The effect of ICT controls runs off the screen and the chronology of control carried out does not follow
I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.
How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.
There is no option for this scroll. You will need to zoom out.
Tags: Premiere
Similar Questions
-
OK so my sister has been using my computer last night, when it was made using it she just closed it witch automatically put in mode 'sleep' and gave it back to me. later that night I opened this herd all the normal sounds of the laptop but the backlight does not turn. the screen looks completely black, except that I see a darkness where the hp logo lights across the screen in the lower right corner. in fact when I use the scanner of thumb to activate windows I can see the date and time, dimly lit in this corner and can move the mouse on and see. I connected my laptop to my TV via hdmi and it works absolutely fine, which is how I'M writing this issue right now. I tried to update the drivers for my graphics card, but that did nothing. It's just the backlight does not turn no more. is it far from accidentally turn the backlight on or off? If I have to completely replace the monitor or just replace the lighting? any suggestions?
model: Hp Dv6z
product: A0V78AAR
Windows 7 64 bit
Below is the list of compatible signs:
part number 665334-001
15.6-inch high-definition view bright LED display SVA - Raw Panel only
part number 665335-001
15.6-inch FHD anti-glare LED display WVA - Raw Panel only
Here is the Service Guide. See page 93 and 101.
-
The editor Lite Cinema 4 d does not open of in After Effects.
The editor Lite Cinema 4 d does not open of in After Effects. I am able to create new files of MAXON Cinema 4 d from the file > new menu and comes from the file > export menu. I am able to use cinema 4 d effect on a layer to display a file 'c4d' next to a composition. But when I click on Edition > edit the Original option of a '.cd4' drop my mouse icon changes to "pending" for a second, as if he's going to open something, but then nothing happens.
I'll double check the path of the cinema 4 d application Lite.
I temporarily increased for 'control' permissions on the following folders- Program files (x 86) \Adobe
- \Users\[user]\AppData\Roaming\Adobe
- \Users\[user]\Documents\Adobe
I am running:
After Effects CC 13.7.1.6.
Windows 10 PC
Processor is Intel i7 - 4770 k @ 3.50 GHz
16 GB OF RAM
GeForce GTX 970I found a solution for anyone to live something similar: launch After Effects in as long as administrator and then C4D Lite will launch AE Edit--> Edit Original
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
When I click on Power Options in the Control Panel, it does not. How can I cope?
When I click on Power Options in the Control Panel, it does not. How can I cope?
When I click on Power Options in the Control Panel, it does not. How can I cope?
Make a check of the system files. It's to look for corrupt files. He will try to fix it if it is found.
http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html
Question:
Was there a time when the Power Options in the control panel was admissible?
If Yes, how long?
Would it be too long to do a system restore?
System Restore requires you to choose a date where you did not have this problem as the restore point.
You remember such a date?
How the system restore...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
-
When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you
Hi TaiNguyen95,
· Have updates you installed?
· What is the full error message?
Follow the steps provided by Keith from the link.
-
The settings saved on this computer does not meet the requirements for the network
My old laptop connects fine but my other not. When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."
Hello Tazdmx83,
Thanks for posting on Microsoft answers Community Forums.
This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.
1. click on start and control access panel.
2. double-click on network connections
3. right click on the wireless adapter and select Properties.
4. Select wireless networks, click the name of your wireless network and choose Properties.
5. in network authentication, select open to disable wireless security.
6. Please try to connect.
If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.
http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx
Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.
Remove the driver for the card
========================1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
2. expand "Network adapters", double-click the entry for the wireless network device.
3. click on the "Driver" tab, click "Uninstall".
4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
5 remove the entries related to the wireless network adapter.Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.
Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
It will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
The scanner on my Epson SX525WD does not work on my new Acer's Aspire5742
The scanner on my Epson SX525WD won't work on my new Acer's Aspire5742.I print of the Acer using the cable network and printer. I know that the scanner is good because I can scan of my 'old' Dell laptop using the printer cable. When I try to open Epson Scan on the Acer, it tells me that the scanner has stopped working. I uninstalled and reinstalled, tried different USB ports, running in XP mode (my Acer is Windows 7), but it does not scan. Can you help me?
You have installed the drivers scanner? The Epson SX525WD printer has separate drivers for the scanner, you can download them here and then install them:
http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX525WD/drivers-supportTo see if you have Windows 7 32-bit or 64-bit:
- Open system by clicking the Start button, right-click computer, and then clicking Properties.
- Under system, you can view the type of system, it will say 32 or 64 bits.
How to install a Scanner:
http://Windows.Microsoft.com/en-us/Windows7/install-a-scannerWorking with the scanner and Camera Installation Wizard:
http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-WizardSetting up a printer:
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
Try the printer Troubleshooter
1. open the printer Troubleshooter by clicking the Start button
2. then click on Control Panel
3. in the find what box, type troubleshooting
4. then click on troubleshooting
5. under hardware and sound, click "use a printer.
-
Since the upgrade of my new tab does not work, I press on the + icon and nothing
Since the upgrade of my new tab does not work, I press on the + icon and nothing
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
It also serves as the sites I want to keep are my favorites
Is there an alternatively an add-on for thisHi Wayne_a,
If you are concerened about your privacy you can turn off this feature:
-
I wrote this message 4 times now! Here it is:
I have a MacbookPro. I just bought a new mouse today from the Apple Store, because the little door on the back of my old we kept popping off the power. Now a new does not work with my keyboard and the Apple screen. I use a Logitech keyboard, with which I have never had problems using the old mouse. The batteries seem to work. What is the problem?
What is a wired mouse or a wireless mouse?
-
Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?
You are running a Mac OS X Server software? If so, which version?
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
The HP Client Manager Security extension does not work
I have a red shield on the top right of my address bar saying"
The HP Client Security Manager extension does not work because the HP Client Security Manager plug-in has not been activated.Open the HP Client Security Manager Console browser integration user Page for additional instructions.How can I find a user control panel browser integration page? do not see it anywhere? help needed please thanks Bill
Hello
Unfortunately, you may have to contact HP support for more help:
Kind regards
-
the volume on my laptop lenovo does not work
the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!
Hello
1. you receive an error message?
2 did you change on your computer before this problem?
3. what operating system is installed on your computer?
What version of the operating system Windows am I running?
Follow the suggestions and see if it helps.
Method 1
You can follow the steps and see if it helps.
(a) right click on the Volume icon in the Notification area.
b) click on tab reading.
(c) right click on the box empty.
d) select Show disabled devices.
e) right click speakers and select allow.
f) right click on speakers and go to the Properties.
g) select use this device from the use of the device.
h) click apply and OK.
Method 2
If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
See also:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Sound cards: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Maybe you are looking for
-
2 DRIVERS ARE MISSING - THE TWO PLUG AND PLAY
I HAVE a HP PAVILION DV7 NOTEBOOK PC - MODEL - LM726AV - SERIES - [under the direction of personal information]. I UNINSTALLED NIS (NORTON) BY MISTAKE. SINCE THEN 2 DRIVERS ARE MISSING. 1 BHD64RVX. 2. SYMANTEC IRON DRIVER. WHEN I TRIED TO REINSTALL
-
Zoo Tycoon 2 crosses the installshield but then disappears and does not allow to play.
We just bought this Zoo Tycoon 2 game too and have problems. It goes throughout the installshield Wizard but then disappears and will not play. We have uninstalled and I tried several times, still doesn't work. We have even returned to the store
-
Police did little on certain pages? think that I clicked on something by mistake
IM on a site of social networking and text and all quotations decreased size on my laptop...? How can I get the page back to 100%
-
Cisco ISA disable antivirus for the specified area
Hi I want an option to turn analysis antivirus for a specified area. 'Political IPS and control protocol' has this feature where I can choose what areas to include. I noticed that I couldn't update my ps3 and download a 100% and never collapsed. I tr
-
SSL VPN authentication using RADIUS
I am running version ASA 8.4 (1) and anyconnect version 3.0.1047. My SSL VPN works great, but I encountered a problem with a user. his story did not work, and each time users had this message ""VPN server could not parse request '. " I found the prob