The dust under the screen - repair or exchange of the conditions

Similar Questions

• iPhone 7 dust under the screen

  Hello everyone I see a dead pixel or dust under my iphone 7 jet black 128 GB should I go to apple?

  If there is dust under the screen, it's a hardware fault.  Bring the phone to Apple for the Exchange.

  Best,

  GDG

• Unbelievable, dust under the screen of the iPhone 7

  Good night everyone.

  I've posted a few times before here in discussions about the dust under the screen of the iPhone 6 s, which mine was when I bought it, when they changed my screen 9 times and when they exanged to renovated ones and even an Envoy to Ireland brand new with new warranty at all.

  Last Friday I went and waited all night to buy an iPhone 7 hoping being dust-tight its screen would be perfect, and as I got it, I saw something under the protection of screen thinking it was something that got stuck all by placing, but today, I deleted and found which can be seen in the attached picture (he can be seen in the crossbar left angle)

  Is it not possible to exchange it for another iPhone during the day 14 guarantee now that West no stock?

  Thank you very much

  1st world problems are something to see indeed!

• The dust under the screen of the Qosmio X 500

  Hello

  I purchased a Qosmio X 500 to Saudi Arabia in April last year and Ive brought to the India where I currently reside. Last week when cleaning out my screen randomly, I noticed a few specks of dust in (lcd/led panel below). This does not preclude my intervention on the machine, or are facing other problems of performance. but the presence of these particles of dust under the screen gorgeous 18 '' becomes a horror.

  I hardly take the laptop outside or use in difficult or dusty environments. I have a guarantee of the EMEA which is valid until April 2015 and I intended to ship the laptop in Saudi Arabia to rectify. Any suggestions on this subject would be greatly appreciated.

  Thank you and best regards

  Dr. Abdel Ansari

  Hello

  In my opinion, you make the right choice. Laptop has guaranteed EMEA for Toshiba in Saudi Arabia service provider will help you in this. Of course, laptop must be disassembled and cleaned.

  Good luck and I hope everything will be OK.

• The dust under the glass

  Hello world!

  the has found several pieces of dust under my glass of ion - x in the lower left corner. Nobody knows: our limited warranty covers this issue? someone face thing? It's ok, or his problem with adhensive, which keeps the front glass?

  

  Hello

  If you can see the dust under the glass of the watch face, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch repaired under warranty:

  https://www.Apple.com/support/watch/contact/

• Remove the dust under the glass of Photosmart C6180

  I have too much dust under the glass of my Photosmart C6180 and makes ugly scan.

  Is there a good method of-it-yourself?

  Thank you

  Rick

  Hello Rick6T-

  Really, there is no easy way to do it. I disassemble a similar printer and there are a lot of parts. If you try, take before photos and keep all the screws sorted.

• Trying to send emails through my scanner/printer and my window that educated told me that program file could not be installed or to load and go to the Help menu under 'detect and repair '?

  through my scanner/printer and my educated place window tells me that program file could not be installed or to load and go to the Help menu under 'detect and repair '? I need help with this

  Hello

  you say not what e-mail program, you use!

  It takes a lot more information

  ______________________________________________

  see if this applies:

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• BlackBerry Passport passport (AT & T version) - the dust under the front facing camera

  I've had my Passport AT & T for a little over a month now and absolutely loved.  However, my front facing camera has a considerable amount of dust under the glass.

  Is it possible that I can clean myself?

  If this is not the case, what should I do?

  Thank you

  Tyler

  Contact AT & T for warranty replacement.

• sony screen repair

  Hello, I broke the screen of my phone in the summer. Then I sent it to sony for repair (150th cost). now it's been 2 months and the phone is still under repair. I contacted sony support 2 times but they are useless, they don't know anything about the condition of the phone. How long should I wait before returning the phone? a similar case? The phone is being repaired by slave children in third world countries? Sony operates the world?

  Please send me your contact information and service/repair numbers and so on in a PM, and I'll see what I can do.

• Prevent the child class dependency when the conditional use disable to specify the class in the development environment

  Hello

  I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

  To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

  The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

  To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

  I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

  This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

  To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

  If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

  So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

  Thanks in advance

  John.

  I feel your pain.  I came across something similar some time back.

  Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

  I also much prefer the method you describe...

• "All the conditions are met" - not exactly?

  Hello again! I'm experimenting a little, set up a mock up of the slightly more complicated project of Captivate to help some of my practice of co-workers with Captivate. I am under a problem but with one of my examples:

  I put a map of the world and six text entry areas to invite a user to name the continents (except Antarctica). I attributed to each box TE an associated variable where it is placed, that is the entrance area of text on Europe is associated with linked a variable titled 'in Europe. I want the slide does not advance until all mailboxes of YOU are properly labelling of each continent.

  Currently, for each main entry text box, rather than by a single shipment, a peak action occurs which assigns the associative variables with a literal name. For example, for action advanced in North America, marked NA_Check, it has an action to display a caption saying 'okay' and assign the NorthAmerica variable with a literal: "North America".

  An advanced global action runs when a user is trying to push a "Continue" button that checks the State of the variables. The conditional action because its properties 'if' that all the conditions are met with Asia = 'Asia', Africa = 'Africa', etc. of all human beings "AND". I assumed that with all of them being 'AND' they must all be true for this check properly. However, I have separate legends for the success or failure, and for some reason all I have to do is to get two correct and I can go forward as if I was 100% correct.

  I thought that maybe it had to do with the variables being assigned prematurely, so I made an action on enter which assigns each variable with "0" so that the entry in the text box would be the only way to make the correct variables. This doesn't seem to work. Any thoughts? Why only do two of the 6 conditions for success when I list all necessary?

  I'm not sure. Maybe a bug in the code of Captivate?

  I think I might rather assign some values to variables and do some calculations, and proceed only if the result is equal to a specific value.

  But that's just me... Rick

• Topics marked with the conditional tags still appear in the documentation

  Hi all

  I have a big problem with RoboHelp 7.

  I defined a new conditional tag (I have 2 together) and I mark the topics in the table of contents with relate to this tag conditional, right?

  When I generate the chm file, everything is OK. The headings marked with the conditional tag do not appear in the table of contents that I specified to exculde subjects marked with this conditional tag.

  When I generate documentation however, everything is still in the document even if I was clear that I don't want these subjects to appear.

  Can you please tell me what I'm doing wrong, or how can I properly so that I get my results?

  I am using Windows XP Pro and RoboHelp is updated with all service packs.

  Thank you

  Bogdan sailor

  Right-click a topic in the table of contents and select apply the tag build conditional. Check out the new / Multiple option.

  This screen displays.

  

  You can clearly see if the tag is applied to the table of contents or the subject. If it is applied on the subject, so it will be not when generating table of contents entry will be automatically deleted. If it is applied to the table of contents only, he is always in the build.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Reports - the values of the checkbox and the conditional column visibility

  Although I use Oracle databases for many years, I must admit that I am rather new to APEX. I build a first prototype project to convince our project managers and managers of the usefulness of the product for future projects (as for interfaces Visual of the database where the focus is on forms and reports, it is often quicker and cheaper to build an APEX application instead of a webapp in Java or c# full blown).
  
  I have a few problems however.
  
  I'll start with a quick description. I have the following structures of parent/child:
  
  Provinces > cities > Intersections > earrings > detections in loop.
  
  Basically, I want to do a report on detections of loop. Now, as we have thousands of detections someday, I did kind of a mining structure down. First, you choose your province, then the city, then the intersection and finally the loop. Do not use the lists to make the selection. Instead, I did a (classic) report on each side because it allows me to give detailed information for each part. In each report, I made a link on the identifier. For example, when I select a province (by clicking on the link), I pass the identifier of the province of cities report and use it in the query to restrict my report to these cities in the province. I repeat these step for different parts, which, in the end, gives me the selected loop loop detections. The good news is that all this works very well. However, the person who will use this application made a suggestion and asked if it would be possible to select different loops and thus get the detections for several loops (the rest of the application remains the same). However, this means that I can't use the link in the column more. Now, I thought in the sense of a checkbox control. The link to the column is still there, but the user would also have the possibility to select several items in the report. I have managad to add a checkbox control to the report, associated with the loop identifier column. It's not really hard. I can't understand, however, how I can pass the identifiers found in the next report (detections for the selected loops) and use it in the report's underlying query. The problem is, I do not know how to pass the values checked to the next page and how to use these values in the request of the State of this page. I guess it must be possible, but I couldn't figure out how. I tried to play with APEX_APPLICATION. G_Fxx and others. Don't forget I'm a newbie and this seems to be more advanced features.
  
  I downloaded the images from the 2 on the pages of the report to illustrate:
  
  http://img96.imageshack.us/img96/1497/apex01.jpg
  
  http://img140.imageshack.us/img140/9868/apex02.jpg
  
  A second point that's bothering me is this. In the loop detection report, I show a link column (I chose an icon instead of the value of the column) for each line. I also have a column that displays the number of detections for the given line (and one day). Now, for some lines, there is no detection that has emerged. Therefore, there is no point in the selection of this loop, because the result will be a blank report. However, I still want to show the loop in the loop selection report, as it is always present (it is not as if he suddenly disappeared). Of course, no big problem and most users probably have sufficient intelligence to understand this. However, it would be nice if I could do the icon (link colum) visible only for these loops with detections, or in other words, for these recordings in which number_of_detections (COUNTY of underlying column) is greater than 0. I couldn't find a way to do it either. The conditional display for a column option didn't really offer me a solution here.
  
  Before I forget, I use APEX 4.0.1 on an Oracle XE database.
  
  Any advice or suggestions would be welcome! :)
  
  Thank you.
  
  Erwin

  Hello

  You mean something as in this example
  https://Apex.Oracle.com/pls/OTN/f?p=40323:55

  You can store the values checked into collection and then use it in another report where clause

  See for example this post for how you can memorize checked lines to the collection
  Re: Need help with APEX_Collection

  In the sample report DEPT query is

  SELECT
    CASE WHEN EXISTS(SELECT 1 FROM emp e WHERE e.deptno = d.deptno) THEN
      APEX_ITEM.CHECKBOX(1,c.c002,'onclick="saveDeptChk(this,'||c.seq_id||')"','true')
    END AS row_selector,
    c.c002 AS checked,
    d.DEPTNO,
    d.DNAME,
    d.LOC
  FROM dept d,
    apex_collections c
  WHERE c.collection_name = 'DEPT_CHK_COLLECTION'
    AND d.deptno = c.c001
  

  And the report on EMP

  SELECT e.EMPNO,
    e.ENAME,
    e.JOB,
    e.MGR,
    e.HIREDATE,
    e.SAL,
    e.COMM,
    e.DEPTNO
  FROM emp e,
    apex_collections c
  WHERE c.collection_name = 'DEPT_CHK_COLLECTION'
    AND c.c002 = 'true'
    AND e.deptno = c.c001
  

  Kind regards
  Jari

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• remove the conditional compilation expressions

  I created a RH7 project, and it has expanded to become the sole source of our company for the documentation of the user. It's a good thing. However, as I added information to different audiences, I'm done with a number of conditional compilation expressions I need is no longer. I would like to delete, so I don't have to search a long list on the general screen of WebHelp.
  I searched the forum and didn't see any information on the removal of the conditional compilation expressions (tags, yes; expressions, no). Can someone tell me how to proceed?
  Thanks for your help!

  Thank you! It did exactly what I had, so I'll mark this message as answered. Appreciate the quick response and all the information you have made available through the forum, as well as on your site!