The difficulty to burn an Audio / or data disc using Windows Media Player on Windows Vista

Similar Questions

• Cannot burn Audio or data by using Windows Media Player CD

  Cannot burn Audio or data on Media Player get an ERROR!

  Very well, I was burning cd I burned a couple and a third, I put the disc in and it showed that it is in their. I did my burn list and clicked on start to burn. He acted as if she was going to burn. It is on the first track for a minute or two then came red of lil DEPISTENT what ERROR which track this continues through all the tracks. I've ruined several discs. I tried to reduce the speed of combustion and that did not help at all. I also have problems with getting the DVD to read. Read some DVD movies and some will not. I did Diagnostics on the burner itself and it keeps coming back that it works correctly and everything goes well with the material itself. Please someone help me.

  Hi Leynak,
   
  1. What is the exact error message you get?
  2. don't you make changes before the show?
  3. when exactly the burn process stops?
   
  If the song is playing, but the burn process continues to stop when inspecting the song, try turning off the upgrade of the volume:
  1. click on the arrow below the burn tab, and then click More Options.
  2. turn off the volume apply upgrade across tracks on the CD check box and then click OK.
  3. try burning the CD again.
   
  Visit this link for more information: burn a CD or DVD in
  Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player
  Also check if Windows burn engine burns the disc without any problems. Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• It is not possible to burn music on a blank disc to my Media Player library.

  Help, please. RIP ALL my CD s, to the computer as a backup incase I scratch or ruin CD and also for listening to music on my computer when he is away from camping etc.

  Now, I'm for some reason unable to burn my CD to a disc to use in my car, etc..  I use correct audio blank discs and burning will start but after a track, or so, all of a sudden he finalizes the disc and continues to burn!  I went well so maybe blank discs trying to get out.  Thanks for all the ideas here. I appreciate it.

  I use a computer toshiba laptop. Windows Vista business and keep my computer up-to-date.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I thank very you much for your response and links.  YES, I did as you suggested and it was a positive result. I am very happy.  THANKS again for your support and advice and I hope that you have a Christmas happy and safe and all "out there". 5 medal note permanently.

• Audio file keeps repeating using Winamp Media Player

  Don't sound

  As I've done millions of times before, and it froze on a moment of his, and he repeats to me, I played a song in Winamp.  As 1/20 of a second of the song, repeating endlessly.  I closed the program and the sound continues.

  Restart the PC should stop definitively the sound.

  You can also update your audio drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer of the sound card as well.

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I burn an ISO 9660 format disc in windows 7 >

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  ========================================
  The free ImgBurn is perhaps what you are looking for.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (works on XP, Vista, 7) (to download... left click on the green)
  spot with the white arrow: "Click here to download")
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  Also... See the following screenshot:

  Find the 9660 option
  http://i47.Tinypic.com/2qiradw.jpg

  ImgBurn - create the file image from files/folders
  http://grok.LSU.edu/article.aspx?articleid=15771

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• The option to burn a video to a disc is missing in Media Center

  WINDOWS MEDIA CENTER

  I can not burn a video to disc using windows media center because burn it to cd notification has disappeard, how do I get that option, because I found Windows media center so easy to use. Please advise thanks.

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Windows media player 11 for vista full dysfunction on cd burn?

  the Windows media player 11 for vista 64 holiday won't let me burn a blank cd media file at 192 kilobits per second (highest quality with songs less) it starts to burn and then cancels the entire drive and ruins it, now you mind, at the lowest kilobytes / option dry it will burn the cd with songs more but at the lowest quality which means that the disc is not very good in any case please help! Joe

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Impossible to move or burn photos to a CD - R using Windows Photo Gallery.

  or Windows Media or Windows. I use Windows Vista Home Basic, 32. Toshiba Satellite L305
  I can't get to step 2. The burn a disc dialog box never appears (step 3).

  The CD only formats.

  I can't drag and drop the disk. I've done this before and I still can burn music, so I know that's not the burner or the type/brand of CD itself.

  The following is in the Help menu.
  To burn pictures or videos to a disc

  1. Insert a writable CD or DVD CD writer or DVD in your computer.

  2. In the dialog box that appears, click on burn the files to a data disc.

  3. In engraving, a disc dialog box, type a name for this disc, and then click Next.

     It can take several minutes for the drive to be formatted in the active file system format by default. When formatting is complete, an empty disc folder opens.

  Use your IMAGES instead of the Gallery folder.
  You should see the button BURN up.

  t-4-2

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I am currently using Windows Vista. I face a problem that I can't remove all the files in the form of MPEG-4. Error with code 0x800704C8.

  I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.

  original title: Code 0x800704C8...

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you follow the link and check.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Step 2;

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

  I use Windows Vista Home Premium 32 - bit SP2.

  Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

  I just installed hotfix for Windows (KB947821).

  It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

  Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

  Help?

  Hi Jeffrey,.

  It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

• can I burn a dvd 2.3:1 using windows dvd create? __

  can I burn a dvd 2.3:1 using windows dvd create?

  I don't see how to make 16:9 and 4:3. If I had a divx file that was 2.3:1 How could I burn and keep proportions?

  Hi snmkelley,

  Windows DVD maker cannot accommodate proportions 16.9 and 4.3.

  For more information please visit the link below.

  http://blogs.msdn.com/deanro/archive/2006/11/14/Windows-DVD-Maker-and-aspect-ratios.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner