The driver NI-VISA Wizard and command of the SCPI

Hello

I had a go with an assistant driver NI-VISA. I wanted to create a driver for MH3114 DAQ. Assistant hollow went very well, and the driver has been installed.

However when I did * IDN? under MAX, I received an error.

This means that I have to create/put into practice all SCPI commands?

How the wizard is designed to work?

Hi MimiKL,

As Dennis said, instruments are designed to work with the SCPI commands or not. If the user guide does not indicate the device meets SCPI and SCPI commands will not work.

The wizard of the driver simply generates a number of screws that will send the standard commands of the SCPI compliant instrument of the SCPI. Depending on how you communicate with the instrument (bus), you may need to change these screws subtly to work with different instruments. But, as mentioned, if the device you are trying to contact is not in line with SCPI then this is never going to work. Later, when you use the Assistant driver, all the subVIs generated will be have comments in them tell you exactly what to replace and change to get the driver working for your instrument.

If your device is not in line with SCPI and you have a dll that works then you should continue to use it.

Best regards

Chris

Tags: NI Hardware

Similar Questions

  • For the Driver NI-VISA Wizard error

    Hello

    I'm getting a "ERROR-1073807175: field of bLength is incorrect for USB_ENDPOINT_DESCRIPTOR type" this error shows immediately after I click Next on the first screen of the wizard of the Driver NI-VISA.  I see no errors after the wizard creates the USB driver.  In fact, I write for the endpoint device USB 4 using this driver for NI-VISA.  My problem is that I can't read of 3 endpoint.  I don't know if this error has something to do with my problem.

    Is there a way can I fix?

    The version of the Driver NI-VISA is: 5.4.0.49152

    Fixed a problem.  Disconnect the USB hub that is built on my Dell Monitor Help.

    Thank you

    Pablo

  • How to start the wizard for the Driver NI-VISA development

    IM reading this manual:

    http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

    I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

    "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

    but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

    In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

    The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

    http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

  • The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

    The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

    InfiniteNothing-

    If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

    Take care!

  • After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

    After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

    Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

    Could possibly be interfering with the entry Wacom drivers.

    Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

    It also takes more time to start because the BONE is clean some system caches that can also help.

    Try safe mode if your Mac does not end commissioning - Apple Support

  • Basic visa write and read the example

    I use basic visa read and write example to control my temperature controller in fact it works perfectly, but I want something else. First of all, I like to read the value of continuous temperature and it can be read on the read string section but I want to do but digital indicator to see the temperature value is it possible? And what is the function I should use for this? In fact I used the analysis of chain to do but I have not checked but it works or not?

    Second, I have to set temperature sometimes on the controller actually I can do writing tset = 025,0 to set the temperature F 25, it works when I write this command in the Panel (string to write), but I want to do like DIGITAL controller or something like that instead of writing the command for each setting is possible. I want to increase or decrease the temperature by pushing the increase or decrease button instead of write tset = 0.250 / a. could you help me with this?

    Thirdly, I want to run some parts of the program permanently a part when I want to run, as possible, now I have while loop and my example works permanently. I want because when I set the temperature which must not operate continuously, because it is a time command to read the temperature value this section runs continuously as the temperature on the experimental set-up is changing one I have to see this change, for example I set temperature 100 F and the peripheral controller 100 F heat , but this order is an order of time, but read temperature command should run continuously because the temperature is changing and I need to read the temperature for every 60 seconds and I can be a part.

    Make sure that you concatenate text constants "code view".

  • How to use the automatic configuration wizard and where can I FIND?

    How to use the automatic configuration wizard and where can I FIND?

    Hi TannySmedt,

    To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

    The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

    net start wzcsvc

    To stop the automatic Wireless Configuration, run the following command:

    net stop wzcsvc

  • Update of "last Web site visit Date and time" in the Contact record

    Hello world.  I want to see if I can find a way to write a program that will automatically update the field "last website visit Date and Time" in the contact record Eloqua and if they have a SFDC ID drive, push this stamp to SFDC.  I do not make a rule to update or something that will allow me to transmit the data of visitor correlated in good contact record.  Any suggestions?

    Thanks to Pierre in customer support, we now have a solution for this.  The User Guide for the database management (page 28) has a way of creating a progressive input signal to a program that will update web visitor info cross-object of the contact record.  My program is running and works perfectly!

  • Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

    Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

    N ° you need a computer logic board which has built in Thunderbolt.

  • Bought a song from iTunes a week there with the visa card and it is still pending

    A song in iTunes bought a week with my Visa card and it is still waiting on my Australian Visa account, I called my Bank today there is nothing bad to that end, I'm still waiting for some types of permission by e-mail, you're wondering what I did wrong, hoping someone can help me please.

    As well as receive a receipt by email from iTunes (which is that what you mean by "some type of permission email"?), it should show on the purchase of your account history: see your purchase history in iTunes on Mac or PC - Apple Support store

    Or if iTunes was not able to collect the money from your card successfully it should show as the reason: pay a balance on the iTunes Store - Apple Support - there show nothing? If not, this implies that it is crossed successfully, but purchases by credit card can sometimes take a long time

  • What is the best way to backup a hard drive full of pictures and videos on another external hard drive?

    What is the best way to backup a hard drive full of pictures and videos on another external hard drive? I want an exact clone-

    Drag and Drop? Time Machine?

    Thank you. DB

    < object edited by host >

    If you want an exact clone, you will need to use a utility like utility disk, Carbon Copy Cloner or SuperDuper!

  • the internal HARD drive has been corrupted and I fails to make the back upward. need information.

    I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

    Hello:

    There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

    http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

    What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

    This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

    That assumes you can read all 25 characters of the product key windows 7.

    Here's how...

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

    Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

    http://h10032.www1.HP.com/CTG/manual/c02666702.PDF

  • Network driver is not installed and have no option for the wireless

    Hello

    My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.

    I've seen previous posts that you need network controller ID for this problem, they are:

    PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01

    PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C

    PCI\VEN_168C & DEV_0036 & CC_028000

    PCI\VEN_168C & DEV_0036 & CC_0280

    Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.

    Appreciate your help.

    Best regards and thanks,

    Jeff.

    Hello

    Please try:

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

    You also have the following for Bluetooth:

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe

    Kind regards.

  • 4415 proBook s: replacement of the optical drive - need a support and screw

    Hello

    I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

    I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

    Thank you very much for the help.

    NuttySquirrel wrote:

    Hello

    I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

    I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

    Thank you very much for the help.

    Wait, I don't understand it how can you lose this part if you already work on it? And for your parts, you should look on eBay if they have this hardware and screws for your car as well.

  • Uninstall the Driver nor visa 3.0.1 to install 4.2

    Hi all

    I need to install the Driver or visa 4.2, but should I uninstall visa or 3.0.1 firstly to let the 4.2 to be effective.

    But I have some problems to uninstall the Driver nor visa 3.0.1.

    I wait your help for how to uninstall it.

    Thank you

    Thank you for your attention.

    I'm new on this. I just found how I can uninstall it from Add/Remove control panel part.

    Thanks for your time

    Problem is solved.

Maybe you are looking for

  • HP Deskjet 845c on windows 7 64 bit

    Hi evry bodyI can't install my printer on Windows 7.However, it is succfull installed on Vista.Help! Please, where can I find these drivers!

  • With the help of laptop recovery

    I have a Pavilion laptop G7. It came with a recovery on the hard drive partition as well as instructions on how to create a recovery media. Just two questions: (1) other that using different steps, is there a difference between the use of the partiti

  • Former driver nVidia NVS104M needed

  • malware has damaged, is there a system to SP3 File Checker

    This would be true practice to add to the difficulty It Center. Most of the people not the SP3 update online and the their CD SP2 System File Checker will not work. Specifically, all my USB drives will launch is more like a real storage unit unless I

  • Lexmark x 6650 printer

    Printer worked fine with 8.0, post-installation 8.1, the printer will not work. Can not find the driver that will work with 8.1. Suggestions?