The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

Similar Questions

• "The files are on a volume that does not support Trash. You want to permanently delete the item? »

  All of a sudden I started getting error "files are on a volume that does not support Trash. You want to permanently delete the item?

  iMAC OSX 10.9.4.

  LR 5.6.

  Camara 8.6 gross

  Any idea?

  Please help me...

  Thanks in advance

  Jose

  It's quite common - there are several discussions about this.

  Simplest solution is to an empty folder on the disc, and drag it to the trash. LR will then work until you restart. You can empty the trash or not. Don't forget to make a different folder when you restart the computer.

• "These files are on a volume that does not trash. You want to remove them permanently? »

  I've never used to get this message when I tried to delete the photos. I read the threads about this problem, but so far I was not able to avoid this message whenever I try to delete a photo.  Thanks for any help.

  It is a problem that appears from time to time.

  A work around is to create an empty folder on the disk and drag it to the trash. LR should then work until you re - start. Empty the trash if you prefer. Don't forget to create another folder when you re - start.

• I get a pop up of XP Total Security that does not allow me to access the Internet. How do I turn it off when the links do not work?

  I prefer to choose my own antivirus program, but I get a pop-up 'XP Total Security' and it crashes me to access the internet, even when I click on the continue link on unprotected. How can I get this program to close and how do I remove it from my computer?

  Hi VCoyne,

  Please see how to DISABLE XP Total Security 2011 alert on my computer

• Is it possible to have a gallery page that does not allow to click on photos to open this project in another page?

  I like the page layouts that are offered with fast access to a site Web MyPortfolio, but there is something I want to change that I can't understand. On the default of the gallery page, you create projects that people can roll and click on open pictures that are in this project in a new page. I want to make sure people can't click on the projects. I want a gallery page where people can only display photos on this page. To me this looks more professional to have projects that people can click on. Is it possible that this can be done? Thank you!

  Hey Corey & Julie

  Currently, Adobe the Portfolio is set up with galleries and projects in these galleries. However we will certainly take this feedback to the team that we broaden our themes + customization options

• Portege M750 - Volume knob does not control the sound

  Hello:

  Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.

  Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.

  Hello

  Have you installed the VAP (value added package) for Win 7?
  EU from Toshiba are page pilot VAP v 1.2.40

• Volume icon does not appear in the notification area

  Miss me my "volume icon" in the tool bar?

  Hi all

  don't know what happened, I did NOT remove myself. All I know is that I add a new update for Java and now I noticed that my volume icon does not appear in the lower right corner where it has always been. Y at - it a fix for this please?

  I have no restore point (although Im positive I did awhile back)

  I can't find the "System 32" which is supposed to be in the 'control panel'. IM exhausted and at the end of my resources.

  Thank you

  Daniela

  I just to have exactly the same problem as Tecian. Here's what I did to fix the problem.

  Open up (Ctrl + Shift + Esc) Task Manager, go to the "Processes" tab, select "explorer.exe" and click on "end process."

  Select the users tab in the youself select Task Manager, and then click the log at the bottom. Connection again and everything should be back.
  Please post if this worked so he could help others.

  YTS.

• Volume icon does not appear in the notification area of the taskbar

  I recently added a logitech webcam.   Since then, the volume icon does not appear in my taskbar.   the only way to adjust the volume on the internal speakers is via the control panel.   How to restore the "speaker" icon?

  Thank you.

  I recently added a logitech webcam.   Since then, the volume icon does not appear in my taskbar.   the only way to adjust the volume on the internal speakers is via the control panel.   How to restore the "speaker" icon?

  Thank you.

  I don't think he has none to do with the webcam. Just a coincidence.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial has 3 methods.

  Method is a general method which, unfortunately, rarely works because the box, you need to check is grayed out (unclickable).

  Two method is only for Vista Ultimate and Enterprise.

  Three method applies to all versions of Vista.
  Use the Reg file download. It is simple and easy.

  * Make sure that you restart the computer to perform the procedures.
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• [SOLVED] Backup Windows 7 gives an error message 'file ignored' for a subfolder that does not exist in Documents

  I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:

  Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
  "Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.

  Is it possible that I can stop backup to find this file that does not exist?

  What happens when you recreate this folder?

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• How to pin a point to move the list that does not appear in the common?

  http://www.eightforums.com/attachments/F1/F11/8991d1348615884-jump-lists-back-up-restore-Windows-8-file_explorer_jump_list.jpg

  I have file Explorer related to my taskbar. In the jump list, I can able to locate an element in the common area. But necessary file appears automatically on the point frequented it take time. I don't know how windows take to put inside of the frequent. With waiting for that appears automatically, is there a way we can pin an item that does not appear in the jump list frequent list?

  http://www.eightforums.com/attachments/F1/F11/8991d1348615884-jump-lists-back-up-restore-Windows-8-file_explorer_jump_list.jpg

  I have file Explorer related to my taskbar. In the jump list, I can able to locate an element in the common area. But necessary file appears automatically on the point frequented it take time. I don't know how windows take to put inside of the frequent. With waiting for that appears automatically, is there a way we can pin an item that does not appear in the jump list frequent list?

  The answer depends on what type of element you want to pin.  The only type of element you mentioned being a folder, you can easily do what you're wondering now and does not need to wait for a later version.

  In the 8 Windows desktop, when you drag an executable file (or shortcut) on the taskbar, a message appears that says "PIN to the taskbar.

  If you drag a document file (or a shortcut), the message will say "pine [associated application]"-in other words, "[name of the default browser] pine" for a html, "Pin to Notepad" file to a txt file, etc..

  For a folder, File Explorer is the associated application.  Therefore, if you open a file Explorer window, look for the desired folder and drag it to the taskbar, the message that appears is "PIN to the file Explorer."  Just click on it, and it will appear in the jumplist FE, above the frequent places, in a separate section called "Pinned".  You can drag things and down from there to order at your leisure.

  (The Control Panel, even if it is displayed in FE as 'File system', only let you pin on the desktop, for not not FE jumplist.)  There may be other special cases like this; I don't know, but it works usually as I've described, including for other system folders.)

  Just to be clear, I am a new user of Windows 8, far from being an expert.  I only know how it works because I heard today by trial and error.  So there may be more to what I can't help with.

• Question SCCM - "LANG_LIST a certain locale that does not match the regional settings of the serial number.

  I have a problem with the error 'LANG_LIST a certain locale that does not match the regional settings of the serial number' recurring.

  I'm trying to install Acrobat XI Std silently by SCCM.

  I used the Adobe Customization Wizard to create an STD which include the serial number of the volume that we have with our license purchases. Note that I am in Australia. I use the command line in SCCM for installation as "msiexec /i"AcroStan.msi"TRANSFORMS = /'D & B_AcroStd.mst' SB ' fails silently. If I install on a local computer using an admin command prompt and replacing /qb in the end, I get the above error.

  I have a few things to try to solve, after searching the forums adobe and other forums for the solution. The mst is only trying to install U.S. English & I even went up to use the Editor directly in the Customization Wizard and change some values in the property table for this problem. In the property table, I can confirm that LANG_SEL_DEFAULT = FRA, REGIONAL_LIST = FRA, LANG_LIST = en_US, ProductLanguage = 1033

  Is there a way to check the language specified for the ym serial number?

  Linda

  I contacted customer service and a live chat session. It turns out that the problem is to use a key volume license, you must download the installer from portal licenses on the adobe Web site. Once I downloaded from there, extract the msi file and used the same transformation, the installation worked.

  In other words, other downloads probably won't work for the silent installation of volume but works by Manuel installs. You will need to download it from https://licensing2.adobe.com/

• JavaScript to create the bookmark on the page that does not yet exist

  Hi all

  Is there a way to write js to a bookmark that goes to a page that does not currently exist?

  For example, I have a 20 page pdf document.  We have FileMaker Pro that can 'Add' to a PDF of additional pages.  So when FileMaker pro adds two new pages (bring us up to 22 pages), I have 2 bookmarks 'existing' in the original 20-page pdf document which, when clicked, will go to page 21 and 22 respectfully.

  Is it possible and everyone would have the JS I would put in this bookmark?

  Thank you in advance!

  Here is what I posted in the other forum that you posted this, in case it might help someone here:

  The JavaScript code would be:

  Go to page 21
  pageNum = 20;

  If there is less than 21 pages, it will go to the last page. If you want to avoid this problem, you could do something like:

  Go to page 21, if there are at least 21 pages
  If (> 20 numPages) pageNum = 20;

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Sites of bookmark in the file that does not appear in the window

  I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

  Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

  The seal shows what is happening.

  What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

  I want to change the four folders listed in the drop-down list.

  What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

  It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.