The device name is displayed not in the newspapers of the Administration

Similar Questions

• Listen to samples on [device name] option is not available

  Listen to samples on [device name] option is not available on the Folio overlays

  Yes, it's mac only.

  Neil

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• Name of the Contact to blackBerry Smartphones don't be displayed not only the locked phone

  When someone call me if BB 9700 phone is unlocked, phone number and contact name is displayed and I know who is calling.

  If the phone is locked, only the phone number is displayed. Hard to know who is calling.

  This problem appears after I upgraded to OS5 OS6.

  Could you help me?

  Thank you in advance.

  Concerning

  1. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no
  * If you don't see it here, your device operating system handles this differently. Look at the Options > Security > encryption.

  2. go to Options on your device > Security Options > encryption > include contacts the value 'No '.

• Label of the ASM to name of LUN mapping; Are not even necessary device names when you use ASMLib?

  = Environment details start =.

  OS: Oracle Linux 6.4

  Version Infra grid: 11.2.0.4

  Storage: EMC VMAX

  ASM Lib version:

  # rpm - qa | grep oracleasm

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  oracleasm version came not in rpm-qa output may be because it is part of the Oracle Linux kernel. But the 2 components above are not

  = Environment details end =.

  We have a 2 node RAC cluster.

  We wanted to add 2 LUNS to our data Diskgroup and asked team storage available to both nodes of the cluster.

  After that they provided, the Linux Admin scanned the LUN and powerpath device names were generated. The powerpath device names like SCSI logic unit number names are incremented sequentially. Because, two additional powerpath LUN used to Node1 to a local file system, the names of powerpath were incrementing differently in the two nodes.

  Thus, for the same LUNS emcpowerpath names differed in Node2. Linux Admin did not notice this difference. And he told us the names of newly added from Node1 LUNS powerpath that have been

  / dev/emcpowerv

  / dev/emcpowerw

  But in Node2, the same LUN were appointed

  / dev/emcpowert

  / dev/emcpoweru

  The DBA guess powerpath name these 2 LUNS will be same on Node2, label the discs to help

  oracleasm createdisk DATA17/dev/emcpowerv1

  oracleasm createdisk DATA18/dev/emcpowerw1

  After marking in node 1, the DBA ran scandisks in Node2. But while the oracleasm scandisks in Node2 is running, it does not seem to/dev/emcpowerv and/dev/emcpowerw in Node2. Instead, ASMLib is smart enough to read the LUN ID in Node1 and search devices powerpath with the same LUN ID and labels as Node1. What's it like in Node2, / dev/emcpowert is labeled DATA17 and/dev/emcpoweru is labeled DATA18 correctly, as shown below.

  Node1

  Node2

  LUN ID

  Label of the ASM

  / dev/emcpowerv

  / dev/emcpowert

  873F

  DATA17

  / dev/emcpowerw

  / dev/emcpoweru

  629:

  DATA18

  Confirmed using the oracleasm querydisk Pei/dev/emcpower < x > .

  During labelling using the oracleasm createdisk , since we use the LUN name I always thought that asmlib dealt only with the names of devices (Powerpath name in this case). I didn't know that ASMLib treats ID LUN. If ASMLIB faces in LUN ID internally, then you don't need to have the same name for a particular LUN for disks shared in different RAC nodes? Right?

  ASMLIB contains 3 packs. Oracleasmlib, which is distributed under a license of Oracle user space and is not part of the standard GPL software distribution. Oracleasm-support, which is in the standard repository and kernel driver of Oracleasm, which is included in the core Oracle UEK only or distributed by Red Hat to RHCK kernel. The subsequent RHCK driver requires a Red Hat subscription. You need all 3 installed packages.

  ASMLib doesn't care to the SCSI ID or device names. When you configure a device to ASMLIB, he writes a header special disk in the device, the command scandisk read and identify a device. ASMLIB devices are populated under the tree of device/dev/oracleasm and found by ASM using the default ORCL: device chain.

  Don't forget that ASMLIB does not work with multiple devices and if you use DB-Multipath or EMC Powerpath, you need to blacklist the physical devices so ASMLIB will use powerpath or multipath device instead. Otherwise there will be no failover devices like ASMLIB will simply use the first device found and ignore the other. Check the following:

  http://www.Oracle.com/technetwork/topics/Linux/multipath-097959.html

• Remove the multiple VirtualBench device name

  Hello. There is a problem need advice.

  The PC had been link with some Virtuabench, and it remember its device name even if it had not been connetced. This causes the tech lab get confused and often choose the wrong device. Somethimes the Virtualbench had already been hook upward with testing circult. This will result to return the Virtualbench to verify nom_peripherique is not possible.

  Is there a way to remove the unwanted peripheral VirtualBench in the list?

  Thanks and greetings

  ZachHindes wrote:

  If the device is no longer connected, you can remove it by calling the 'delete device' API (http://zone.ni.com/reference/en-XX/help/374540C-01/lciviref/remove_device/). It should be in the range of VirtualBench under "utilities".

  Ugh, I broke the link, and I can't fix it.  http://zone.NI.com/reference/en-XX/help/374540C-01/lciviref/remove_device/

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Try to pair with phone mob, arrive at the screen select device then cannot type in the device name.

  Phone is a Samsung SGH-A412.   PC using Vista.  I go to the Control Panel, Bluetooth, add wireless device, and then try to type the device name, but nothing happens. Tried to add a device, get a smaller screen with name & device Cat...  Same thing, nothing happens, tried after clicking the name & device Catagory also. Phone search but can't find PC.

  Hello

  Generally, you should not have to enter anything to find a Bluetooth device.

  Check out this link. http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device?SignedIn=1

  Follow these steps and come back with results.

  Hope that helps

• Using Vista Home Premium 64 x. In Windows Explorer how to group by name to display with the simple letters like A, B, C, D, etc. instead of A - H, P, Q - Z?

  Original title: group Windows Explorer by name

  Using Vista Home Premium 64 x.  In Windows Explorer how to group by name to display with the simple letters like A, B, C, D, etc. instead of A - H, P, Q - Z?  In XP, it could be sorted by simple letter, which makes it easier in a folder with many files.  Thanks in advance.

  Hi kmcmi,

   

  Welcome to Microsoft Answers Forums.

  Well this feature is not available in Windows Vista.

  It only works on Windows XP.

  I've added a useful link

  Behavior and change folder views

  http://windowshelp.Microsoft.com/Windows/en-us/help/3a3bfe59-5268-4FB3-81c5-7972c28939cd1033.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• E-mail address is associated with a name, but is not in the Windows Contacts

  How to remove an email address that appears with a Contact name, but is not in the Windows Contacts?

  How to remove an email address that appears with a Contact name, but is not in the Windows Contacts?

  It's called "AutoComplete".
  Windows Mail remembers the LAST 29 names that you used for emailing.
  Next time when you type, say, B in the column to, Windows Mail the research paper and displays a list of names began with the letter B. The list may include names not in your contact list, but you sent e-mail to the names.
  That must be the reason why you saw an address that was not in your contacts list. You have sent an email to this address.
  Remember, Windows Mail keeps only the last 29 names. So finally the 'undesirables' addresses will be gradually.

  If you want to delete ALL AutoComplete entries, here is a link to simple instruction:
  Note: scroll down to deleting all entries by semi-automatic email and follow the instructions there.
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html

  t-4-2

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196