The edge mode a Veriton M275 SATA AHCI is greyed out

Hello world

everything on the subject, please help.

I want to give the full power of Xubuntu.

Google manual repair m275

Tags: Acer Desktops

Similar Questions

  • Effect of mixing on the edge Modes animate

    Hello

    I was wondering if it is possible to apply the blending in edge mode animate.

    Like having 2 divs mixture, a green and red light on a black background.

    Something like color Dodge effect and operation of the lights in a dark room.

    Too much?

    Can I import plug-ins?



    Thank you.

    Hello

    You can load an external stylesheet using yepnope. But there is a constraint, you must add ! important.

    As you said, you can use c for the style, but you can also use code.

  • Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

    Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way? Keep in mind
    This associated heat does not always mean too much heat as it is often a part or a component
    who is too sensitive to normal levels even heat.

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    Check with these utilities to see if information may be collected: run BlueScreenView
    to see if there were any BlueScreens and verify in MyEventViewer at shutdown
    (or a few seconds before) See the event log contains useful information.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
    or time of the BSOD or event to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it a bit before and after the time of the event or BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
    application of all accidents occurred in your system. The information breaks down is extracted from the
    .WER files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • The text box to define a start page is greyed out and I can't change the start page.

    When I go to the Options screen, the "Mozilla Firefox Start Page" text box is gray and unchanging. If I navigate to a page, and then set that as my start page, close and restart Firefox back to the Firefox/Google homepage - my homepage setting is not saved.

    I tried to reset Firefox, restart with Add-ons disabled, even delete and recreate a new profile, but he always does.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • All of a sudden I lost all the lost sounds of everything. Control areas sound greyed out, not from his Panel icon... Also lost MS Security Essentials in the wake of Comcast "upgraded" My Modem.

    The installation of a higher speed of WiFi Modem by Comcast cause suddenly made me lose (the next day) the two of my sound, icon etc. AND the complete loss of MS Security Essentials also overnight.

    MSSE does not charge again even if it is still listed in my «All programs» Population I get an error message to Sign On: 'Microsoft Security customer '.
    is not a valid Windows Image".

    Should I uninstall from Add/Remove programs the MSSE ghost? Have no idea how to get her back.

    XP SP 3. Firefox.

    Thanks hope that there is enough detail.

    [Moved from comments]

    Hello

    You can use restore points to return Windows XP to a previous state when your computer was working properly. System Restore takes a "snapshot" critical system files and some program files and registry settings, and then it stores this information as restore points. If your computer is not working properly, you can use these points to return Windows XP to a previous state when your computer was working properly restore.

    How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084?wa=wsignin1.0

    Note System Restore does not affect personal files, such as e-mail messages, documents or photos. You can only restore files that you have deleted if you have made backups of these files.

    Thank you.

  • Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

    Dear Experts,

    I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
    In dell 3020 I deploy the image using ATA mode.
     
    Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

    Thank you!

    Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

    AHCI is the only option available in the modern Bios and chipsets.

    The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

    https://Downloadcenter.Intel.com/download/25165/

  • Tecra A9 - compatibility/AHCI in the BIOS mode

    The Toshiba Tecra A9 seems to have a serious lack of implementation of the BIOS: it has an Intel ICH8 - M - SATA controller capable of running in Intels so-called "handset Mode" that allows it to act as a controller SATA AHCI, a normal IDE controller or mix the two for various channels.
    The BIOS allows to adjust it to the "compatibility" - mode that seems to work correctly by running in the IDE for all channels mode, but the mode "AHCI" seems to be set up wrongly. AHCI is a standard for SATA devices that is widely used and the Tecra A9 defines only the hard disk to use SATA AHCI - optical drive CD/DVD-ROM rest in IDE mode which leads to conflicts of pilots as only one driver can access the controller in DMA mode - when the value of both SATA and IDE modes, two drivers are needed for one physical chip.
    'AHCI' in the BIOS must activate the peripheral subject connected to the controller is running in SATA AHCI mode, but as I already said, it is not. Only the hard drive will be displayed as SATA device.

    For me, this looks like a defect in the BIOS that needs to be repaired.

    Best regards
    Peter

    Hello

    I think that it s perhaps a default, but you done already encountered problems with the execution of the "compatibility mode" where the CD/DVD drive (IDE ;)) works in "IDE mode"?

    Do you have a few mistakes or something similar? If so, then it s probably REALLY a bug, but if not, maybe this 'combined mode' (I know what you´re talking about my old 875P Chipset and my ICH5 have the same thing) works correctly.
    In my machine (desktop computer with a DFI Lanparty 875P and northwood at 3 Ghz) runs in the "handset mode" so that everything works to make it compatible in "IDE" mode But I Don t a loss of performance.
    It s not as fast when I drive in pure SATA mode, but then my DVD won't work.

    So, if you have problems with the machine then I agree, otherwise "it s not a bug, it s a feature" ;)

    Welcome them

  • Equium P200D how to enable SATA AHCI mode so I can install OSx86

    Hi im trying to install OSx86 on my new laptop Satellite P200D-139 I bought this week.
    I need SATA AHCI mode value. All other pc, I used, I was able to do it in the bios but with this laptop, the bios is so cut off from the option isn't there.
    Does anyone know how to enable AHCI mode so I can get OSx86 to start.

    Thank you
    Mark

    If I'm not mistaken, you get the famous message "still waiting for root device", right?
    Well, I really do not have much experience in the Mac OS, but it appears because of SATA drives and Yes, you're right, AHCI mode works for most of the laptops or desktop computers.

    I think there is no way to activate this option. But you may find help looking for some instructions on osx86project in google.

  • Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

    Hello world!

    Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

    (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

    (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

    (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

    I'll be very grateful for any useful info! Respectfully, Tianuchka))

    Hello:

    I would use it to HP... the description tells you what it does.

    The HP 6910P has the same controller and chipset as the 610 HP.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

    Who answers your questions first 2.

    Regarding the 3rd, I don't know whether or not you notice an improvement.

    If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

    Download, unzip and run the setup.exe file.  Then restart the PC.

    https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

  • Acer Veriton M275 of does not start after the opening and closing of the case.

    I was about to update with an SSD HD, so I opened the folder and discovered there is no extension SATA ports. Private affair and now system put, CPU fan runs but no display or power USB for keyboard and mouse. Have you tried bypassing the switch of intrusion with a rider-no difference. Tried to remove the battery to reset the CMOS-no effect. Have reinstalled the case and tried without effect. Help

    Turned out to be bad RAM stick. Thank you.

  • No SATA AHCI driver for 6440 b

    Hi all!

    * Yes, I have read the sticky on the SATA drivers - did not help.

    Us have just bought 5 laptop computers HP 6440 b to test (and would buy a lot more), but we have a problem with the installation of win XP on it when mode = AHCI - just SATA cannot find a driver for it! The latest Intel Matrix Storage Manager driver does not contain the AHCI drivers for these:

    Hi again,

    Slipstream only 6 Port of PCHM SATA AHCI Controller driver with your XP CD-DVD "blank." Use this driver Intel Sata.

    There is error in the guide that I found.

  • driver SATA AHCI of 64 - bit - Compatible with HP 6910P or not?

    I have a HP 6910P 64-bit Windows 7 Professional.

    I've recently updated the primary drive to a HARD drive to 120 GB for a 128 GB SSD. However, the performance gain was minimal.

    Checking, I discovered that AHCI is not enabled and there is an option to do so in the BIOS (to date).

    The HP Web site lists a compatible 32-bit version (7.6.0.1011 REV: C) SATA AHCI driver for this model of laptop.

    However, despite quoting the same version (7.6.0.1011 REV: C) the 64-bit version does not list the laptop of HP 6910P under the list of compatible hardware.

    Is it simply an oversight or is there a valid reason, why the 32-bit version of the driver is compatible so that 64-bit is not?

    You are the very welcome, Drambo.

    I have provided the driver because I thought that you would just install the driver mode IDE restart and change SATA configuration native from disabled to "Enabled".

    Since you changed to "Enabled" SATA Native Mode and then reinstalled W7, you need do nothing else.

    How can you tell that the AHCI is enabled?

    Go to Device Manager and click on IDE ATA/ATAPI Controller section.

    You will find your controller SATA AHCI enumerated (Intel(r) ICH8M-E/M SATA AHCI Controller).

    If the BIOS has not been set to AHCI, the controller would have said, it was an ICH8 Serial ATA Controller, or words to that effect.

    Paul

  • Suspended at the end of the installation of Vista (pre SP1) - Sata drive problem - how do we install?

    Hi, my Dell Studio Hybrid desktop is hang on installation (new installation on a formatted hard drive) from Vista to the installation step ends.  After much research it seems that it is a matter of pre Vista SP1 associated with SATA drive/drivers.  Installation crashes because the computer is looking for a driver on the CD-ROM that is not there.  Anyway I don't see a driver relavent in the cross-section of the hybrid (another computer have drivers under the SATA drives) and if I did I don't know when to add it (load the section of the driver during the installation process?).  Any help on this topic and how to proceed with the installation of vista would be much appreciated since I just lost my weekend to this.

    Hello

    You are right that there is no drivers sata on your computer because you don't have that one hard drive go in the bios as described here .and put AHCI to IDE

    Integrated Peripherals

    Allows you to enable or disable these integrated devices: HD Audio, Onboard LAN connector, Onboard LAN Boot ROMand side logo. Serial ATA Configuration can be set in IDE or AHCI mode.

    then install your version of windows you should have no problem now.

    Good luck

  • E520 - driver Intel SATA AHCI Controller driver for Windows 7 (64-bit)

    Hi guys, can I apply for assistance with Intel SATA controller AHCI Driver for Windows 7 (64-bit), please? I went to the drivers download page and I chose my laptop (ThinkPad Edge E520 1143 - 37G), then the pilot of storage, but when I click on Intel SATA AHCI Controller driver for Windows 7 (64 bit) nothing happens. 32-bit is available for download tho. Thx a lot for suspicion

    Hi trueblue666,

    I sent lenovo feedback to his subject, the driver must appear on the next page once that they fix it:- http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-74273

    I hope this helps.

  • Cannot delete the airplane mode

    Even when I turn off airplane Mode on my phone, it remains on my watch. Mirror of my iphone is not really

    work, or turn it off manually. This is crucial, so any help will be greatly appreciated. Thank you, HAP

    w

    Hi Peter

    It is possible to put the flight to be mirrored between the devices, but the same does not apply to get off airplane Mode, that needs to be done separately on each.

    To change the setting for mirroring of the turn on airplane mode:

    -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

    When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

    To turn off the airplane on your watch Mode:

    -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.

Maybe you are looking for