The driver install Portege 4000 with Windows 2000 Pro
Hi all.
I'm having a small problem with a reinstall of windows 2000 on my portege p4000. Everything seems to work fine except for the wireless. All drivers are in and there is nothing in Device Manager is listed as unmanned, the wireless client shows the connection to my router, but ipconfig shows that there is no link at all.
If I installed drivers and utilities in the wrong order? I would use my recovery CD, but they are damaged.
Is anyone know the correct order to install drivers or where I can get this information?
Thank you very much
Rob.
Hello
The order of the Portege 4000 W2000 facilities:
-Windows 2000
-Chipset utility
-Display driver
-Audio driver
-Toshiba Software Modem
-SMSC IrCC NDIS Miniport V5.1.2500.0 device driver
-Logitech Mouseware
-Toshiba Common modules
-Toshiba Power Saver
-Toshiba Utilities
-Toshiba Mobile Extension
-Toshiba Console
-Toshiba controls
-Toshiba Hotkey Utility for display devices
-Toshiba SD Card Driver
-Toshiba internal LAN Driver
-Driver LAN wireless
-Toshiba Client Manager
-Switch Device network
-Toshiba Wireless Hotkey
-Bluetooth Stack for Windows by Toshiba
-Windows Media Player 7
I hope this helps.
Good bye
Tags: Toshiba
Similar Questions
-
Too bright light on the screen of Portege 3440CT (running Windows 2000)
Hello
Do you know how to reduce the brightness on the screen of the laptop Portege 3440CT running Windows 2000?
I have another question about the 3440CT Portege battery: battery charge never, I can't solve the problem, I left the power supply 8 days but battery levy at all! I had the same problem with a second battery?
Any ideas?
Kind regards
JeromeHi jnessi,
as far as I know, you can change the brightness of the P3440 with the key Fn and F2! Agic otherwise your settings in the tool!
If two batteries are as old as the portege, it may be that this batteries are too old!
Otherwise your electronic of power supply is damaged, but I do not! ;-)Good bye
-
The driver installation fails after custom Windows 7 Pro install
Hi all. I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly. I then reinstalled Windows 7 Professional but now have no way to connect to the internet. I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network. By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):
(PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device
(PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller
(PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller
Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)
(PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller
Any help or advice would be greatly appreciated. Thank you!
Hello:
You need the following drivers:
-
USB Flash drive does not work with Windows 7 Pro 64-bit
I have several USB thumb drives, some of them do not work when I plug them in while others work very well. By experimenting, I reduced the problem with the 64-bit Version Windows. All of these USB keys works well in my other computers that have 32-bit installed and also even computer with the 32-bit version installed on different hard drive. All of these thumdrives are detected immediately and works without a problem. The 64-bit version, I have uninstalles and reinstalled readers, drivers updated for readers and controllers USB chipset, reasigning letter drive without a resolution of the problem.
It is interesting to know that this problem only occurs with some discs that I (like Ativa 4 GB, 4 GB generic and Verbatim 4 GB). While I discovered that you can do all the nonworking day thumdrives work once if you shutdown computer and plug the thumdrive into the USB port and the computer to boot, boot time is longer than usual and when it is operational in 30 to 45 seconds drive appears in the list of devices and you can read, write and format normally without any problem to experiment. When you pull chase him and reconnect to USB port after 10 seconds same problem appears aggai. First of all, you get the message that the disk must be formatted and if you try to format you will get a message that windows cannot format the drive. If you try to access the drive, you get message that Drive is not accessible. If I take this player and plug it from 32-bit without problem, you see all the files in the drive and are able to read the writing and the format is normally.
I'd appreciate if I am able to get an answer as a way to solve the problem.
Pavan
When you disconnected the battery of the laptop, you did, be sure to press and hold the power button for about 10 seconds? This causes the rest of completely discharge power.
This tip came in practice more than once in my experience. ^_^
-
Is it safe to use Portege Z830 with Windows 8 Pro?
I have upgraded to Windows 8 pro on my Z830 - 10 M a few days after the release of win8.
Today, I closed windows8 (all LED's off), closed the computer and put it in a computer bag.
50 minutes later, when I took out the z830 it was burning hot.So hot that I couldn't hold it in my hands without protection.
After cooling the computer, the battery was at 0%.
It was 80% when I shut down the computer.
(I use using the Toshiba, only loading the battery to 80%).Do I have to go back to win7 or just hope that my z80 won't burnout the next time it happens?
> Today I closed windows8 (all LED's off), closed the computer and put it in a computer bag.
> 50 minutes later, when I took out the z830 it was burning hot.I think the laptop is not stopped correctly.
The fact that the battery was empty confirm me my hypothesisSo always make sure that this laptop has been disabled properly before you put it in the back.
-
Driver HP Deskjet 3000 for windows 2000?
Hello, I tried to install my HP Deskjet 3000 printer on a Windows 2000 system and I can not find a suitable driver to make it work. Can anyone help?
Hello
The deskjet 3000 printer is not compatible with Windows 2000, you will find listed by the operating system specified below:
http://support.HP.com/us-en/document/c02231304
I fear you can find no workaround possible as there are no drivers for the device that is compatible with Windows 2000.
Kind regards
Shlomi
-
Satellite 1620CDS - need Multimedia Audio Driver for Windows 2000 Pro
I recently had to reinstall my laptop Satellite 1620CDS with Windows 2000 Pro, but I can't locate the multimedia Audio device driver! and as such I have no sound.
Any advice on how I could find this driver, would be much appreciated...
Just FYI: your laptop has Crystal 4281 audio card. I hope you find the driver on the page given by the previous user. It is in the list.
-
Using a HP DC7900 with Windows XP Pro 64 bit, looking for the audio driver.
Using a HP DC7900 with Windows XP Pro 64 bit, which does not support the HP. I found all the drivers except the audio driver. It's a HD audio integrated with AD1884A codec. Can someone tell me please the driver?
HP supports evrything but XP 64 bit for this system. I already tried the mftr chipset. What struck me everything but audio. So I installed a card SB X - Fi I found laying around.
Thanks for the information!
-
I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10. Is it possible to download Lightroom? I have the DVD with the serial number.
Download and install the trial version of Lightdroom CC.
Then enter your serial number, follow these steps
-
I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?
(1) temporarily disable your security/antivirus software
(2) download iTunes from the official source: http://www.apple.com/itunes/download/
(3) try to reinstall
(4) turn on your anti-virus
-
I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's
an old computer, but it works very well. I want to switch to XP using the Windows upgrade disc. But
in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade. Thanks John
Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.
In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.
-
HP dc 7800 how can I install the driver for serial port pci Windows 8.1
HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help
Hello:
Download and install the W7 AMT driver.
-
Display satellite P30 with Windows 2000 issues
I can't find a driver for Satellite P30 I'm running on Windows 2000. Windows 2000 is the only operating system, I am able to turn it on now. If someone was able to get a P30 works with Windows 2000? Help, please.
Hello
This laptop model has been tested only with the Windows XP operating system and it is not supported with Windows 2000. Sorry, but you won't find any display driver for this device on the Toshiba site. The only way is to try to find a driver on the site of the producer graphic CAD.
I'm not sure but I think that your unit has "ATI MOBILITY RADEON 9700" graphics card.
-
Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2
I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role
I managed to install Windows 2008 server but unable to t the wireless or ethernet to work. I tried to use the driver 64 bit Windows 7 without success.
I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2
Thanks, in advance.
Tour37
Hi Paul,.
Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.
The driver works for Windows 2008 Server R2. I just need to find the drivers for the wireless card.
Best regards
Round 37
-
LabVIEW 2009 .exe works only with windows 2000
I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?
Thank you
dkfire wrote:
If you build an exe on a XP machine, then it will work only on XP.
You need generate the exe on a Windows 2000 machine to make it work.
Simply not true - even close to not being not right.
Chris,
My guess is that the .NET component is not present on the pc of w2k.
Maybe you are looking for
-
Serial number SA50 with wireless networks.
Successfully, I connect to the internet through Wireless LAN communication. But the internet does not work. The State of the connection for example 70 packets sent but zero packets received shows. The packets received is always zero.How can I solve t
-
How to reset a password?
I would like to reset my password for Microsoft. It is related to carolina.rr.com. How can I reset this password?
-
Failed to launch windows vista bridge DX2400-09
I tried to start my computer, but all I get is this screen or a message or another screen saying... 3rd Master Hard Disk: extended S.M.A.R.T. status BAD, Backup and replace F2 to resume
-
CD-ROM/DVD-ROM drive ejects do not.
Original title: DVD/CD ROM DRIVE CD-ROM/DVD-ROM drive ejects do not.
-
What can we do to ensure that my system restore feature will work?
I tried to restore the system. It did not work and all that was said was: unspecified error occurred and the restoration was not completed. Any help would be of value. Gerald Patten