the Device Manager has 3 printers for printing even on hpphotosmart more b209 a - m

Similar Questions

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• The Device Manager has yellow exclamation on other devices.

  The Device Manager has yellow exclamation on other devices. Peripheral unknown bus controller universal series (usb) 1) 2 SM bus controller) 3). No driver installed. No driver found on driver updates. Not causing no problem but I don't know what could be the devices.

  Thia article gives some indications - http://techforcommoners.blogspot.co.uk/2009/10/how-to-identify-unknown-devices-in.html its worth a read to see if it helps.

  Basically, it starts by looking for the hardware id in Device Manager and it enter the PCIDatabase to see if it can find all matches. It is sometimes useful in such cases.

  Another place to look is 'information system' (enter 'system info' (without the quotes) as the research) and look in there for pointers, esp in "components - peripheral problem."

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Bluetooth has disappeared from the Device Manager

  My computer does not detect bluetooth devices. I went to the bluetooth menu and unchecked and rechecked the boxes 'discovery' and so on. However, when I hit apply, the window became unresponsive and I forced to close. When I tried to repeat this, when you type apply I get a Bluetooth Service error message saying my device is disconnected (my bluetooth adapter is built-in). I went to the Device Manager and disabled the Microsoft Bluetooth Enumerator and generic adapter Microsoft to try to restart them. However, instead of just disabling, the owner made them disappear from the list (even show hidden devices will not bring them back). Now I have no bluetooth, the 'other' device any device and can not use bluetooth. I tried everything I can think and find on the net (reboot), update, etc.. Help, please!

  Vista Home premium SP1 running on an HP touchsmart iq770

  Hello

  Welcome to Windows Vista community responses.

  This problem occurs if one of the following conditions is true:

  • The Bluetooth support service has not been started.
  • The Bluetooth support service is not configured to use the local administrator account.

    Point of Bluetooth devices is not present when you open the control panel.
    http://support.Microsoft.com/kb/894035

  Click Start > right click on computer > Manage > Device Manager > USB controllers expand > right click and click on all the USB root hub and host controllers > restart if you are prompted or click check for material changes.

  Try to download bluetooth update from the manufacturer's Web site.

  Let us know if that helps.

  Concerning
  Anthony

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• When I open the Device Manager there is no ' sound, video...» "in the menu. What should I do for intal vista audio output device?

  My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?

  Stan

  Hello

  
  1. What is the brand and model of the computer?
  2 did you and changes before the show?
   
  Method 1:
   
  I suggest you open recognition of the device by using Device Manager.
  
  (a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
   
  (b) click on your computer as the location for the scan.
   
  (c) on the Action menu, click Scan for hardware changes.
   
  (d) to close the Device Manager window, and then restart the computer.

  Method 2:
  You can try to download and install the latest drivers for the sound from manufacturing sites and check.
  Check out the following link.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can see the following link.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  For reference:
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  Sound cards: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions
  It will be useful.

• My HP 6735 s webcam has disappeared from the Device Manager... has worked very well in the past... where is he now please?

  Webcam worked for months but is not, nor in the Device Manager. When using Skype it says buy a webcam!

  Hello

  I suggest you to follow the steps from the link provided below and check if it helps:

  HP Notebook PC - test Webcam Vista with QuickPlay
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00865850&lang=en&cc=UK&TaskID=125&ContentType=SupportFAQ&prodSeriesId=3687621&prodTypeId=321957

  Hope this helps,

• Latitude E5470 TPM has disappeared from the Device Manager

  At my employer, we had several problems with the TPM secure disappears from the Device Manager.

  This brings us to not be able to reactivate bit-locker.

  We would be the image the device with Windows 7 company.

  We had this happen with several machines who did and does not have dealt with windows updates.

  Same thing with Dell drivers and BIOS treated and untreated.

  I ran tool HWINFO and it lists the TPM with a memory address something like 0000FED4000 but I can't find that in the Device Manager or msinfo32.

  I have went to the BIOS and turn off the TPM and it turned on and activated it.

  I reloaded the BIOS firmware.

  If recreate us the image on laptops the TPM appears in the Manager of devices as planned so I don't think this as a problem with the motherboard.

  Curiously, although we had some motherboards replaced and the TPM is displayed.

  I feel that replacing the motherboard is the solution to this question we can restore the functionality with a new image or reload the operating system from scratch. But that does not satisfy the risk of the issue and already its appearance again.

  I searched for weeks a solution to this problem, but I came up short.

  I am sure that others have this problem.

  With all the processed drivers and windows updates treatment it does not solve the problem.

  Think you I'm missing?

  Thank you for taking the time to look into it.

  -Jason

  HERE IS THE SOLUTION

  Power off the laptop and remove the power adapters.

  Remove the back cover (screws do not come out entirely).

  Remove the SODIMM (s).

  Remove the battery (a screw, pull the tab to remove the connector of the card).

  Press and hold the power button for 20 seconds (drain the capacitors).

  Reinstall the SODIMM (s).

  Reconnect the battery and screw him.

  Attach the rear cover.

  Turn on the laptop, demarrer start in windows, open the Device Manager and check that the TPM is listed under security devices.

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.