The DNS server after windows update error

I installed Windows on my Mac.  It was working fine and then windows did an update and I started getting the server DNS error and could not connect to the Internet.  I restored the computer to an earlier time but then windows made an another automatic update and now I get the error of DNS server again.  I know that I can restore again, but it will last only until the next update.  What can I do?

Hello

You did changes to the computer before the show?

I suggest you try the steps from the following link:

Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

See also:

Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

Tags: Windows

Similar Questions

  • 2012 Server R2 Windows Update error 8024402F Essentials

    Hi all

    I have a newly installed Win 2 k 12 R2 Essentials server. Windows updates worked for the first time in court (first update etc.) but now when I go to check the updates manually, I get error 8024402F. I tried ALL the troubleshooting on various Internet sites without success. This includes CISD, sfc.exe, disabling firewall/scannow, etc..

    I am at my wits end now with what I can't work out where it is a failure. To confirm, there is no firewall or proxy between this server and the internet.

    Your advice and your support would be much appreciated!

    Thank you
    Jason

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Satellite L500 - system hung on the splash screen after Windows update

    Hello

    I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

    Thank you
    Denise

    Hello

    > hung on the blue startup screen after it has restarted after a windows update
    This means that you get a blue screen after Windows update and more, you can start Windows t?

    You can start Windows in safe mode?

  • Computer opens with my name on the Welcome screen after Windows Update.

    Original title: opening session/Welcome screen problem

    My problem started when an automatic update installed Windows Indexing and also, somehow, caused my computer to open with the Welcome screen with my name on it instead of just starting on the desk as he always did before this update. I wanted to or if necessary so I looked for a way to disable indexing. A web page was told to delete all except Richard (my name) account and the guest account. There was an account for Net framework so I removed it. Since then my computer wants to log on just "administrator." To change this, I was told to go to user accounts and change the way in which Windows connects. I did and now Windows gives me an error message when trying to login "administrator." I click the OK button on the error message and then it gives me the choice to open a session like me or comments. I chose me and then it connects. I want just XP to go directly to me.

    I'm sorry if my question above seems confused. It's because I'm confused about this. I hope it's clear enough for someone to help him. I tried the Help Desk, but they charge I have no money. I felt that they should help because this problem was caused by intrusive and unnecessary changes to my use normal XP that Microsoft made without asking me to do or not.
    TIA,
    KK

    Thank you.  I had to do things a little differently that you suggested, but it helped. I had to check the checkbox that users must enter a user name and password so I could choose my name and then after doing that I have disabled, users must enter a user name and password and click on OK. I left the White Hen of password window comes and then rebooted and it worked.

  • Failed to open the Works document after Windows Update

    Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

    no change...

    Hi SILLIVEN,.

    1. what exactly happens when you open the works document?
    2. do you get an error message?

    Try these steps and check the result.
    Step 1: Update remove recently installed
    a. see remove an update
    b. Once you have removed the update, restart the computer.
    c. open work document and check if the problem persists.

    Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. install the updates. See the updates Windows Installer
    d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
    e. check if the problem persists.

    For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to connect to the wireless network after Windows update

    Original title: after receiving an update from Microsoft last week, my wireless is not working. He died immediately after the update. Why?

    My wireless does not recognize any of the wireless networks that are in my area. The driver manager indicates that the wireless driver works correctly. The wizard does not work and the Center wireless says that it cannot solve the problem.

    Hi JeffreySessions,

    ·         Do you have update installed?

    Follow these methods.

    Method 1: Follow the steps in the article.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 2:  Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After the boot minimum troubleshooting step, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Update the latest drivers for the network card.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 4: Follow the steps in the article.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • Stuck on the profile screen after Windows update

    After that a windows update last night, my computer is stuck on the profile screen and I can not connect.  By clicking on the icons for different accounts does not bring to the top of the login screen where I can enter a password. The screen just flashes and the wheel spins for a while and then comes back to the profile screen. I tried to boot into the different security modes but same thing happens and I can not connect. I also tried to fix the computer and restart at the last known good configuration under boot options with the same results. Short to reset the default settings that will erase all my data, (which may or may not work) is there another fix?  It seems that windows is starting up, but just the login screen appear so I can enter my password.  I have windows 7 Home premium version.

    Hello

    Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

    If the Panel username and password is not displayed during logon and the problem persists even in safe mode, then the question could be if there is a corrupted file system or some third party conflicts.

    I suggest that you want to run auto repair with installation media and see if it helps you repair system files. For the execution of the task, I suggest you to try the steps below and see if it helps.

    Method 1

    When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

    Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    If you are using Windows 7 and you have the product key and then the link provided below might help you to download and create installation media if you do not.

    Download Windows 7 Disk Images (ISO files)

    Method 2

    If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

    1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
    2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
    3. Click repair your computer.
    4. Click the operating system you want to repair, and then click Next.
    5. In the System Recovery Options dialog box, click command prompt.
    6. Type Bootrec.exe, and then press ENTER.

    See the following link for more information:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    http://support.Microsoft.com/kb/927392

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • The color faded after Windows update

    Hello


    I had a quick search but am finding the interface of the somewhat difficult forum looking for, sorry in advanced if it is a double upward.

    Recently, I noticed that images open in both photoshop and lightroom are washed-out (blue tint, as if you have the color space is set wrong).  However when I open the image in the image windows photo viewer looked perfect.

    All images are set to sRGB in all respects.  When I open the images in photoshop from another machine, they are also very good, and I compared the config including color spaces of the two machines of... no difference at all...  It's just that a pc that has the problem, and on this pc, the problem only occurs in photoshop and lightroom - unfortunately the PC in question is my pc edition.

    This problem has been completely resolved to roll back the update of birthday windows 10 - no other changes at all, I have believed it if I hadn't seen with my own eyes.  So I'm going well so far, but this is obviously not ideal.

    Does anyone else have this problem?  And if so, were you able to fix it without uninstalling the update of windows 10 birthday?

    In case it is relevant, here are the specs:

    i5 - 6600 k using onchip graphics

    32 GB of Ram

    SSD Intel 525 (OS)

    SSD Intel 730 (installation of adobe)

    SanDisk ultra ssd (work space, where images are edited)

    Dell UP2716D, calibrated with the dell software and equipment, associated with the set of good color profile.

    But what I don't understand is how the images can look good on the same screen using windows photo viewer, but look rubbish in lightroom and photoshop?

    Lightroom and Photoshop are insured, which means that they use color profiles embedded in images and the color profile associated with a calibrated screen to faithfully show accurate colors. So if the display color profile has been removed or altered, they won't be able to display correct colors.  The Windows Photo app, on the other hand, is not color managed, so it doesn't matter what color profile is associated with the screen, since it won't use it.

  • Get the message: it is not possible to load the user profile after Windows updates

    Original title: Windows won't let me sign after updates

    Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

    Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

    Hi romanista,.

    You can read the following article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • black screen appears instead of the splash screen after Windows updates

    Hi windows8 has installed and configured the updates. Can connect but the screen goes black instead of the page of the windows application. tried to turn on and turn off the computer, but still happening

    Hello Diane,.

    Thanks for the reply.

    Have you tried to scan Microsoft security running?

    I suggest to do a System Restore and check if it helps. Please follow these steps:

    a. press the keys "Ctrl + Alt + Delete" together, and then click Task Manager.
    b. in the Task Manager, click on "File" and click "new task".
    c. type rstrui.exe in the box, and then click on ok.
    d. click on 'Next' and follow the on-screen instructions.

    Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    I hope it helps.

    Thank you

  • Adobe Acrobat does not see the PC even after Windows Update 10?

    I started with Adobe Acrobat 8 Standard on my older XP machine, then to Windows 8 (8.1) on a new machine, (Adobe has helped me then) now update Windows 10 they gave me 5 days to 'pay' as they don't recognize me.  Can someone guide me in the right direction?

    Hey,.

    Acrobat 8 is not compatible with MS Windows 10, only 11 Acrobat and Acrobat DC has been tested successfully on MS Windows 10.

    Please try the last Adobe Acrobat Pro DC free trial download Adobe Acrobat | Acrobat Pro DC.

    Kind regards

    Nicos

  • ENVY 100 D400: Unable to save the files scanned after Windows update 10.

    After scanning the computer, I click on save button with one of two results. Sometimes nothing at all happens. Other times, the computer stops responding.

    @Roy16

    Probably, you need to delete the current program printer and install a new copy of the software full functionality.

    HP ENVY 100 e - All - in - One Printer - D410a

    Full software features:

    File name: LSD410_1315 - 1.exe

  • Vista Start Menu is blank on the left side after Windows updates

    Original title: Vista Start Menu

    Hi, this is my first post, so I hope someone can help.

    I recently did a load of hole of updates on my pc of the friends, running Vista Home ultimate.

    Since I did, when I click on the start menu, the left side is empty and it wasn't like this before.

    Does anyone have ideas, what may be the problem?

    I would propose a system restore or a malware scan.

  • Windows update error 80073712 when I install the update of security KB2585542

    Update faile several times to update security update for Windows Vistan KB2585542 error found: Code 80073712

    Published 10/01/2010

    Thank you

    Hello


    You can see the following link.
    Windows Update error 80073712
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712
    It will be useful.
  • Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P)

    I have about 2 GB of updates of windows that will not download. If I choose 1 or all updates, the status bar just stay at 0% downloaded. I used the wizard of Windows Update diagnostic thing and the results were:

    Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P) - not fixed

    Registration for the service is missing or corrupt - fixed

    Recent updates installation problems - fixed

    Recent updates installation problems - fixed

    Recent updates installation problems - fixed

    After restarting windows updates always do not download.

    I'm running Windows 7 64 service pack 1.

    concerning

    Hi Nico,

    Thank you for viewing in Microsoft Community, we appreciate your interest for Windows 10.

    As you can not upgrade to Windows 10 through the update, this issue could if explained by antivirus or corrupted software update Windows components.

    I suggest that you follow the troubleshooting steps that are being provided by Andre Da Costa in the link below and check out them.

    Reference: How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10

    Section: 0 x 80070057

    It will be useful. Reply to the post with a State updated with this issue, we will be happy to help you further.

Maybe you are looking for