The device monitor

Similar Questions

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)

• When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  This question should be addressed to the manufacturer of the device. From your previous posts, I guess you use GPIB or serial. If the unit has received the order, the manufacturer should be able to tell if no indicators on the device to update when the order is received. Based on my experience, however, the device indicators will most likely update on receipt of an order successfully.

• Cannot delete a non-existent monitor that displays the devices on: VGA

  Separated from this thread.

  I am facing the same problem please someone post a solution

  Hi Sairamkoti,

  Please answer a few questions to refine the question.

  1. What are the steps you tried to solve the problem?

  2. What is the brand and model of the computer?

  I suggest you to uninstall the device hidden by Device Manager to see if that makes a difference. You can track the message suggested by "vitoux K" in the provided thread.

  How can I remove a non-existent devices and printers monitor?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-remove-a-non-existent-monitor-from/75170b85-4107-4B25-9da8-8dc4d91d9634

  Hope this information helps. Response with status so that we can help you.

• Two monitors - I can't change "use this device as the primary monitor" because both are grayed.

  I just put my laptop (1) and (2) monitor to use together.  I like being a primary monitor (2) would monitor the "use this device as the primary monitor' however are grayed out.  I tried several things but cannot get to work.  Any suggestions? I am on Windows 7

  Hello, Olivia,.

  It depends on how you have the monitor Setup.

  You can get this option only when you select extend monitor instead of select two copies.

  If you want to set primary and secondary monitors, you must select the Extend monitors.

  For more information, see the article:

  Move windows between multiple monitors

  Setting up dual monitor: two screens are better than one

  Hope the helps of information.

• Resource monitor error "the device, mscank, reports"tv_ConfigMgrErr24"

  I get the error "the device, mscank, reports"tv_ConfigMgrErr24".» This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000. "This error is reported when the resource i run and performance monitor on my laptop. My config laptop is Sony Vaio win7 Home premium 64-bit. Kindly give me solution nd more of information for this problem. Full details of this error is:

  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, mscank, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000.
  Resolution:	1. check that the correct driver is installed.
  	2. try updating the drivers using Windows Update.
  	3. check with the manufacturer for an updated driver.
  	4. try to uninstall and reinstall the device using Device Manager.

  Hi riteshwalia,

  Mscank is a file system driver that may be associated with any device.

  Device Manager open to check what hardware device is not working properly on the computer, and then uninstall it.

  (a) open Device Manager by clicking the Start button.

  (b) click on Control Panel, click system and security, and then, under System, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) now check if any device has any yellow exclamation on it.

  Once you find any device with any brand, right click on the device and then click on the option to Uninstalland restart the computer and check if it works.

  If you can't find any device with all brands then check by activating hidden devices.

  (a) in Device Manager click on view and later click on Show hidden devices and check to see if you find any device with exclamation point and uninstall

  If the previous step fails, run Windows update to check and install the update from the recommended on the computer device driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If all steps above fail, then contact the manufacturer for updated driver for any device connected to the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Isolate the device safety work

  Be very careful about security, I would like to insulate my working iPhone device from the rest of the devices on my network (Mac, iPhones, iPads). I was looking for security questions, I realized that all my password on Safari (for example) have been recorded and readily available on this device. Therefore, could these passwords being downloaded by my company through MobileIron or any other device management application? They could get my login/password for apple through these programs while monitoring my phone? What are the restrictions for them to access and how to secure the rest of my machines and my Mac of this point of potential failure of security?

  Thanks for your advice/recommendations

  On the working device go settings > iCloud > Keycain > Toggle Off

  If you really want to separate your personal of your working device devices, you need to create an Apple ID for your device to work.

• Disappears from the main window of the activity monitor

  I'm under El Capitan 10.11.5, 15F34 build on an iMac (retina, 5K, 27 inch, mid-2015). If I open the activity monitor, I get the CPU usage, but the main window will briefly appear and disappear. If I minimize and restore, I also get it for a fraction of a second and then it seems to fall back on the dock. The history of CPU option (cmd 3) is grayed out, although I can get it as the icon in the dock.

  My question, then, is what caused this problem and how to restore to normal activity monitor?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• How to run the external monitor and Portege S100 together

  I am trying to add a second monitor to my S100. But I can't get the second monitor screen and laptop to work at the same time. (Display settings never 'sees' a single monitor.)

  Other forums on this site suggests that it is something to do with the factory presets. But I can't find out how to change these on my system. Any ideas? I am running Windows Vista Home Premium.

  Hello

  Usuallyy, you can switch between display devices using the function FN + F5 key.
  Have you tested this function?

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• Video chip does only not with the new monitor

  I have a HP pavilion p624of pc with original video express chip intel g45/g43. I buy a new widescreen Acer, S201HLbd I series have problems to display videos and video advertisements on my desk.

  Acer support said that the problem is with the drivers. I have check the HP website and don't see any update for drivers intel original; running the disk HP Manager, (3rd party provider, I guess), it tells me that my video drivers are outdated, and I need to get from the computer manufacturer. Where can I find an update of my current video drivers be able to watch videos on my desk. I connected the acer monitor to my laptop and it works fine. I started in safe mode and the video will work. It is not all the videos, but some that will be distorted, shine or have a black box in front of them. Need to find a new updated drivers, but where?

  Hello:

  Have you tried to change the screen resolution of different setttngs?  For example, if you went to a 4:3 to widescreen (16:9) display monitor you need to change the resolution to a wide screen resolution.

  Run the Intel driver update utility and it will scan your PC and give you downloads for all Intel devices that need updated drivers.

  http://www.Intel.com/p/en_US/support/detect?IID=dc_spotlight_dctop10

  Paul

• Under XP, had 2 monitors but now use only 1. The system always acts as the 2nd monitor is here. How to stop this?

  Programs/functions as the system to display on the far-away monitor, do not display on the existing monitor, it is impossible to do the functions. It's as if the system does not realize that the other monitor is not attached.

  in Device Manager you have tried to uninstall the

  removed the monitor?

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• How to reset the default monitor on Acer 2920, computer laptop think always connected to an external monitor

  Hello, I hope you can help me! I have a laptop Aspire 2920 with Windows Vista Home Edition O.S. It starts and works fine except that after I used it with an external monitor (a tv screen) on the possibility of using the external monitor, it only now starting to think that the monitor is the flat screen tv and doesn't recognize the normal screen of the laptop. The laptop screen is now "pixeled" and shows only like 2/3 of its total width. I checked in Control Panel and it has recorded as the 'normal' monitor flat screen, but I can't way a find to tell the computer that the monitor is the same as usual and not the flat screen tv. Thank you!!!

  Dear Lawrence,

  I ve solved the problem.

  Do you have your suggestion to reset and did not work, but keeping your idea, I hooked to an external monitor, mounted in Control Panel, remove the "non-existent" monitor in the device section.

  At this point, I had no image at all in the laptop and only the external monitor.

  Turn off the computer and then reset the power supply.

  Because the computer did not all other monitors, he then had to use the one by default with the default resolution, etc..

  Thanks, it was a great help!

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.