The display of a Date with only the day and month in the DateField?

Similar Questions

• How to remove the period/point of the day and month in the menu bar

  Since the upgrade to Sierra I noticed that the day and month in the menu bar have now periods (diaphragm openings) after them, for example 'Sun' instead of 'Sun '. It is not possible to change this by using the language and region settings. I find them boring. Is there any other way (for example by using Terminal Server) to get rid of them?

  This is the default value for the Australia, for example. What region is selected in system preferences?

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Stuck on the second parameter to display on a laptop with only 1 screen

  My son clicked on 2nd screen only on his laptop and the screen became black we can't he come back to normal.  The screen remains black even after stop and turn it back on.  Is there a control function that I can use to go back to the 1st screen?

  OK, I fixed it.  I had to get another monitor out of my old desktop computer and plug it into the laptop.  Then I could see on the screen, we pressed cont + alt + F4, a screen side popped up which had the possibility to the pc screen, the second screen and 2 other screen options.  I just clicked on the pc screen and everything went back to normal.  I don't know how I would have fixed with on the second monitor well.

• We have installed lightroom CC 2015 and imported some photos when we change to develop we get the image displayed as a heatmap with only red/green/blue points/lines. All filters are disabled...

  

  Hello roberto,

  Please follow the steps below.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  
  

  Let us know if that helps.

  Kind regards

  ~ Mohit

• With only no load and no response from the key enter

  My phone does not have a charge.  Loss of power even when not in service.  Also the button to change the screens is not as responsive or doesn't work at all.

  Take a look at this for a few troubleshooting suggestions.

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  This can give a try to the question of the responsiveness of the button. I know you need the button to do it, but give it a try.

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  If the device still won't hold a charge, you should make an appointment at the Apple Store and ask them to evaluate the device for you.

• How to get the days and months when two dates are given

  Hi all
  
  I have a requirement where I need to return the number of months and days between two given dates.
  I have no need to take account of the year as the difference in dates is always less than a year
  
  I have 28 June 2012 and January 31, 2013, as dates.
  
  I'm working on 10g
  
  When I select the double months_between(:a,:b) and provide the dates he gives me 7.09677
  I want to give only 7 months and 9 days, or what ever the exact days are.
  
  Your contributions are appreciated

  Try this:

  WITH t AS
  (SELECT TO_DATE('28-JUN-2012', 'DD-MON-YYYY') date1, TO_DATE('31-JAN-2013', 'DD-MON-YYYY') date2 FROM dual)
  SELECT TRUNC(MONTHS_BETWEEN(date2, date1)) months,
         date2 - ADD_MONTHS(date1, TRUNC(MONTHS_BETWEEN(date2, date1))) days
  FROM   t
  

• Disable the days and months to Date Pciker

  APEX 4.0
  30%
  
  Hello, I have a question. How to disable the months and days in the datePicker to apex? I want the year only because Im creating a school year. So, I want only one year in the date picker. How do I do that? Thank you

  You can create a dynamic LOV for use in a select list that generates values in a number of ways, depending on the requirements.

  For example, a way to get a projection of the next decade of this year with the help of a sequence of integer generator:

  select
            y l, y v
  from
            (select
                      extract(year from sysdate) + rownum - 1 y
            from
                      dual connect by rownum <= 10)
  order by
            v
  
  L                      V
  ---------------------- ----------------------
  2010                   2010
  2011                   2011
  2012                   2012
  2013                   2013
  2014                   2014
  2015                   2015
  2016                   2016
  2017                   2017
  2018                   2018
  2019                   2019                   
  

  Or another, to get a this year ± 5 years interval using the model clause:

  select
            y l, y v
  from
            (select
                      y
            from
                      dual
            model
                      return updated rows
                      dimension by (
                        0 n)
                      measures (
                        extract(year from sysdate) - 5 y)
                      rules
                        iterate (10) (
                          y[iteration_number] = y[0] + iteration_number))
  order by
            v
  
  L                      V
  ---------------------- ----------------------
  2006                   2006
  2007                   2007
  2008                   2008
  2009                   2009
  2010                   2010
  2011                   2011
  2012                   2012
  2013                   2013
  2014                   2014
  2015                   2015
  

  You might generate complex results using the clause type games. A pipeline function would be another option.

  Generate values from scratch as this is useful if your system does not have existing tables of reference/dimension of the described type of Jeff.

• can I restart my mac - pro to start from the beginning I / ve he had only 2 days and I think that I / ve screwed it up

  can I restart my mac pro from the beginning.i/ve really messed it .i/ve only had 2 days.thanks

  A new Mac comes with 90 days of free technical support, AppleCare.

  Please call AppleCare.

  AppleCare: 1-800-275-2273

• Find invalid date and month not corresponding with the calendar

  Helllo,
  
  I want to find the line to invalid date, which do not correspond with day and month.
  
  Also, the program should capture the data if the year < 1900
  
  Thanks in advance
  
  
  
  with xx as
  (select 101 as the ID, May 24, 1899 ' than double create_date)
  Union of all the
  Select 101, 32/03/2012 "of the double
  Union of all the
  Select 102 30/02/2012 "of the double
  Union of all the
  Select 101, 29/02/2013 "of the double
  Union of all the
  Select 102, February 28, 2013 "of the double
  Union of all the
  Select 102, 24 January 2012 ' double
  Union of all the
  Select 101, ' - 11/22 / 2012 "of the double
  Union of all the
  Select 102, ' 05/42/2012 "of the double
  Union of all the
  Select 101, ' 01/72/2012 "of the double
  )
  
  Select * from xx
  

• manipulating data with several readings

  Hi again,

  So I can read the tensions out of the terminals of NI USB-6009. Now was that reading analog1 and B be analog2 reading. I want to calculate something like 2 * A - B. I can't understand how to do this.

  I can read the values together and watch them on the same chart, but I can't deal with them. I enclose the file in which I read the values, put them through the filters and then display. But 'data' is only one variable, although there are two readings in it. I do not know how to separate one from the other.

  Thanks for the help.

  cartonn30gel,

  Playback DAQmx returns an array of waveforms, each element of the array represents a data channel.

  To split the individual channels out there, use primitive Table of indexes in the table Palette:

  

  You can then use regular numeric operations on the waveform, or if all you care is the actual reading, you can get the table of voltages measured waveform using the primitive to get elements of waveform in the waveform Palette.

  

  Thicker wires in LabVIEW represent arrays that contain several similar items.  The waveform data type is a convenient way to manage measurement data because it combines information in time (t0 and dt) with the data table measured (Y).

  I hope this helps.

  Simon

• How to display a positive value with a thinner sign

  I want to display a positive value with a thinner sign and a negative value with a less fine sign. How can I do? Is there any character in the custom format for this? I don't want to convert number to text and use the case statement because I need to two decimal and thousands separator.

  OK, try this...

  You will need to do a "UNION ALL" of three queries, one for positive values, one for the values zero and one for negative values.

  In the query "negative", follow these steps:

  (1) add a filter on the measure of value 'less than 0.
  (This will ensure that all values are negative).

  (2) in the tab Format data, select "Custom" and type #, # 0.00 -
  (This will add the end negative sign.)

  (3) in the tab change the formula, add the function absolute value ABS (able to insert here)
  (This will get rid of the default signing negative.)

  For the query "positive values", change the above as follows:

  (1) change the filter to "0".
  (2) in the format of data, change the custom format #, # 0.00 +.
  Step 3 is unnecessary since all values are positive.

  For the query "values null ', just add a filter 'equal to zero.'

• Several files of data with autoextend ON &amp; OFF

  Hello
  
  Is there any negative impact, and if I add a new data file to the storage space with auto-prolonger ON, while the old data file for the same storage space is OFF.
  
  Here is my scenario:
  I have 3 groups of disks in my ASM (DATA1, DATA2, and DATA3) instance.
  
  Now, all my tablespace's datafiles of Data1 with auto - THEY extend. (It was a mitake creating tablespace). To distribute the disk space, I intend to add a new data files of DATA 2 & 3 for half of the storage space.
  And for these storage spaces, I'll turn off the auto-prolonger for old data files and marketing the autoextend for new data files.
  
  The idea is, Oracle will begin to load the data for the new ASM disk groups in the future and I'll get the appropriate disk space distribution. Is there a problem with this approach? (In particular, when one of my datafile autoextend is DISABLED and other is lit).
  
  Your advice is appreciated!
  
  Kind regards

  In fact, it is a valid strategy to ensure that some datafile (s) in some single user grow while others stay the same size.

  Correctly, several data files must have been created earlier so that data would have been divided on all files. However, you can always add new data with AUTOEXTEND ON files and set the old files of data AUTOEXTEND off at any time (and switch ON and OFF as needed if you need to dynamically manage the use of the space of the file system, when you move data to new file systems files).

  Is there a negative impact

  N °

  Hemant K Collette

• Satellite C850 - Office has only users guide and trash

  Hello.

  Problems with my Satellite C850 - 02D00m. broken the screen and using an external monitor. Now a few minutes after the robbery he on it blocks the normal desktop with only a guide and an icon that recycle bin shows. Before crashing, I tried to do a restore system without success and of course cannot locate the recovery discs I did when it was new.

  Despite trying I can't open the guide of the user using mouse pad or keys.

  Any ideas? Please, I beg you!

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  You will find instructions on the repair and recovery of Windows 8.

  Try running HDD recovery image installation and portable test with the factory settings.
  Please post comments.

• My user folder displays the data of 30 GB. Actual data are only 2 GB. I want to wipe my drive C of hidden data. How can I get the details of 30 GB of data shown in the properties of the folder

  My user folder displays the data of 30 GB. Actual data are only 2 GB. I want to wipe my drive C of hidden data. How can I get the details of 30 GB of data shown in the properties of the folder.

  Hello

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.