The driver installation of Bootcamp in Windows 10 causing "Automatic repair" and failing to repair

Similar Questions

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• the driver installation failed after startup

  Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

  To install the Conexant audio driver, you must first install the MS UAA.

   

  MS-UAA, ici

   

   OR > MS UAA for XP SP3, ici

  For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

   

    The localization model number

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I'm looking for the driver for canon cp400 pour windows 7

  I'm looking for the driver for canon cp400 pour windows 7

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My win7 is not the driver for my epson stylus sx420w can I download one and where I can get it

  My win7 is not the driver for my epson stylus sx420w can I download one and where I can get it

  If the Epson support site isn't a win7 driver and he only appears not one avilable via the add printer on win7 Wizard is not a

• Problem. Went to my tools and panels is hidden, the can´t find. Try Windows &gt; ménier... and checked. everything is ok.

  Problem. Went to my tools and panels is hidden, the can´t find. Try Windows > ménier... and checked. everything is ok.

  Press the tab key, it shows/hides the panels.

  Or window > workspace > Reset or use another workspace.

  Gene

• I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  Hi hgratz,

  In view of the error "invalid serial number" for Acrobat 9, I suggest you to please visit the doc KB link mentioned below:

  Error "invalid serial number". Acrobat 9 | CS4

  Let me know if this helps.

  Kind regards

  Ana Maria

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

• The driver installation fails after custom Windows 7 Pro install

  Hi all.  I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly.  I then reinstalled Windows 7 Professional but now have no way to connect to the internet.  I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network.  By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):

  (PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device

  (PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller

  (PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller

  Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)

  (PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller

  Any help or advice would be greatly appreciated.  Thank you!

  Hello:

  You need the following drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111787-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111305-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116003-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1

• Is it possible to get Windows 7 (the driver installation) to recognize the HP DeskJet 722C printer. ?

  I have a 722C Deskjet connected via a cable to a computer running Win XP on a network.  I just added a new HP pavilion p2-1102 with Windows 7 on the network.  Windows 7 sees the printer but will not install the driver because I can't use the USB port to connect the printer up so that Windows 7 can use the Windows Update.  Any suggestions?

  Windows Update did not work correctly on some systems, I think it's a matter of Microsoft.  In any case, it is only necessary if the 720C did not appear in the list.

  The next thing to check would be your OS.  You have an 32-bit or the 64 bit version of Windows 7?  As I mentioned above, if you have a 64-bit version you will need to install the patch here after having installed the driver but before printing, otherwise the spooler will break.

• HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

  Hello

  I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

  All the drivers have been installed end, except for the Wifi card.

  When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

  Help, please.

  Hello:

  You install the correct drivers?

  The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

  http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  File name: sp56573.exe

• HP ZBook 15u G3 (T7W13EA #BED): the driver installation failure

  Hello!

  So I received this my new ZBook after updatind to Win10 and several tests.

  Should I be concerned or is this normal and should I disable SA HP and continue?

  Best regards.

  

  Jordan

  What you're saying, you did the upgrade of Win10 - I'd be suspicious of drivers installed Ms.

  If it were mine, I go to this page for drivers and check each of the drives against what is installed Win10: http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=8693772 & swLangOid = 8 & swEnvOid = 4192

  And, when the driver was either older or NOT HP, I would setup the HP driver in its place.

  Then, I'd go to Win10 and disable the driver update: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  In this way, Win10 can not come and force the installation of the wrong drivers.

  Good luck

• Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

  Hello.

  I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

  I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

  The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

  Why the Sun Java Runtime Environment is necessary?

  I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

  Thanks in advance if anyone is able to help.

  Kind regards

  John

  Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

  Satellite Pro P100 (PSPAEA)

  Chipset: Mobile Intel (r) 945 PM Express Chipset
  Memory controller: 82945 PM
  I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

  What I installed...

  03 - display Driver
  04 chipset Driver
  05 - network - upgrade Ethernet driver
  06 - network wireless driver
  09 - sound Driver
  10 - driver CardBus controller with UltraMedia
  12 - modem Driver
  13 - modem region Select utility
  14 Bluetooth Stack
  15 - Bluetooth monitor
  17 Hotkey Utility
  21 - SD Secure Module
  22 - SD memory card format
  28. DVD-RAM driver software
  33 user manual
  TOSHIBA fingerprint digital-software (from Vista drivers)
  TOSHIBA-disk-Creater (from Vista drivers)

  What I do not installed...

  01 - Microsoft Updates (I used Windows Update to do this)
  02. Sun Java Runtime Environment
  07. customer Intel utility
  08 Atheros Client Utility
  11 - touch pad Driver
  16 - C - infrared driver
  18 YPP/power button Utility
  19 utilities
  20 - buttons
  23 - assist
  24 - ConfigFree
  25 - zoom utility
  26 PC Diagnostic Tool
  27 CD/DVD Drive Acoustic Silencer
  29 WinDVD Creator
  30 - RecordNow
  31 DLA
  32 - DVD player

  Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

  The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

  With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

  Hope this helps and please post your results as it is good to share their experiences.

  Regards, Rob

  PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

• I want to connect my Canon Selphy CP1200 again to my computer, but the driver installation fails

  I'm trying to connect my new Canon Selphy CP1200 to my computer, but the installation of the driver fails.

  Hi phxiadydi,

  Please try download and install the latest driver for your CP1200 SELPHY available from the Canon web site.  Please use the following link:

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/mobile-compact-printer/se...

  Once the loading of this page, please click on the tab drivers.  The driver of Windows 7 it will be there.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer