \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

    Hello

    I have a DELL XPS 13 9343.
    I did a clean install of Windows 10 and downloaded the drivers from dell.com.
    I am also running Hyper-V.
    I'm repeated warnings in my saying system Envent Viewer:

    \Device\RaidPort0, restore the device, has been published.
    Source: storahci

    Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
    It's very annoying, and I hope there is a fix for this?
    Thanks in advance.

    I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

    First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

    Change 1 to 2 attributes

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

    And again change the attributes of 1 to 2.

    Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

    Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.


    Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

    Finally under "PCI Express" change "Link State Power management" to OFF.

    I hope this will help you.

    Good luck!

  • Podcast OGG resume problems when the device has been turned off and on again

    Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

    For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

    I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

    Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

    BTW, I'm using firmware 1.32.00 (latest as of this post).

    This seems to have been fixed with the latest firmware.

  • Micro works not properly, read tab display or interface (HDMI) digital output device has been disconnected

    Original title: unplugged... HDMI?

    So I have a laptop Vaio of microsoft. The microphone that was integrated into the laptop was working fine until recently. No, I talked through my laptop was able to hear me except through Skype. I search through my laptop and say something like in the playback than digital output device or interface (HDMI) was disconnected. I know very well that I unplugged it. Can someone please?

    Hello
    1 did you change on your computer before this problem?
    2. you receive an error message?
    3. What is the exact make and model of your laptop?
    4. are you able to record from Microphone?
    5. which version of the operating system is installed on your computer?
    What version of the operating system Windows am I running?
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
    Make sure that the Microphone settings are set up correctly.
    a. right click on the Volume icon in the notification area.
    b. go to recorders and right click on the empty area.
    c. Select Show disconnected devices and show disabled devices.
    d. right click Microphone, and select activate.
    e. Microphone right click and select Properties.
    f. Select the option use this device for the use of the device falling down.
    g. go to the levels tab and move the slider to the maximum level.
    h. click on apply and OK.
    See also:
    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  • virtual serial port (offered by a USB device) may not be reopened once the device has been lost and reconnected

    To connect to a virtual serial port offered by a USB device.
    -Physically disconnect the device (disappears from the entry in Device Manager)
    -Reconnect the device. (It reappears in the Manager of input devices)
    -Close the file handle
    -Reopen the virtual serial port. --> the CreateFile() call always fails with "ERROR_FILE_NOT_FOUND".
    -After dis - / reconnect the USB device once, the serial port can be reopened

    Even the true return of GetDefaultCommConfig there yet in CreateFile().

    It is clearly bad habits, because in our case the disconnection/reconnection occurs due to a restart of the device; and it's quite embarrassing to explain buyer for the disconnect/reconnect the device.

    Is there another workaround solution to clean the window's internal data structures or show me how to open the port?

    Hello

    The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

    http://social.msdn.Microsoft.com/forums/en/categories/

  • Omen of HP 15-5000na: \Device\RaidPort1, restore the device, has been published.

    Hello

    My computer laptop freezing from time to time for 15-20 seconds (about 8 - 9 times per hour). When the gel it is impossible to make any disc operation, that is, open the file, or start the Explorer... the disk in the Task Manager activity is 100% reading.

    The only thing I found suspicious is a message in the event viewer / newspapers Windows / system that says:

    -------------8<--------------------------

    Source storahci

    Event ID: 129

    Text is: restore the device, \Device\RaidPort1, has been published.

    -------------8<--------------------------

    I search on google for that matter. I have set up my power plan high performance with settings for "PCI Express" / link state power management 'Off' (was befor change moderate energy economy)

    But this has no effect portable stell gel.

    I have no other choice for any type of RAID in my BIOS and my HARD drive is SanDisk SD6PP4M - 256 G-1006.

    SanDisk dashboard software indicates that the SSD is O.K.

    Windows 10 updates and drivers are up to date, also I flashed the BIOS to the latest version

    Any ideas how to solve this annoying gel are welcome, I will try all of them.

    Kind regards

    spetrov

    Hi go2.

    Thank you very much for the detailed information.

    I installed the hp support assistant and this software updated my drivers for more later you mentioned in you post.

    I can't find how to rebuild my raid (which I don't have) in the Intel Rapid technology software, there are only a few options awailable in this software and none of them can be used to rebuild the raid.

    However, I managed to solve this problem with the activation of additional options for power plan settings for hard drive

    named "AHCI Link Power Management - HIPM/DIPM" registry and then, after that the options are visible in the settings of the power plan, set options for DIPM (HIPM is not taken in charge of my hard drive).

    This link provides information how to activate this option of additional hard drive in the power plan settings and how to change them.

    http://www.SevenForums.com/tutorials/177819-AHCI-link-power-management-enable-hipm-DIPM.html

    Best regards, spetrov

  • I can check if the device has been jailbreak/sideload using c + c++ / qml?

    Hi all

    Are there ways I can check if the device (Z10) was jailbreak or sideload in my application?

    If yes how can I check for this?

    Are there any examples or tutorials is welcome.

    Thanks in advance.

    There is no jailbreak for bb10.
    as binary application cannot be extracted from the device a distributed world bb application is not available on sideload.

  • during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

    Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

    You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

    Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

  • Cannot get the notification if the client has been disconnected and then become online

    Hello

    I use notification service Pap BB and I have send a notification to the customer of BB and he got the notification correctly while it is online.

    But if I send a notification, while the mobile was disconnected , then again online , no notification received.

    Please notify

    Hello

    Just for future reference, try to avoid putting your device PIN, appid, password, and the full URL of PPG in your post on the forum.

    From your sample code, it seems like you were missing the initial "cp" right after https:// and before your content provider ID.

    The publicPPGAddress must be of the following form:

    https://CP {cpid}.pushapi.eval.blackberry.com/mss/PD_pushRequest where {CPID} is replaced with your content provider ID

    Let me know if this helps.

    Thank you

    Matt

Maybe you are looking for