The device or resource (web proxy) is not configured to accept connections on port "8080".

Similar Questions

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• device or resource (web proxy) is not configured to accept connections on port 8080

  Google chrome, IE, and firefox all say that they cannot connect to the proxy server. Now, I don't have a proxy server and never have. I tried to uncheck proxy server in Internet properties and I put it to automatically detect settings, but it still does not. I tried to change the settings in safe mode, I tried to go back to a restore point, I tried to turn off my firewall, antivirus, remove LogMeInHamachi, uninstall my antivirus, removing the K9 web protection and switching my DNS of OpenDNS. I also tested the same CAT6 cable I use for my office on my laptop and it worked fine, which means that it is a problem with my desktop computer and not the router or ISP. I haven't changed anything on my computer, or downloaded something again. I simply turn off April 13 around midnight and nothing worked from around 23:00 on 14, when I turned on it back again. I've tried everything I can find to try googling and have test things for hours. I'm about to burst a blood vessel. Help, please.

  Hello

  Please contact the Microsoft community.

  According to the understanding, the question that you are not able to connect to the internet on your computer, and also you have tried several troubleshooting steps that failed.

  I would like to ask some questions about your request:

  1. Did you change on your computer before the show?

  2. What antivirus do you use on your computer?

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. First of all, try to run the network troubleshooter to see if it can help diagnose and solve your problem:

  Open the utility of network troubleshooter by right-clicking the network icon in the notification area, and then click troubleshoot.

  If execution of the network troubleshooting utility does not solve the problem, then follow the steps described in Wired and wireless network connection problems in Windows. Please refer to the reference to Article below the issue of wired network connection and wireless in windows to run the network troubleshooter utility doesn't solve the problem, then follow the steps described in of connection problems in Windows wireless and wired network.

  Please follow a few troubleshooting steps below:

  Method 1: Run Microsoft Safety Scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the issue is not yet fix and then follow method 2.

  Method 2: Reset all the proxy settings.

  (1) open the command as administrator prompt, please include a link below for "how to Open Command Prompt".

  http://Windows.Microsoft.com/en-in/Windows/command-prompt-FAQ#1TC=Windows-7

  (2) type the below command and press ENTER.

  netsh winhttp reset proxy

  If the problem is still not resolved as of provide us the output of netsh winhttp reset proxy so that we can help you further.

  Hope this information is useful. If the problem persists, you can write back to us with the information in short so that we can help you further.

• The device or resource (PC name) is not configured to accept connections on port 'files and printers sharing (SMB).

  

  QUESTION:

  Hi all, I have a
  Windows 7 ultimate 32-bit and 64-bit of Windows 8 portable and I have been tirelessly
  fix this for days now. What I want is simple (I think) and
  It is to have access to all records of these two laptops on two computers so
  that sharing of files or folders would be easier.

  I get this diagnostic report after trying to access the network, records, that I tried
  access it from the same computer that is Windows 7. I do this first-hand
  because I believe that this is what causes the problem. Ironically, I can access
  files and folders on my 2nd laptop which is a Windows 8 64-bit via the network
  Since Windows 7 laptop.

  TS PERFORMED:

  --> AV/Firewall > OFF

  --> Active sharing options:

  sharing > WE

  network discovery > IT

  files and printers sharing > WE

  --> System File Checker executed successfully (at the start of Nsi did not work)

  --> Restart PC

  --> The command net start:

  NSI, Tdx and afd checked from the cmd

  --> Network and
  Sharing Center > change adapter settings > open the properties for the
  Installed the 'sharing files and printers for Microsoft networks ".

  Hope someone can
  Help. Thank you! :)

  Hi Mr. Bennet Martin! Thank you for your response to my query. Articles somehow helped, but just to let you know, when I go to 'Share with' option, for some reason any is that I've only got 'advanced sharing. Anyway I always tried to navigate and wander through the dialog box, and here are the steps I'd like to share:

  Local disk > share with > Advanced sharing > sharing tab > Advance sharing button > check the box "share this folder" > permissions * > click Add a button > click Advanced button > click on 'Search' > select NETWORK > CLICKED OK

  Once the NETWORK is added, I clicked on all the check boxes under permissions to "allow".

  

  He FINALLY solved the problem! I can access my own files on the same laptop when I go to 'Network' on the left side of the pane. Now the other laptop can also access all my files on the selected drive. Thank you for all your help Sir and I hope that this can also be useful to others! God bless you!

• Web proxy is not configured to accept connections on port 9100. How can I fix it?

  • Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Most likely it is the cause of the error. Do a Google for ' localhost:9100 / proxy.pac ' brings up a lot of links. You can try it yourself if you want to read through some of them. Some links show that it is a malware infection and a link shows that it has something to do with the Google Web Accelerator. So I'd start with in-depth malware and possibly post on one of the below related specialty forums, unless you know you have Google Web Accelerator (whatever it is).

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  When it failed, download Guided Help. Choose one of the specialty forums listed at the link above. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop.

• The device or resource (127.0.0.1) is not configured to accept connections on port "The World Wide Web (HTTP) service".

  Hello

  I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".
  Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Everyone,

  I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

  I did the following:

  1. I crossed the Config Wizard on domain Active Services and installed it.

  2 then I joined the field.  When I reboot the server, I get the following error:

  A. "your computer seems to be configured correctly, but the unit or".

  "resources (DNS server) is not responding.

  A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

  I can go to the tank and the PING of the IP address and everything is good.

  A2.  The I change the DNS to get the IP address automatically.  Then I can get to

  the fine of the internet, but I still get the same message about a problem with the

  DNS server.

  Can someone guide me please what the issue is here?  Thanks in advance.

  3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

  as part of the network.

  A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

  for the that set up simply, I can't find it, please help.

  Thanks in advance.

  Jerry

  Hi Jerry,

  I would like you to post your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope this helps.

• Your computer seems to be configured correctly, but the device or resource (DNS server) does not

  Yesterday afternoon after NO change in the system, I lost my Wired internet connection on my Dell XPS 630i running Win 7, but all the other wireless devices in the House are still able to connect to the internet.  I tried:

  * power cycle router, modem, etc.
  * reset the router (then reinstalled)
  * cables
  * checked NIC as much as I can because it is "integrated" and not his own card NIC I can reinstall (the light is on and says Windows adapter works)
  * all connection settings are set to automatic (without static IP)
  * I have also read through all the other posts with this same error message and tried everything listed there

  This morning, I tried to connect to a wireless using a Netgear adapter from another computer to work in the House.  NETGEAR said it is connected to the network, but I still have no Internet with the same error message as above.

  Help!

  If you did the Windows updates, then I should have mentioned that the KB2705219 update could be the cause and uninstall that solved the problem for some users.  To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

  But if you have McAfee then see this McAfee reviews.

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you should do the fix McAfee, if necessary.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Web proxy does not

  I recently have re installed Windows 7 and now cannot open all the web pages, but can successfully ping sites as well by the name and IP address. Diagnose connection problems the message returns ' your computer seems to be configured correctly, but the device or resource (web proxy) does not.

  Can someone please help?

  Hi BarryTL,

  Thanks for posting in the Microsoft community.

  I understand that you are unable to connect all web pages and you receive error Web Proxy not responding.

  Before you start the troubleshooting steps, I need the information required.

  1. you are on a domain network?

  2. what web browser do you use?

  3 did you changes to the computer?

  Method 1:

  If you use Internet explorer, I suggest you to see the links and check.

  What is a proxy server?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-proxy-server

  Change the proxy server settings in Internet Explorer

  http://Windows.Microsoft.com/en-us/Windows7/change-proxy-server-settings-in-Internet-Explorer

  See also:

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  See also:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• How can I configure Mozilla to accept connections on port "The World Wide Web (HTTP) service"?

  When you try to embed a video in PowerPoint 2013, the "Sorry we are having some problems of temporary service" message.

  In research on the problem to Microsoft. com, the following message is received: Mozilla is not configured to accept connections on port "The World Wide Web (HTTP) service."

  Hmm... PowerPoint must use Windows to connect to the internet and not Firefox.

  What method do you use?

  (1) insert > video > video online

  Apparently, there was an update this month that allows this, as described in this message of support (see the top of page answer right after the question): embedding video in powerpoint 2013 - Microsoft YouTube community online

  Here's how it should work after the update: Insert or link to a video on YouTube - PowerPoint

  (2) developer > control > Shockwave Flash Object

  As documented on other sites, such as: https://www2.palomar.edu/pages/atrc/2013/09/17/how-to-embed-youtube-video-in-powerpoint-2013/

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.