The display shows "Input not supported".

I went to the account on my computer and everything on the screen was really big. So I went to change the resolution and clicked OK. Then the screen went black and it says "input not supported" and nothing happened so I turned off the computer and turned it back and then he always says "input not supported". Now, I am on safe mode, and it works fine. I do not know how to solve this problem and would appreciate help!
Thank you
Tara

You changed the resolution to a setting that your monitor is unable to cope with. You should first try a loading in the "last known good configuration" and if it does not, then you should do a safe mode system restore back before you changed the resolution settings. MCDST
A founding member MCITP - technician Support Enterprise-
MCTS - Configuration Vista - Charter Member
MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
MCITP - Consumer Support Technician
MCTS - Windows Server 2008, Active Directory Configuration

Tags: Windows

Similar Questions

  • What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

    I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    -------------------------------------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    -------------------------------------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    -------------------------------------------------------------------------------------------------------------------------------------

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to change the resolution of the screen when the "input not supported" message after reboot

    I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
    the problem is,
    the "input not supported" message when I reboot the PC and does not allow me to do anything.
    He presents himself before the logon prompt.
    I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
    He returns to the State ("input not supported" and no prompt connection) after I restart the PC

    Mark,
    Thank you for your help,
    I tried in vain,
    I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

    Kind regards

    Claudio.

  • "Input not supported".

    Hi all...

    I received recently a 19 "LCD Acer monitor #AL - 1916W, as a gift to replace the burned out monitor that came with my HP Pavilion. I had no problem with this monitor for about a month before this weekend. After you start the computer, the screen went black and shows a floating dialog, that said: 'input not supported '. I was forced to go in safe mode and reset the resolution to VÅGÅ to return to Windows. After reducing the 'display property settings' resolution to 1600 X 900 setting, this seemed to solve the problem a bit. However, Acer documentation indicates that the optimal resolution for this monitor is 1440 X 900, the dose of slider does not offer this resolution and resolution of 1600 X 900, I use now shows vertical-intermittent-aging in the structure of the police throughout the system. If I drop to the next setting, which is weaker, then 1600 X 900 I get stretched more grizzled graphics with fonts. If I go on it, I get a black screen. In my opinion, the resolution, I am forced to use now, it's that an incorrect ratio for this monitor because in addition to the question of the police of the Office is a bit pinched vertically looking.

    I wonder what caused this change in the first place.  I delete some temporary files using "CCcleaner" but nothing in the registry.

    Can someone tell me how I can get 1440 X 900 resolution?  An input or advice would be greatly appreciated.

    Operating system:

    HP Pavilion a1012n

    Windows XP, home addition version 2002

    Service Pack 3.

    Processor: Pentium 4 at 3.06 GHZ with 200 GB of RAM.

    Thank you for taking the time to read this long explanation...

    RayT

    The solution is to add a video card.  The bad news is that your PC does PCI - e or AGP. A PCI video card is all that you will be able to upgrade to. Here a link to a very large selection. Don't expect dazzling performance of a gaming PC. It's not going to happen

    Your card mother ASUS LRTP - LA has integrated with up to 64 MB allocated video. Is not enough memory and you can't possibly increase shared much memory either.

    Here is a link to the page of product support for your PC.

  • "Input not supported supported." error when you try to play game PC

    Original title : Program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

    I'm playing a PC game, but it comes up with this message saying "Input not supported." How to solve this problem?

    Hello

    1. what operating system is installed on the computer?

    2. the problem persists with all the games?

    Update the display drivers and check if the problem persists.

    Updated a hardware driver that is not working properly

    Update a hardware driver that is not working properly (Windows Vista)

    How to manage devices in Windows XP

    Hope this information helps.

  • 'Input not supported' with Acer AL2216W monitor

    I use Windows Vista Home Premium with Service Pack 2 in a system with an Intel D946GZIS motherboard and an ACER AL2216W LCD display panel. This system has worked well for over a year, but recently in a battle of two months with a problem of code 10, the screen would occasionally drain and display "Input not supported" in a small floating window. As a first step, start with F8 would allow the system to boot in a 640 x 480 window which would quickly find its native resolution of 1680 x 1050. But now it starts directly from the screen to 640 x 480 to the State banned in normal mode, make possible adjustments to display.

    I can still use this display Mode without failure, but find that Safe Mode display adjustments do not affect the display in normal mode. In addition, a panel of HDTV used as a monitor instead of the Acer works wonderfully in normal mode in 1920 x 1080, but display settings to a lower resolution made with it do not persist when Acer Board is restored. Finally, my system is no longer recognizes the Acer AL2216W, but use a "default monitor.instead." And I can not install the Acer in the Mode panel without failure!

    You can try to uninstall your display driver in Device Manager, then reboot. Check if the monitor is listed under Device Manager. Your monitor should be below or try to reinstall the driver using the procedure on the link in my first answer.

    You can then go to the support site for your computer manufacturer and download the latest display driver specific to your operating system. Look for instructions on how to uninstall previous drivers and install the latest driver.

  • IT KEEPS SAYING ON MY SCREEN MAIN INPUT NOT SUPPORT HOW CAN I GO DOWN THAT

    INPUT NOT SUPPORTED IS FLOATING AROUND ON THE MAIN SCREEN WHY AND HOW I GET THIS OFF

    This means that what he says, the video input in your monitor settings do not match those that it can display.  You need to start your computer in Mode safe mode to reset the display settings (resolution, color, rate refresh, etc.) to those that your monitor supports.  Otherwise it may be that your computer has failed.  Try to borrow another monitor from a friend and connect your monitor on a computer friend and which should help limit.

    "CARRIEGRUBE" wrote in the new message: * e-mail address is removed from the privacy... *

    INPUT NOT SUPPORTED IS FLOATING AROUND ON THE MAIN SCREEN WHY AND HOW I GET THIS OFF

  • X223W - VGA does not? (input not supported)

    Or maybe that I don't do something good?  I'm just trying to plug my 360 via VGA.  I have my PC connected via DVI.  When the two are connected, I use the OSD to access the plug insertion icon.  I have 3 options here.  Analog, digital and DDC/CI.  Digital is highlighted that I assume average DVI is connected.  If I turn it on to analog the screen goes black and says "input not supported".  If I unplug my DVI cable and then just plug the VGA cable I always get "input not supported".

    Any help would be appreciated it drives me crazy.

    For reference, I used this same 360 and VGA cable on another monitor and it works fine.

    It seems that sent by the 360 resolution or refresh rate is not supported by the monitor.

    See this table of hours of support for this model:

  • Blocks - Spooler subsystem or the display driver did not work properly

    I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

    Hello

    1 when was the last time, he did not work properly?

    2. the accident happens at random or when executing a particular task?

    3 did you a recent software or changes to the material on the computer?

    Method 1:

    I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Check if the problem persists, if she does not follow the steps in method 2:

    Method 2:

    This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

    I also suggest you to follow the steps mentioned in the link and check.

    Do not operate the automated FIXIT. Follow the manual steps and check.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

    http://support.Microsoft.com/kb/810894/en-us

    (Also applies to Windows Vista)

    Method 3:

    You can also update the display drivers on the manufacturer's Web site or use the link below.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    See also:

    Pick up the pieces after a computer crash

    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Hope this helps and keep us informed if you need help.

  • Bit Trip Beat game error: input not supported

    Original title: input not supported

    What came was a floating message saying "input not supported", then so about 2 hours ago I double clicked on the game "Bit Trip Beat." so I thought well ill just alt tab and change the resolution and others, but I could not alt tab... I could hear my msn flashes... I could hear trip beat bit sounds in the game, everything except the screen worked...

    so I restarted my comp in safe mode with network connections so I could google a few answers but nothing helped me to this day...
    things I've tried are, restart in safe mode, and then change the resolution to something, I know that it can handle (did not work)... by clicking on "last known good configuration" (did not work)... ive tried rebooting with command prompt and typing a few commands that I found from google that is supposed to restore the resolution that doesn't work anymore , I also chose another option in windows boot manager "enable video low resolution (640 x 480), which also did not work."
    Ive kept googling and nothing seems to work, I'm running a windows OS vista and I'm not sure of my monitor acer... model someone at - he a clue whats up?
    What, in my view, that has happened, is that the game Bit Trip Beat made the default resolution of my something computers it can not handle... that is what happened?... because when I started, I had to force shutdown my computer and restart from there. any help would be appreciated

    Hello

     
    I suggest you to try Method 2 from the previous post and adjust graphics hardware acceleration. If it does not resolve the problem, then try to uninstall the graphics drivers and reinstall it.
    Let us know if it helps.
  • Desktop stuck on "input not supported".

    While trying to set the resolution, I apparently took a level that does not like Windows xp.  My monitor now has a box that says "input not supported" floating around on it, and little matter what I try (esc, Ctrl-alt-delete, restart) I can not access my computer at all.  Help, please!

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • The specified protocol is not supported by your handheld. Please try another URL in tour 9630

    Hello

    In my application, I have an option to save the url of any web site called yahoo, google etc. In all mobile phones except Tour (9630) it works.

    In the device of tower when I click on the link to my app, an alert is showing as "the specified protocol is not supported by your handheld. Please try a different URL.

    In the direct browser I can browse any site. In other mobile like curve, "BOLD" etc... work well... In this round of my request, he won't have to one of the sites.  Please someone help me solve this problem

    Thanks in advance

    Joe

    Hi all

    I got the answer to this question. The 9630 tour will not take the string that is added to the web url.

    We must give the complete url string.

  • U2412M - the current schedule is not supported

    I have a new U2412M monitor that is attached to an HP Desktop running Windows 8.1. I use a (computer) display (monitor) DVI cable port. The monitor works fine except for an annoying message:
    "The current schedule is not supported...". "Please change your date of entry in 1920 x 1200 @60 hz.

    However, synchronization is set to 60 Hz, and the resolution is 1920 x 1200. I have the latest drivers. It is forbidden to use a Dell monitor on an HP desktop computer?

    Thanks for any help.

    alessiog,

    It is forbidden to use a Dell monitor on an HP desktop computer?
    * No.

    We believe that the issue could be the DP to DVI converter cable.

    HP computer graphics card has a DVI port? If so, test computer DVI to DVI monitor by using the printer Dell supplied cable DVI.

    You might also try DP DP to listen to computer, but you will need to buy the cable of DP to DP.

  • Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

    Hello

    Need help desperate please

    Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

    Hi TomasB,

    Please reset the file browser & Internet hosts.

    Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help

    • Close all windows of Internet Explorer that are currently open.
    • Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
    • Press or click the Tools button and then tap or click on Internet options.
    • Press or click on the Advanced tab, and then tap or click Reset.
    • In the reset Internet Explorer settings dialog, tap or click Reset.
    • When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.

    Reset the hosts file

    Reference: https://support.microsoft.com/en-us/kb/972034

    Mac: How do I edit the file Hosts on Mac OS X - TekRevue

    Reference: Solutions to connection errors, activation and connection with Creative Suite and creative Cloud applications.

    Let us know if it helps.

    Kind regards

    ~ Mohit

  • I just bought an iPhone 4 and it's not let me download from the App Store because it says I need iOS 8 but the iPhone 4 does not support 8, how do I get apps?

    I just bought an iPhone 4 and now I can't download apps from the App Store because it says I need iOS 8 but the iPhone 4 supports ios 8, how can I download apps?

    Return the iPhone 4 and buy an iPhone more later from model.

    The iPhone 4 does not support any version of iOS iOS 7.1.2 above.

Maybe you are looking for