The E3000 does support 5 GHz channels > = 149 or only 36-48?

Hi, I have read various messages of the forum saying best performance of a wifi router, you must use the channel 149 or MORE and only 36-48 have a lower signal strength and therefore less range and speed.

I live in New Zealand and when I select the drop-down list for the 5 GHz band wireless channel he mentions only 5 options - Auto (dfs), 36, 40, 44 and 48. I read the posts of the forum of people saying you should switch to 149 or more and I saw some screenshots showing the drop-down list with 149 selected. But I did not have this option.

If I check status > Wireless page, it shows that the channel 36 is used (for automotive).

I'm doing something wrong? E3000 in this part of the world do not support 149 etc.?

I spoke in a live chat with a support representative who told me that all the E3000 are the same everywhere in the world and there was little or no difference between them in the firmware. I was also told that 36-48 strings are high gain and so there is no need for other channels, which contradicts the other articles I've read what 36-48 state are weaker channels.

Can anyone shed light on this sone?

Thank you.

It is forbidden to put an access point wireless statically on a higher channel. All channels except the four listed should be used with DFS.

See http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-5ghz-channels/m-p/393155

Tags: Linksys Routers

Similar Questions

  • No noise in the right of the eMac G4/1.42 Ghz channel

    The sound is off in the channel on the right of my eMac G4/1.42 Ghz model. Is it easy to fix? What would be the likely culprits? This could be a short circuit in the enclosure itself or a sound card is shown?

    Also, I run a few synths on this computer using a firewire (MOTU 828) interface. The sound would still be there it out via the firewire port? What is a good way to test for the specific problem?

    I'd also appreciate a link to the manual for repair for this model, if it exists.

    Thanks a lot for your help!

    Tom

    This is a web resource:

    http://www.PowerBookMedic.com/manual.php?ID=60

    No more, I am wary of sites saying they can provide free textbooks because too many of are based in a part of the world-renowned for websites are not what they seem.

    For what is a source of tone, I would use the sound system preference because it is a source of tone based on the system and you can play with the left/right balance. This eliminates a cable intake entry or jack as a contributor to the problem.

    eMacs aren't easy to take down due to the proximity of the video components high voltage. With the A1002 there is also a high risk to destroy the power switch during reassembly, if not done with extreme care.

  • The T61 does support Windows x 64?

    Hey guys I'm uprgrading my memory in my T61 7663-13U to 4 GB and I was wondering if my laptop supports 64-bit Windows. Because if he doesn't not I don't bother upgrading.

    Thanks for any help.

    Also if he does, does anyone know of good memory at low prices?

    Welcome to the forum!

    Yes, your computer supports 64-bit operating systems, be it Windows or anything else.

  • Acer Aspire E1-570 does support RAM dual channel?

    I installed the program CPU - Z and it says that my laptop uses the RAM single-channel mode. Support dual channel mode and how to change mode dual channel?

    Felix_Aliaj,

    I don't see dual channel support listed for the memory of this system.

  • The SL1 does support Auto ISO in manual mode?

    Hello

    The SL1 meter properly in manual mode and change AUTO ISO?

    Thank you.

    Yes, he does.

  • The WGA600N can switch between 2 channels?

    I hope that I am not on something, but I can't find an answer to my question.

    I have the WRT610N simultaneous dual band router paired with a WGA600N wireless dual-band adapter.

    With the router, I set myself to 2.4 and 5 GHz channels separate SSID and WPA2 encryption keys.  My adapter, although it can 'see' the two networks, connect only to one. On the product for the WGA600N support page, it says clearly, "dynamically travel channels and wireless networks based on the quality of the actual signal and a link for maximum availability and reliability of connection."

    My question is... How can I activate my game card work on the 2.4 and 5 GHz channels to find the best connection?  It seems in the WGA600N Setup, it makes me choose a channel.  Both channels on my router must be on the same SSID and the same encryption key for the adapter to switch back?  Should I switch to WEP mode?

    On your Linksys card, only a single frequency could serve both (2.4 GHz or 5 GHz), although it could pass the frequency... Access your game card and go to the Wireless tab on the Basic tab, select 802.11 2.4 GHz and 5 GHz band... 802.11 mode should be mixed 802.11na, 802. 11A, 802.11ng, 802.11 g, 802. 11 b, let the rate of automatic transmission and channel width should be 20/40 MHz...

    Be sure to set the security WPA (not WEP/WPA2) wireless...

  • Qosmio F750 does support NVIDEA 3D Vision with glasses?

    Hallo!

    the portable actiually supports 3D without glasses. But I have another question:
    the F750 does support 3D * with * glasses? I want to wear glasses from NVIDEA 3D Vision. According to NVIDIA, specification for the glasses the F750 must be supported. But I can't put the 3D mode. I installed the new dreiver and BIOS 2.0. In framework of NVIDEA is now 3D appeared. To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

    Can you help me please!

    Kind regards
    Doxtor

    > To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

    So this is not supported would need an external monitor that supports the 120 Hz

  • Support of virtual channel of Port Cisco Nexus 9300

    Hello

    As I'm new to Nexus 9300 and I was wondering if the switch can support virtual port channel (VPC)? I was wondering if there is any matrix of functionality compared to the 9500/N7Ks/N5Ks

    Any suggestion is appreciated.

    Thank you.

    You can configure VPC on the 9300 series NX - OS mode. The selling point for the Nexus 9 k series is generally well mode of ACI, which would usually be deployed in one focused on the leaf tissue and the topology of the backbone.

    In a fabric that we use equal cost Multipath and don't have a VPC configuration designed to reduce some limitations of the spanning tree in classic Ethernet.

    Take a look at the Cisco Live presentation BRKARC-2222 for a good overview of the architecture and design of Nexus 9 k.

  • Does the Y570 Builtin Wireless Support 5 GHz band?

    I can't find supporting the 802.a only b and g

    It supports 5 GHz. or not?

    I don't see the 5 GHz. wireless network in my house only the 2.4 GHz. and I do not see the 802.a in the advanced properties of the wireless

    I agree with Duck3. Short answer, no.

    Intel Wireless - N 1000 is only B/G/N, none. So no ability to 5 GHz.

    DragonRider

  • My MAC Book Pro does support Wi-Fi 5 GHz?

    Dear,

    I need your help. I'll try to find the WiFi 5 GHz, but it does not appear in my Mac Book Pro while other computers and my Iphone 6s can and works perfectly. I don't know whether or not my Mac Book Pro supports 5 GHz. I would be grateful if someone could help me. Here are the details of my Mac Book Pro.

    MacBook Pro (13-inch, mid-2012)

    2.9 GHz of Intel Core i7 processor

    8 GB 1600 MHz DDR3 memory

    Card type: AirPort Extreme (0x14E4, 0xF5)

    Firmware version: Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

    MAC address:

    Locale: ETSI

    Country code: QA

    Supported PHY modes: 802.11 a/b/g/n

    The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 149, 153, 157, 161, 165

    Wake On Wireless: support

    AirDrop: support

    Status: connected

    Million thanks in advance!

    The simple answer is no.

    DISPLAY

    Built-in display 13.3 inch (visible diagonal) backlit by bright panoramic LED
    Resolutions 1280 x 800 (native), 1152 x 720, 1024 x 640 and 800 x 500 pixels at 16:10 aspect ratio x. 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 format; 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 extended format; 720 x 480 pixels at 3:2 format. 720 x 480 pixels at 3:2 format stretched

    GRAPHICS

    Graphics card Graphics Intel HD 4000
    Graphics memory Up to 1 GB of DDR3 SDRAM shared with main memory
    Connection of the screen Digital video output Thunderbolt
    Display stand Support for up to two screens Thunderbolt
    Display modes Dual extended display, copy video and AirPlay Mirroring
    External resolution Up to 2560 x 1600 pixels
  • SONY VAIO F Series SVF15412CXB does support dual channel memory?

    SONY VAIO F Series SVF15412CXB does support dual channel memory?  Or is it only a slot?

    I'm curious to know if I can put a second stick of RAM in there for performance dual channel.

    Hi gremark,.

    I understand you want to be sure of everything. I checked the service manual for this model and even tried to open a laptop of the same type and I can assure you that this model supports the double delivery. You can add up to a stick more than 4 GB of ram to increase the memory capacity.

    ~ Mark

  • The update of the BIOS for Satellite Pro M70 does support TPM?

    Hello

    There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

    Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

    Can someone check and confirm please... :)

    And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

    And a BIOS may be downgraded?

    Thank you.

    Hello

    (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
    That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

    2.) now something about the second question:
    The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
    Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

  • Satellite Pro U200 - does support the DVD double layer?

    Hello

    Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

    Kind regards
    CCBC

    Hello

    It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

    To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

  • Satellite L30-134 does support dual channel DDR2 memory

    Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules?

    Wojtek cordially

    Hello

    Of course, the Satellite L30-134 supports DDR2 memory modules.
    I found a few listed on the Option & Accessories site of Toshiba Europe site:

    What are supported:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

  • HP Envy 700-214: the HP Envy does support the 750 Ti FTW Evga GTX edition?

    As the title suggests, the edition of 750 Ti GTX FTW Evga does support my office? I am currently engraged by the integrated graphics card because I can't run games on the settings I want and instead I have to stay with the lowest settings. I don't know if my BIOS version is supported by the card. I have again the dinky power came with the computer and if someone can tell me if it has the connector 6 - pin PCIE, which would be lovely. Also, it would be great if someone showed me a picture of the 6-pin PCIE if there. I thank you for reading, have a nice day!

    Hello

    Your PC should be able to support the NVIDIA GTX 750.  Generally the NVIDIA GTX 750 with a few exceptions only requires a 300 Watt power supply.

    HP 460 watt power supply has a PCI-E power connector 6 pin.

Maybe you are looking for

  • I have problems with the connection of the microphone

    Hi, I bought a headset hs850 draco predator and they work as headphones only, but the microphone does not work. They do not use usb but the other two sons. Can I do the microphone work?

  • Identify the computer IP addresses

    Hello world How to identify individual IP addresses of the computer and confirm my own? How to identify the geographical region/city of the different IP addresses? IP addresses seem to have 9 numbers - XX. XX. XX.XXX - Sign these individual computers

  • What is net framework client profile 4?

    I need net framework 4 client profile I downloaded myself I think ws suppose it is. I have windows xp 32-bit, what is it year I delete it. Thank you

  • partitioned disks

    I have 3 drives partitioned on my Windows 7 HOME machine: C being the "Startup disk" with all my programs and data ~ understood! Here's my dilemma: E is called '' reserve system, '' and contains 3 files when the poster: a $recycle.bin, a startup fold

  • Update from blackBerry Smartphones to desktop manager 5.0

    I'm running 4.7 when I say it looks like updates it is 5.0. It downloads runs through the installation process and said it was over. However, when I restart it still shows 4.7 with a 5.0 download waiting. Any suggestions?